Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2011-05-26
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
guideline study with acceptable restrictions
Qualifier:
equivalent or similar to guideline
Guideline:
EU Method A.3 (Relative Density)
Deviations:
not specified
Principles of method if other than guideline:
The density of the liquid is measured by a pycnometer made of glass with a close-fitting ground glass stopper with a capillary tube through it, so that air bubbles may escape from the apparatus. The device enables a liquid´s density to be measured accurately by reference to an appropriate working fluid using an analytical balance. The flask is weighed empty and full of a liquid whose specific gravity is desired, the specific gravity of the liquid can be then calculated.
GLP compliance:
no
Type of method:
pycnometer method
Key result
Type:
density
Density:
0.884 g/cm³
Temp.:
20 °C
Key result
Type:
relative density
Density:
0.884 other: dimensionless
Temp.:
20 °C
Conclusions:
The density of 1,1-bis(tert-butylperoxy)cyclohexane was determined to be 0.861 g/cm³ at 20 °C.
Executive summary:

A study was conducted in equivalence to Regulation (EC) No 440/2008 method A.3. The density of the 1,1-bis(tert-butylperoxy)cyclohexane 75 % in isododecane was measured by a 25 mL pycnometer at temperature of 20 ± 0.2 °C. The calculated result obtained indicated of a density of 0.861 g/cm³ for 1,1-Di-(tert-butylperoxy) cyclohexan.

Description of key information

Using the pycnometer method, the density of 1,1-Di-(tert-butylperoxy) cyclohexan 80 % in isododecane was determined to be 0.884 g/cm³ at 20 ± 0.2 °C.

Key value for chemical safety assessment

Relative density at 20C:
0.884

Additional information

The density of the test substance 1,1-Di-(tert-butylperoxy) cyclohexan 80 % in isododecane was measured by a 25 mL pycnometer at temperature of 20 ± 0.2 °C. The calculated result obtained indicated of a density of 0.884 g/cm³.