Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Partition coefficient

Currently viewing:

Administrative data

Link to relevant study record(s)

partition coefficient
Type of information:
calculation (if not (Q)SAR)
Adequacy of study:
key study
Study period:
14 May 2012
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
guideline study with acceptable restrictions
according to guideline
other: Computational Approach in OECD Guideline 107 (EU A.8)
Principles of method if other than guideline:
According to the guidance of the ECHA, a ratio calculation is an acceptable alternative for the determination of the octanol/water partition coefficient of surfactants. Citation from ''Guidance on information requirements and chemical safety assessment Chapter R.7a: Endpoint specific guidance'', R.7.1.8 Partition Coefficient, page 102: This method enables partition coefficient to be calculated based on the ratio of the solubility of the material in octanol and water. For some substances (e.g. some surfactants and pigments), it is technically not feasible (or good practice) to measure an octanol-water partition coefficient by OECD 107, and other methods (OECD 117 and QSAR) may be unsuitable as they are based on extrapolations of measured values. For such substances it may be possible to obtain a ratio of the saturated water solubility (OECD 105) and saturated octanol solubility (no guideline currently available but based on the principles of OECD 105). The calculation method however has the drawback that it does not include the interaction between the water and solvent phase (i.e. a chemical with high Pow is rather ‘pushed out of the water’ than ‘pulled into octanol’). This explains the poor correlation typically observed between octanol solubility and Kow (Dearden, 1990, Sijm et al., 1999). The ratio was found somewhat more representative if one uses octanol/saturated water and water/saturated octanol.
GLP compliance:
Type of method:
other: calculated
Partition coefficient type:
log Pow
Partition coefficient:
<= -0.89
20 °C
Remarks on result:
other: pH as measured in the water solubility experiment

n-octanol solubility of the test item: 43.00 g/L at 20 °C

Water solubility of the test item: >= 330 g/L at 20 °C

Pow =< 43/330 = 0.13; log Pow =< -0.89


Description of key information

log Pow =< -0.89 at 20 °C

Key value for chemical safety assessment

Additional information

The partition coefficient of the substance was determined using the calculation method according to OECD Guideline 107 (EU A.8).