Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove from exposure and keep patient at rest. Seek medical
attention immediately.
Emergency measure - Eyes: Irrigate for at least 15 minutes with water and seek medical
attention
Emergency measure - Skin: Wash affected area with copious quantities of water. If
irritation develops seek medical attention.
Emergency measure - Ingestion: Seek medical attention immediately.

Fire-fighting measures

Recommended extinguishing agent: Water spray, foam, dry powder or carbon dioxide may be used.

Product arising from burning: Products of combustion may contain oxides of carbon,
nitrogen and phosphorous together with hydrogen fluoride and
some soot.

Product determined by test: N

Protective equipment: Full breathing apparatus should be worn by fire fighters

Accidental release measures

Emergency measures in case of spillage: Isolate spillage. Avoid dust formation. Gloves, goggles,
dust mask and full personal protective equipment should be
worn. Sweep up spill or use industrial vacuum fitted with
suitable dust filtration system. Transfer to suitably
labelled containers and dispose of in accordance with local
regulations.

Handling and storage

Handling: Avoid contact with eyes, skin and clothing. Protective
rubber gloves (14"PVC Gauntlet), paper suits, safety glasses
(BS2092) and dust masks should be worn. Where dust
generation cannot be avoided, provide local exhaust
ventilation. Where local exhaust ventilation is not
possible, wear an approved face mask.

Storage: The substance should be stored in the original container,
kept tightly closed. The container should be stored at room
temperature in a dry well ventilated room. The containers
are fibre board drums which are double lined with
anti-static polyethylene liners, closed with a lever closing
ring. Each drum contains 25kg of the substance.

Packaging of the substance and or preparation: Containers are fibre board drums, double lined with
anti-static polyethylene liners and closed with a lever
closing ring, 25kg per drum.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: No transport code is available
Transport: Drums are individually loaded on to freight containers.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported

Chemical reaction with water: The substance does not react with water

Dust explosion: Dust Explosion Risk;


Explosion Severity - 20L sphere


Maximum Explosion Pressure (barg) 8.8



Maximum Rate of pressure Rise (bar/s) 602


Kst Value (bar.m/s) 163




Minimum Ignition Energy-(mJ) 10-25


Minimum Ignition Temperature-Dust Cloud (Deg C) 550


Limiting Oxygen Concentration (% by volume) 11.5

Minimum Explosive Concentration (g.m3) 45



Thermal Stability;
Air
Over Layer Test-Onset Temp (Deg C) 140



Electrostatic Risk;

Powder Resistivity (ohm.m) ambient 2.4 x 10 E12

low 2.7 x 10 E13


Charge Relaxation Time ambient 6.5 min

low 1.7 hour

Dust explosion determined by test: Y

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery for recycling is not feasible.

Industry - Possibility of neutralisation: Not possible

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: Incineration is the preferred method of destruction.
Suitable abatement measures for oxides of carbon and
nitrogen should be in place for incineration of gases.
Exhaust gas scrubbing at a suitable facility.

Industry - Possibility of destruction - water purification: Not recommended.

Industry - Possibility of destruction - other: None

Public at large - Possibility of recovery/recycling: Not applicable. The test substance will not enter the public
domain.