Registration Dossier

Administrative data

First-aid measures

Eyes: Rinse with plenty of water for at least ten minutes. If irritation persists, seek medical advice.
Skin: Wash with large quantities of water. If irritation persists obtain medical advice.
Ingestion: Seek medical attention immediately.
Inhalation: Remove the patient to fresh air and keep at rest. Obtain medical attention immediately.

Fire-fighting measures

Recommended extinguishing agents: Carbon dioxide, dry chemical and foam may be used.
Products arising from burning or pyrolysis: Products of conbustion may contain oxides of carbon.
Protection equipment: A self-contained breathing apparatus should be worn.

Accidental release measures

To avoid a possible contamination of the environment, contain spilled material. Cover with an inert, imorganic, non combustible absorbent material, sweep up and remove to an approved disposal container.
Avoid open flames or other sources of ignition.
Avoid inhalation of vapors.

Handling and storage

Handling:
Treat containers with respect to avoid damage. Measures should be taken to prevent materials from being splashed into the eyes or on the skin. This should include the wearing of eyeshields ans protective clothing. Smoking should not be permitted in areas where they are handled.
Storage:
Store separately from oxydising materials.
To be stored in tightly sealed and preferably full containers in a cool, dry and ventilated location. Protect from light.
Store in original container.

Transport information

Land transport (ADR/RID)

Shippingopen allclose all
Remarks:
Not restricted

Inland waterway transport (ADN(R))

Shippingopen allclose all
Remarks
Not restricted

Marine transport (IMDG)

Remarks
Not restricted

Air transport ICAO/IATA

Remarks
Not restricted
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Industrial hygiene:
In accordance with good manufacturing and industrial practices.
Engineering controls:
Extract dust or apour at point of emission. Avoid atomisation. When processed use closed and wxplosionproof electricaél equipment. Take precautions to avoid build-up of electrostatic charges while pouring, pneumatic transport, etc.
Personal protection equipment:
Respiratory protection: In well ventilated areas respiration protection is not normally required. In confined or poorly ventilated areas, the use of an appropriate respiratory protection may be required.
Hand protection: The use of nitrile gloves is recommended.
Eye protection: In general, the use of safety glasses is recommended.
Skin protection: Avoid contact with skin.
Ventilation: provide adequate ventilation; use local exhaust fan if necessary.

Stability and reactivity

Reactivity: No data available.
Conditions to avoid: Excessive heat, open flames or other sources of ignition.

Disposal considerations

Dispose of by incineration in accordance with local regulations