Registration Dossier

Administrative data

First-aid measures

GENERAL INFORMATION
- Immediately remove any clothing soiled by the product.
- After inhalation: Supply fresh air; seek medical treatment in case of complaints.
- After skin contact: Immediately wash with water and soap and rinse thoroughly, if skin irritation continues consult a doctor.
- After eye contact: Rinse opened eye for several minutes under running water, then consult a doctor.
- After swallowing: If swallowed, rinse mouth with water (only if the person is conscious), induce vomiting only, if affected person is fully conscious. Drink plenty of water and provide fresh air. Call for a doctor immediately to seek medical treatment.
- Information for doctor: Treat symptomatically.

Fire-fighting measures

EXTINGUISHING MEDIA
- Suitable extinguishing agents: Water spray, foam, fire-extinguishing powder or carbon dioxide. Use fire extinguishing methods suitable to surrounding conditions.
- Special hazards arising from the substance or mixture: Formation of toxic gases is possible during heating or in case of fire.

ADVICE FOR FIREFIGHTERS
- Protective equipment: Wear self-contained respiratory protective device.
- Additional information: Dispose of fire debris and contaminated firefighting water in accordance with official regulations.

Accidental release measures

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
- Wear protective clothing, ensure adequate ventilation and avoid contact with the eyes and skin.

ENVIRONMENTAL PRECAUTIONS: Do not allow to enter sewers/ surface or ground water.

METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING
- Pick up mechanically. Send for recovery or disposal in suitable receptacles. Dispose of the material collected according to regulations. Neutralise residues on floor with solid sodium carbonate.

Handling and storage

PRECAUTIONS FOR SAFE HANDLING
- Ensure good ventilation/exhaustion at the workplace.
- Wear protective clothing.
- Prevent the formation of dust. Provide suction extractors if dust is formed and any unavoidable deposits of dust must be regularly removed.
- Avoid contact with the eyes and skin.

Information about fire - and explosion protection: No special measures required.
-
Conditions for safe storage, including any incompatibilities
- Requirements to be met by storerooms and receptacles: Store only in the original receptacle.
- Information about storage in one common storage facility: Not required.
- Further information about storage conditions: Keep container tightly sealed, protect from heat and frost.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Additional information about design of technical facilities: Ensure good ventilation/exhaustion at the workplace.

PERSONAL PROTECTIVE EQUIPMENT AND GENERAL HYGIENIC MEASURES
- Do not eat, drink, smoke or sniff while working. Do not inhale dust / smoke / mist. Avoid contact with the eyes and skin. Wash hands before breaks and at the end of work.
- Respiratory protection: Use suitable respiratory protective device when high concentrations are present.
- Recommended filter device for short term use: Filter P2 and Filter FFP2
- Protection of hands: Protective gloves. Material of gloves: Butyl rubber (BR) or Nitrile rubber (NBR). Value for the permeation: Level ≥ 120 min. (EN 374), the exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Eye protection: Safety glasses.
- Body protection: Protective work clothing

Stability and reactivity

CHEMICAL STABILITY
- Thermal decomposition / conditions to be avoided: No decomposition if used and stored according to specifications.
- Possibility of hazardous reactions: Reacts with strong alkali.
- Conditions to avoid: No further relevant information available.
- Incompatible materials: No further relevant information available.
- Hazardous decomposition products: In case of heat, the following can be released: Vapour of acetic acid.

Disposal considerations

WASTE TREATMENT METHODS
- It must be specially treated adhering to official regulations. The disposal must be made according to official regulations.
- Waste disposal key: 51540 (ÖNORM S 2100)
- European waste catalogue: 06 03 14
- Uncleaned packaging recommendation: Packagings that may not be cleaned are to be disposed of in the same manner as the product. Disposal must be made according to official regulations.