Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measure

After inhalation

Move victim to fresh air. Call emergency medical service. Give artificial respiration if victim is not

breathing. Administer oxygen if breathing is difficult. Keep victim warm and quiet. Treat

symptomatically and supportively. Ensure that medical personnel are aware of the material(s)

involved and take precautions to protect themselves.

After Skin contact

Remove and isolate contaminated clothing and shoes. In case of contact with substance,

immediately flush skin with running water for at least 20 minutes. Treat symptomatically and

supportively. Ensure that medical personnel are aware of the material(s) involved and take

precautions to protect themselves

After eye contact

Move victim to fresh air. Check for and remove any contact lenses. In case of contact with

substance, immediately flush eyes with running water for at least 20 minutes. Keep victim warm

and quiet. Treat symptomatically and supportively. Effects of exposure to substance may be

delayed. Ensure that medical personnel are aware of the material(s) involved and take

precautions to protect themselves.

After Ingestion

If a person vomits place them in the recovery position so that vomit will not reenter the mouth

and throat. Rinse mouth. Keep victim warm and quiet. Loosen tight clothing such as a collar, tie,

belt or waistband. If swallowed, seek medical advice immediately and show the container or

label. Treat symptomatically and supportively. Ensure that medical personnel are aware of the

material(s) involved and take precautions to protect themselves. Effects of exposure (ingestion)

to substance may be delayed.

Most important symptoms and effects both acute and delayed

No data available

Indication of any immediate medical attention and special treatment needed

If breathing has stopped, perform artificial respiration. Use first aid treatment according to the

nature of the injury. Ensure that medical personnel are aware of the material(s) involved and

take precautions to protect themselves.

Fire-fighting measures

Extinguishing Media

Suitable extinguishing media: Dry chemical, CO2 , water spray, or alcohol-resistant foam.

Consult with local fire authorities before attempting large scale fire fighting operations

Special hazards arising from the substance or mixture

Hazardous combustion products: These products include: Carbon oxides

Other specific hazards: Closed containers may explode from heat of a fire.

Precautions for fire-fighters

Not available

Special protective equipment for fire-fighters:

Structural fire fighters' protective clothing provides limited protection in fire situations ONLY; it

may not be effective in spill situations.

Further information

No data available

Accidental release measures

Personal precaution, Protective equipments and emergency procedures to be followed

in case of leak or spill

Do not touch damaged containers or spilled material unless wearing appropriate protective

clothing (Section 8).

Wear protective clothing, gloves and eye protection

In case of a spill and/or a leak, always shut off any sources of ignition, ventilate the area, and

exercise caution

Environmental precautions

Prevent entry into sewers, basements or confined areas

Methods and materials for containment and cleaning up

Dike far ahead of liquid spill for later disposal

Prevention of secondary hazard: No data available

Handling and storage

Precautions for safe handling

Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for

preventive fire protection. Follow safe industrial hygiene practices and always wear proper

protective equipment when handling this compound.

Conditions for safe storage, including any incompatibilities

Keep container tightly closed in a dry and well-ventilated place.

Storage incompatibilities

Store away from oxidizing agents.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
non hazardous for transportation
Shippingopen allclose all
Labels:
non hazardous for transportation
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
non hazardous for transportation
Shippingopen allclose all
Labels:
non hazardous for transportation
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
non hazardous for transportation
Shipping information
Proper shipping name and description:
non hazardous for transportation
Chemical name:
non hazardous for transportation
Labels:
non hazardous for transportation
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
non hazardous for transportation
Shipping information
Proper shipping name and description:
non hazardous for transportation
Chemical name:
non hazardous for transportation
Labels:
non hazardous for transportation
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Components with workplace control parameters

Exposure controls

Appropriate engineering controls

Good general ventilation should be sufficient to control airborne levels. Eyewash fountains should

be provided in areas where there is any possibility that workers could be exposed to the

substance. Follow safe industrial engineering/laboratory practices when handling any chemical.

Personal protective equipment

Eye/face protection

Safety glasses

Skin protection

Lab coat

Body Protection

Lab coat

Respiratory protection

Dust respirator. Be sure to use a MSHA/NIOSH approved respirator or equivalent

Control of environmental exposure

No data available

Stability and reactivity

Reactivity

No data available

Chemical Stability

Stable under recommended storage conditions. (See Section 7)

Possibility of hazardous reactions

No hazardous reactivity has been reported

Conditions to Avoid:

Avoid excessive heat and light

Incompatible materials

Oxidizing agents

Hazardous Decomposition Products

No data available

Disposal considerations

Waste treatment methods

Data not available

Products

Recycle to process if possible. It is the generator's responsibility to comply with Federal, State

and Local rules and regulations. You may be able to dissolve or mix material with a combustible

solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.

This section is intended to provide assistance but does not replace these laws, nor does

compliance in accordance with this section ensure regulatory compliance according to the law.

US EPA guidelines for Identification and Listing of Hazardous. Waste are listed in 40 CFR Parts

261.

Contaminated packaging

Dispose of as unused product