Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures

- In case of inhalation: Move victim to fresh air. In case of respiratory difficulties seek medical attention.

- Following skin contact: Wipe affected skin area with cloth. Remove residues with soap and water. In case of skin irritation, consult a physician.

- After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Subsequently consult an ophthalmologist.

- After swallowing: Rinse mouth and drink large quantities of water. Seek medical attention. Never give anything by mouth to an unconscious person.

Most important symptoms and effects, both acute and delayed: No data available

Indication of any immediate medical attention and special treatment needed: Treat symptomatically

Fire-fighting measures

Extinguishing media

- Suitable extinguishing media: Dry extinguishing powder, foam, carbon dioxide.

- Extinguishing media which must not be used for safety reasons: High power water jet

Special hazards arising from the substance or mixture

- In case of fire may be liberated: Silicon compounds, carbon monoxide and carbon dioxide.

Advice for firefighters

- Special protective equipment for firefighters: Wear self-contained breathing apparatus.

- Additional information: Hazchem-Code: -

Accidental release measures

Personal precautions, protective equipment and emergency procedures

- Plug leak if safely possible. Remove all sources of ignition.

- Avoid contact with the substance. Provide adequate ventilation. Do not breathe vapours.

Environmental precautions

- Do not allow to penetrate soil, waterbodies or drains.

Methods and material for containment and cleaning up

- Soak up with absorbent materials such as sand, siliceus earth, acid- or universal binder.

- Store in special closed containers and dispose of according to ordinance.

Reference to other sections

- Refer additionally to section “Exposure controls/personal protection” and “Disposal considerations”.

Handling and storage

Precautions for safe handling

- Advices on safe handling:

Provide adequate ventilation, and local exhaust as needed.

Do not breathe vapours. Avoid contact with skin and eyes.

- Precautions against fire and explosion: Keep away from heat sources, sparks and open flames.

Conditions for safe storage, including any incompatibilities

- Requirements for storerooms and containers:

Keep container tightly closed in a cool place. Store containers in upright position.

Keep away from heat sources, sparks and open flames.

Protect containers against air humidity and water.

Containers will enclose product residues and vapours after being emptied.

Do not re-use the empty container. Protect from punctures by sharp objects.

Specific end use(s)

Silane coupling agent.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not applicable
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not applicable
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not applicable
Shipping information
Proper shipping name and description:
not restricted
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not applicable
Shipping information
Proper shipping name and description:
not restricted
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
No dangerous good in sense of these transport regulations.

Exposure controls / personal protection

Exposure controls:

Make sure there is sufficient air exchange and / or that working rooms are air suctioned.

Personal protection equipment

Occupational exposure controls:

- Respiratory protection:

If vapours form, use respiratory protection.

Use filter type A (= against vapours of organic substances) according to EN 14387.

- Hand protection:

Protective gloves according to EN 374.

Glove material: Plastic or rubber

Breakthrough time: > 480 min

Observe glove manufacturer's instructions concerning penetrability and breakthrough time.

- Eye protection:

Tightly sealed goggles according to EN 166.

- Body protection: Wear suitable protective clothing.

- General protection and hygiene measures:

Wash hands before breaks and after work.

Avoid contact with skin and eyes.

Have eye wash bottle or eye rinse ready at work place.

Do not breathe vapours.

When using do not eat, drink or smoke.

Stability and reactivity

Reactivity: Hydrolyzes with water.

Chemical stability: Product is stable under normal storage conditions.

Possibility of hazardous reactions: Hazardous polymerisation: Will not occur.

Conditions to avoid: Protect from humidity and water.

Incompatible materials: Water, acids, alkalis.

Hazardous decomposition products:

- Ethanol (Highly flammable.)

- Thermal decomposition: No data available

Disposal considerations

Waste treatment methods

Product:

- Waste key number: 07 02 17 = Waste containing silicones

- Recommendation: Destroy material in a hazardous waste incinerator equipped with afterburner and filters.

Contaminated packaging:

- Waste key number: 15 01 04 = Metallic packaging or 150102 = Plastic packaging

- Recommendation:

Empty carefully and completely, if possible.

Dispose of waste according to applicable legislation.

Handle contaminated packages in the same way as the substance itself.