Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:

Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs.

Skin Contact: Wash with soap and water. Get medical attention if irritation develops.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention
immediately.

Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get
medical attention if symptoms appear.

Notes to physician: Treat supportively and symptomatically.

Fire-fighting measures

General fire hazards: Tests show a minimum ignition energy between 1 and 3 milliJoules. At this energy level all plant and equipment should be
grounded. Restrict the use of high resistivity materials (plastics). Precautions should be as for flammable liquids and gasses
when ignition energy is at this level.

Extinguishing media: Use foam or all purpose dry chemicals to extinguish. This material is very toxic to aquatic organisms. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.

Unsuitable extinguishing media: None known.

Advice for firefighters:
Special Fire Fighting Procedures: Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Immediately contact emergency
personnel. Keep unnecessary personnel away. Follow all fire fighting
procedures.


Methods and material for containment and cleaning up: If emergency personnel are unavailable vacuum or carefully scoop up spilled materials and place in an appropriate container for disposal. Avoid creating dusty conditions and
prevent wind dispersal. Minimize contact of spilled material with soils to prevent runoff to
surface waterways.

Handling and storage

Precautions for safe handling: Avoid contact of spilled material and runoff with soil and surface waterways.


Conditions for safe storage, including any incompatibilities: Keep container tightly closed. Keep container in a cool, well-ventilated area

Transport information

Land transport (ADR/RID)

UN number:
ADR/RID: Not regulated.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
ADR/RID: Not regulated.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
IMDG: not regulated
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
IATA - International Air Transport Association: Not regulated.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls:
Appropiate engineering controls: Use feasible engineering controls to minimize exposure to compound.

Individual protection measures, such as personal protective equipment:
Eye/face protection: Safety glasses with side shields. Where the work environment or activity involves dusty conditions, mists or aerosols, wear the
appropriate goggles. Wear a faceshield or other full face protection if there is a potential for direct contact to the face with
dusts, mists, or aerosols.

Skin protection: Disposable chemical resistant gloves

Respiratory Protection: Use an appropriate approved air-purifying respirator equipped with HEPA cartridges/canisters where there is the potential for exceeding established occupational exposure limits or occupational exposure bands. When handling a compound in
solution, a cartridge/canister appropriate for the solution may also be needed. Use a positive pressure, air-supplied,
pressure demand tight fitting respirator (e.g., SCBA or airline equipped with emergency escape bottle) where there is a
potential for uncontrolled releases in excess of the respirator's capabiliites, where exposure levels are unknown or where air-purifying respirators may not provide adequate protection.


Stability and reactivity

Reactivity: No data available.

Chemical stability: Stable

Possibility of hazardous reactions: Will not occur.

Conditions to avoid: Exposure to light.

Incompatible materials: Oxidizing/reducing agents. Strong acids/bases.

Hazardous decomposition products: These products are carbon oxides, nitrogen oxides.

Disposal considerations

Waste treatment methods:
Disposal Methods: Avoid contact of spilled material and runoff with soil and surface waterways. Dispose of or treat all spill residues including
contaminated soils following all applicable regulations.