Registration Dossier

Administrative data

First-aid measures

Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured
INHALATION
Remove from further exposure. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation. Immediately remove from further exposure. Get immediate medical assistance. For those providing assistance, avoid exposure to yourself or others. Use adequate respiratory protection. Give supplemental oxygen, if available. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.

SKIN CONTACT
Wash contact areas with soap and water. Remove contaminated clothing. Launder contaminated clothing before reuse. For hot product: Immediately immerse in or flush affected area with large amounts of cold water to dissipate heat. Cover with clean cotton sheeting or gauze and get prompt medical attention.

EYE CONTACT
Flush thoroughly with water. If irritation occurs, get medical assistance.

INGESTION
First aid is normally not required. Seek medical attention if discomfort occurs.

Fire-fighting measures

Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured
EXTINGUISHING MEDIA
Appropriate Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.

FIRE FIGHTING
Fire Fighting Instructions: Evacuate area. Prevent run-off from fire control or dilution from entering streams, sewers or drinking water supply. Fire-fighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray to cool fire exposed surfaces and to protect personnel.

Hazardous Combustion Products: None.

FLAMMABILITY PROPERTIES
Flash Point [Method]: >160C (320F)
Flammable Limits (Approximate volume % in air): LEL: N/D UEL: N/D
Autoignition Temperature: 320°C (608°F)

Accidental release measures

Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured
NOTIFICATION PROCEDURES
In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable regulations.


SPILL MANAGEMENT
Land Spill:

Water Spill: Stop leak if you can do so without risk. Material will sink. Remove material, as much as possible, using mechanical equipment.

Water spill and land spill recommendations are based on the most likely spill scenario for this material; however, geographic conditions, wind, temperature, (and in the case of a water spill) wave and current direction and speed may greatly influence the appropriate action to be taken. For this reason, local experts should be consulted. Note: Local regulations may prescribe or limit action to be taken.

ENVIRONMENTAL PRECAUTIONS
Remove debris in path of spill prior to oiling and remove contaminated debris from shoreline and water surface. Dispose of according to local regulations. Prevent entry into waterways, sewers, basements or confined areas.

Handling and storage

Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured
HANDLING
Avoid contact with skin. Prevent small spills and leakage to avoid slip hazard. Products may load from Infineum manufacturing site above the standard loading/unloading range.

Loading/Unloading Temperature: 50°C (122°F) - 80°C (176°F)

Transport Temperature: N/D
Transport Pressure: [Ambient]

Static Accumulator: This material is not a static accumulator.

STORAGE
Nitrogen blanketing of containers is required. Do not store in open or unlabelled containers.
Storage Temperature: <= 60°C (140°F)
Storage Pressure: [Ambient]

Suitable Containers/Packing: Tank Trucks; Drums; Tank Cars
Suitable Materials and Coatings (Chemical Compatibility): Carbon Steel; Stainless Steel
Unsuitable Materials and Coatings: Butyl Rubber; Rubber; PVC; Plastics

Transport information

Land transport (ADR/RID)

UN number:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Land Transport
Shippingopen allclose all
Class:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Land Transport
Classification code:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Land Transport
Packaging group:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Land Transport
Labels:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Land Transport
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Inland Waterways Transport
Shippingopen allclose all
Class:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Inland Waterways Transport
Classification code:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Inland Waterways Transport
Packaging group:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Inland Waterways Transport
Labels:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Inland Waterways Transport
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Sea Transport according to IMDG-Code
Proper shipping name and description:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Sea Transport according to IMDG-Code
Chemical name:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Sea Transport according to IMDG-Code
Class:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Sea Transport according to IMDG-Code
Packaging group:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Sea Transport according to IMDG-Code
EmS code:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Sea Transport according to IMDG-Code
Labels:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Sea Transport according to IMDG-Code
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Air Transport
Proper shipping name and description:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Air Transport
Chemical name:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Air Transport
Class:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Air Transport
Packaging group:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Air Transport
Labels:
Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured - Not Regulated for Air Transport
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured
Exposure limits/standards for materials that can be formed when handling this product: When mists / aerosols can occur, the following are recommended: 5 mg/m³ - ACGIH TLV, 10 mg/m³ - ACGIH STEL.

Note: Information about recommended monitoring procedures can be obtained from the relevant agency(ies)/institute(s):
UK Health and Safety Executive (HSE)
ENGINEERING CONTROLS

The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Control measures to consider:
No special requirements under ordinary conditions of use and with adequate ventilation.

PERSONAL PROTECTION

Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation. Information on the selection of protective equipment for use with this material, as provided below, is based upon intended, normal usage.

Respiratory Protection: If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators to be considered for this material include:
No special requirements under ordinary conditions of use and with adequate ventilation. Particulate

For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.

Hand Protection: Any specific glove information provided is based on published literature and glove manufacturer data. Glove suitability and breakthrough time will differ depending on the specific use conditions. Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Inspect and replace worn or damaged gloves. The types of gloves to be considered for this material include:
Thermally protective, chemical resistant gloves are recommended. If contact with forearms is likely, wear gauntlet-style gloves. If prolonged or repeated contact is likely, chemical-resistant gloves are recommended. If contact with forearms is likely, wear gauntlet-style gloves. Nitrile, Polyvinyl Chloride (PVC)

Eye Protection: If contact is likely, safety glasses with side shields are recommended. If contact with material may occur, safety glasses and face shield are recommended.

Skin and Body Protection: Any specific clothing information provided is based on published literature or manufacturer data. The types of clothing to be considered for this material include:
If prolonged or repeated contact is likely, chemical, and oil resistant clothing is recommended. If product is hot, thermally protective, chemical resistant apron and long sleeves are recommended.

Specific Hygiene Measures: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Discard contaminated clothing and footwear that cannot be cleaned. Practice good housekeeping

Stability and reactivity

Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured
STABILITY: Material is stable under normal conditions.

CONDITIONS TO AVOID: Excessive heat. Elevated temperatures.

MATERIALS TO AVOID: Strong oxidisers, Strong Acids

HAZARDOUS DECOMPOSITION PRODUCTS: Material does not decompose at ambient temperatures.

HAZARDOUS POLYMERIZATION: Will not occur.

Disposal considerations

Based on the substance in 50-70% Highly Refined Mineral Oil as manufactured
Disposal recommendations based on material as supplied. Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal.

DISPOSAL RECOMMENDATIONS
Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.

REGULATORY DISPOSAL INFORMATION

European Waste Code: 13 02 XX

NOTE: These codes are assigned based upon the most common uses for this material and may not reflect contaminants resulting from actual use. Waste producers need to assess the actual process used when generating the waste and its contaminants in order to assign the proper waste disposal code(s).

Empty Container Warning Empty Container Warning (where applicable): Empty containers may contain residue and can be dangerous. Do not attempt to refill or clean containers without proper instructions. Empty drums should be completely drained and safely stored until appropriately reconditioned or disposed. Empty containers should be taken for recycling, recovery, or disposal through suitably qualified or licensed contractor and in accordance with governmental regulations. DO NOT PRESSURISE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.