Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 276-172-8 | CAS number: 71902-20-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Endpoint summary
Administrative data
Description of key information
Skin irritation:
The test item was not classified as a skin irritant according to the Regulation (EC) No. 1272/2008 Classification, Labelling and Packaging of Substances and Mixtures (EU CLP).
Eye irritation:
In a study performed to the standardized guidelines OECD 437 and EU Test Method B.47., under GLP conditions, the undiluted test item was applied for 10 minutes followed by an incubation period of 120 minutes. Negative (0.9% (w/v) Sodium Chloride) and positive (Neat Ethanol) control items were tested concurrently. The two endpoints, decreased light transmission through the cornea (opacity) and increased passage of sodium fluorescein dye through the cornea (permeability) were combined in an empirically derived formula to generate an In Vitro Irritancy Score (IVIS) of 10.5. Based on the results of the BCOP test, no prediction of eye irritation can be made for the test item according to UN GHS or EU CLP (Envigo, 2018).
Key value for chemical safety assessment
Skin irritation / corrosion
Link to relevant study records
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 08 February 2018 to ****
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- Purity: 100%
Storage: Room temperature in the dark - Test system:
- human skin model
- Source species:
- human
- Cell type:
- other: reconstructed human epidermis tissues
- Cell source:
- other: No specified
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- Triplicate tissues were treated with the test item for an exposure period of 15 minutes. At the end of the exposure period each tissue was rinsed before incubating for 42 hours. The test item was found to directly reduce MTT in the pre-test for direct MTT reduction and therefore additional non-viable tissues were incorporated into the testing for correction purposes. At the end of the post exposure incubation period each tissue was taken for MTT-loading. The maintenance medium from beneath each tissue was transferred to pre labeled micro tubes and stored in a freezer for possible inflammatory mediator IL-1α determination. After MTT-loading a total biopsy of each epidermis was made and placed into micro tubes containing acidified isopropanol for extraction of formazan crystals out of the MTT loaded tissues.
At the end of the formazan extraction period each tube was mixed thoroughly and duplicate 200 µL samples were transferred to the appropriate wells of a pre labeled 96 well plate. The optical density was measured at 570 nm (OD570). - Control samples:
- other: Negative Control: Dulbecco’s Phosphate Buffered Saline (DPBS) with Ca++ and Mg++ and Positive Control: Sodium Dodecyl Sulphate (SDS)
- Amount/concentration applied:
- 10 µL (26.3 µL/cm2) of the test item was applied to the epidermis surface.
- Duration of treatment / exposure:
- Triplicate tissues were treated with the test item for an exposure period of 15 minutes.
- Duration of post-treatment incubation (if applicable):
- At the end of the exposure period each tissue was rinsed before incubating for 42 hours.
- Number of replicates:
- Three
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- using the EPISKINTM reconstructed human epidermis model after a treatment period of 15 minutes followed by a post exposure incubation period of 42 hours
- Value:
- 101.7
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- no indication of irritation
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The test item was not classified as a skin irritant according to the Regulation (EC) No. 1272/2008 Classification, Labelling and Packaging of Substances and Mixtures (EU CLP).
- Executive summary:
The purpose of this test was to evaluate the skin irritation potential of the test material using the EPISKINTMreconstructed human epidermis model after a treatment period of 15 minutes followed by a post‑exposure incubation period of 42 hours. The principle of the assay was based on the measurement of cytotoxicity in reconstructed human epidermal cultures following topical exposure to the test item by means of the colorimetric MTT reduction assay. Cell viability is measured by enzymatic reduction of the yellow MTT tetrazolium salt (3‑[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide) to a blue/purple formazan salt (within the mitochondria of viable cells) in the test item treated tissues relative to the negative controls.
Triplicate tissues were treated with the test item for an exposure period of 15 minutes. At the end of the exposure period each tissue was rinsed before incubating for 42 hours. The test item was found to directly reduce MTT in the pre-test for direct MTT reduction and therefore additional non-viable tissues were incorporated into the testing for correction purposes. At the end of the post exposure incubation period each tissue was taken for MTT-loading. The maintenance medium from beneath each tissue was transferred to pre labeled micro tubes and stored in a freezer for possible inflammatory mediator IL-1α determination. After MTT-loading a total biopsy of each epidermis was made and placed into micro tubes containing acidified isopropanol for extraction of formazan crystals out of the MTT loaded tissues.
At the end of the formazan extraction period each tube was mixed thoroughly and duplicate 200 µL samples were transferred to the appropriate wells of a pre‑labeled 96‑well plate. The optical density was measured at 570 nm (OD570).
The relative mean viability of the test item treated tissues was 101.7% after the 15‑minute exposure period and 42‑hours post‑exposure incubation period.
The relative mean viability for tissues treated with 5% (w/v) SDS aqueous solution (positive control) was 2.7% relative to the negative control treated tissues and the standard deviation value of the viability was 0.6% (≤18%). The positive control acceptance criteria were therefore satisfied.
The mean OD570for the negative control (DPBS) treated tissues was 0.736, within the range of 0.6 - 1.5 and the standard deviation value of the viability was 1.2% (≤18%). The negative control acceptance criteria were therefore satisfied.
The standard deviation calculated from individual tissue viabilities of the three identically test item treated tissues was 14.8% (≤18%). The test item acceptance criterion was therefore satisfied.
The test item was not classified as a skin irritant according to the Regulation (EC) No. 1272/2008 Classification, Labelling and Packaging of Substances and Mixtures (EU CLP).
Reference
Test for Direct MTT Reduction
The MTT solution containing the test item turned purple which indicated that the test item directly reduced MTT. Therefore, an additional procedure using water-killed tissues was performed. However, the results obtained showed that no effects on OD570values (Appendix 2) that indicated the test item was totally rinsed off with no residual test item remained on or in the tissues. It was therefore considered unnecessary to use the results of the water-killed tissues for quantitative correction of results.
Test Item, Positive Control Item and Negative Control Item
The relative mean viability of the test item treated tissues was 101.7% (>50%) after a 15‑minute exposure period and 42‑hour post‑exposure incubation period.
Traces of residual test item remained on the test item treated tissue culture surfaces after rinsing due to viscosity.
Assessment of Color Interference with the MTT endpoint
The solution containing the test item was a yellow color. This color was attributed to the intrinsic color of the test item itself. It was therefore unnecessary to run color correction tissues.
Quality Criteria
The relative mean viability for tissues treated with 5% (w/v) SDS aqueous solution (positive control) was 2.7% relative to the negative control treated tissues and the standard deviation value of the viability was 0.6% (≤18%). The positive control acceptance criteria were therefore satisfied.
The mean OD570for the negative control (DPBS) treated tissues was 0.736, within the range of 0.6 - 1.5 and the standard deviation value of the viability was 1.2% (≤18%). The negative control acceptance criteria were therefore satisfied.
The standard deviation calculated from individual tissue viabilities of the three identically test item treated tissues was 14.8% (≤18%). The test item acceptance criterion was therefore satisfied.
Individual and Mean OD562 Values and Viabilities for the Negative Control Item, Positive Control Item and Test Item
Item |
OD570of tissues |
Mean OD570of triplicate tissues |
±SDof OD570 |
Relative individual tissue viability (%) |
Relative mean viability (%) |
± SD of Relative mean viability (%) |
Negative Control ItemÅ |
0.743 |
0.736 |
0.009 |
100.9 |
100* |
1.2 |
0.726 |
98.6 |
|||||
0.740 |
100.5 |
|||||
Positive Control ItemÅ |
0.019 |
0.020 |
0.004 |
2.6 |
2.7 |
0.6 |
0.016 |
2.2 |
|||||
0.024 |
3.3 |
|||||
Test Item |
0.846 |
0.749 |
0.109 |
114.9 |
101.7 |
14.8 |
0.771 |
104.7 |
|||||
0.631 |
85.7 |
The mean viability of the negative control tissues is set at 100%
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Eye irritation
Link to relevant study records
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 22 February 2018 to 28 August 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU method B.47 (Bovine corneal opacity and permeability test method for identifying ocular corrosives and severe irritants)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- Purity: 100%
Description: Amber colored viscous liquid - Species:
- cattle
- Strain:
- not specified
- Details on test animals or tissues and environmental conditions:
- Eyes from adult cattle (typically 12 to 60 months old) were obtained from a local abattoir as a by-product from freshly slaughtered animals. The eyes were excised by an abattoir employee after slaughter, and were placed in Hanks’ Balanced Salt Solution (HBSS) supplemented with antibiotics (penicillin at 100 IU/mL and streptomycin at 100 µg/mL). They were transported to the test facility over ice packs on the same day of slaughter. The corneas were prepared immediately on arrival.
- Vehicle:
- unchanged (no vehicle)
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- 0.75 mL of the test material or control items were applied to the appropriate corneas
- Duration of treatment / exposure:
- Each holder was incubated, anterior chamber uppermost, at 32 ± 1 ºC for 10 minutes
- Duration of post- treatment incubation (in vitro):
- 120 minutes
- Number of animals or in vitro replicates:
- Three
- Details on study design:
- Preparation of Corneas
The cornea from each selected eye was removed leaving a 2 to 3 mm rim of sclera to facilitate handling. The iris and lens were peeled away from the cornea. The isolated corneas were immersed in a dish containing HBSS until they were mounted in Bovine Corneal Opacity and Permeability (BCOP) holders.
The anterior and posterior chambers of each BCOP holder were filled with complete Eagle’s Minimum Essential Medium (EMEM) without phenol red and plugged. The holders were incubated at 32 ± 1 ºC for 60 minutes. At the end of the incubation period each cornea was examined for defects. Only corneas free of damage were used.
Treatment of Corneas
The EMEM was removed from the anterior chamber of the BCOP holder and 0.75 mL of the test item or control items were applied to the appropriate corneas. The holders were gently tilted back and forth to ensure a uniform application of the item over the entire cornea. Each holder was incubated, anterior chamber uppermost, at 32 ± 1 ºC for 10 minutes.
At the end of the exposure period the test item and control items were removed from the anterior chamber and the cornea was rinsed 3 times with fresh complete EMEM containing phenol red before a final rinse with complete EMEM without phenol red. The anterior chamber was refilled with fresh complete EMEM without phenol red. A post treatment opacity reading was taken and each cornea was visually observed.
The holders were incubated, anterior chamber facing forward, at 32 ± 1 ºC for 120 minutes.
After incubation the holders were removed from the incubator, the medium from both chambers was replaced with fresh complete EMEM and a final opacity reading was taken. Each cornea was visually observed.
Application of Sodium Fluorescein
Following the final opacity measurement the permeability of the corneas to sodium fluorescein was evaluated. The medium from the anterior chamber was removed and replaced with 1 mL of sodium fluorescein solution (4 mg/mL). The dosing holes were plugged and the holders incubated, anterior chamber uppermost, at 32 ± 1 ºC for 90 minutes.
Permeability Determinations
After incubation the medium in the posterior chamber of each holder was decanted and retained.
360 µL of media representing each cornea was dispensed into the appropriate wells of a pre labeled 96 well plate. The optical density was measured (quantitative viability analysis) at 492 nm (without a reference filter) using the Labtech LT-4500 microplate reader. - Irritation parameter:
- in vitro irritation score
- Run / experiment:
- 1
- Value:
- 10.5
- Vehicle controls validity:
- not applicable
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- Corneal Epithelium Condition
The corneas treated with the test item were slightly cloudy post treatment and post incubation. The corneas treated with the negative control item were clear post treatment and post incubation. The corneas treated with the positive control item were cloudy post treatment and post incubation.
Criteria for an Acceptable Test
The positive control In Vitro Irritancy Score was within the historical range of 29.6 to 65.1. The positive control acceptance criterion was therefore satisfied. The negative control gave opacity of ≤ 2.3 and permeability ≤ 0.041. The negative control acceptance criteria were therefore satisfied.
Test Item
The in vitro irritancy score of the test material was 10.5, based on this result, no prediction of eye irritation can be made for the test material. - Interpretation of results:
- GHS criteria not met
- Conclusions:
- Based on the results of the BCOP test, no prediction of eye irritation can be made for the test item according to UN GHS or EU CLP.
- Executive summary:
In a study performed to the standardized guidelines OECD 437 and EU Test Method B.47., under GLP conditions, the undiluted test item was applied for 10 minutes followed by an incubation period of 120 minutes. Negative (0.9% (w/v) Sodium Chloride) and positive (Neat Ethanol) control items were tested concurrently. The two endpoints, decreased light transmission through the cornea (opacity) and increased passage of sodium fluorescein dye through the cornea (permeability) were combined in an empirically derived formula to generate an In Vitro Irritancy Score (IVIS) of 10.5. Based on the results of the BCOP test, no prediction of eye irritation can be made for the test item according to UN GHS or EU CLP.
Reference
In Vitro Irritancy Score
Treatment |
In Vitro Irritancy Score |
Test Item |
10.5 |
0.9% (w/v) Sodium Chloride (Negative Control) |
0.8 |
Neat Ethanol (Positive Control) |
37.6 |
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (not irritating)
Respiratory irritation
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Justification for classification or non-classification
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.