Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 847-736-6 | CAS number: 2001653-49-0
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
∙ General information:
Immediately remove any clothing soiled by the product.
Do not leave affected persons unattended.
∙ After inhalation:
Keep quiet
Supply fresh air; consult doctor in case of complaints.
∙ After skin contact:
Immediately remove any clothing soiled by the product.
Immediately wash skin with plenty of water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
∙ After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.
Protect unharmed eye.
∙ After swallowing: Seek immediate medical advice.
Most important symptoms and effects, both acute and delayed No further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
∙ General information:
Immediately remove any clothing soiled by the product.
Do not leave affected persons unattended.
∙ After inhalation:
Keep quiet
Supply fresh air; consult doctor in case of complaints.
∙ After skin contact:
Immediately remove any clothing soiled by the product.
Immediately wash skin with plenty of water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.
∙ After eye contact:
Rinse opened eye for several minutes under running water. Then consult a doctor.
Protect unharmed eye.
∙ After swallowing: Seek immediate medical advice.
Most important symptoms and effects, both acute and delayed No further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
Fire-fighting measures
Extinguishing media
∙ Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
∙ For safety reasons unsuitable extinguishing agents:
Water with full jet
Special hazards arising from the substance or mixture
In case of fire, the following can be released:
Carbon monoxide (CO)
Under certain fire conditions, traces of other toxic gases cannot be excluded.
Advice for firefighters
∙ Protective equipment:
Wear self-contained respiratory protective device.
Do not inhale explosion gases or combustion gases.
∙ Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Collect contaminated fire fighting water separately. It must not enter the sewage system.
Cool exposed containers to the heat by pulverizing water.
∙ Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
∙ For safety reasons unsuitable extinguishing agents:
Water with full jet
Special hazards arising from the substance or mixture
In case of fire, the following can be released:
Carbon monoxide (CO)
Under certain fire conditions, traces of other toxic gases cannot be excluded.
Advice for firefighters
∙ Protective equipment:
Wear self-contained respiratory protective device.
Do not inhale explosion gases or combustion gases.
∙ Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Collect contaminated fire fighting water separately. It must not enter the sewage system.
Cool exposed containers to the heat by pulverizing water.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Do not allow to enter sewers/ surface or ground water.
Inform respective authorities in case of seepage into water course or sewage system.
Methods and material for containment and cleaning up:
Dyke up, pump or absorb liquid components with an inert liquid-binding material.
Ensure adequate ventilation.
Dispose of the material collected according to regulations.
∙ 6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Do not allow to enter sewers/ surface or ground water.
Inform respective authorities in case of seepage into water course or sewage system.
Methods and material for containment and cleaning up:
Dyke up, pump or absorb liquid components with an inert liquid-binding material.
Ensure adequate ventilation.
Dispose of the material collected according to regulations.
∙ 6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling and storage
Precautions for safe handling Ensure good ventilation/exhaustion at the workplace.
∙ Information about fire - and explosion protection: Emergency cooling must be available in case of nearby fire.
Conditions for safe storage, including any incompatibilities
∙ Storage:
∙ Requirements to be met by storerooms and receptacles: No special requirements.
∙ Information about storage in one common storage facility: Not required.
∙ Further information about storage conditions: Store in cool, dry conditions in well sealed receptacles.
Specific end use(s) No further relevant information available.
∙ Information about fire - and explosion protection: Emergency cooling must be available in case of nearby fire.
Conditions for safe storage, including any incompatibilities
∙ Storage:
∙ Requirements to be met by storerooms and receptacles: No special requirements.
∙ Information about storage in one common storage facility: Not required.
∙ Further information about storage conditions: Store in cool, dry conditions in well sealed receptacles.
Specific end use(s) No further relevant information available.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
∙ Ingredients with limit values that require monitoring at the workplace: Not required.
∙ Additional information: The lists valid during the making were used as basis.
Exposure controls
∙ Personal protective equipment:
∙ General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Avoid contact with the eyes and skin.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Keep away from foodstuffs, beverages and feed.
∙ Respiratory protection:
Not necessary in normal conditions of use
Where risk assessment shows air-purifying respirators are appropriate use a mask filter with multi-purpose
combination (US) or type ABEK according standard EN 14387) respirator cartridges
∙ Protection of hands:
Protective gloves
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Neoprene gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
∙ Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
∙ Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
∙ Eye protection:
Safety glasses
∙ Body protection: Protective work clothing
∙ Ingredients with limit values that require monitoring at the workplace: Not required.
∙ Additional information: The lists valid during the making were used as basis.
Exposure controls
∙ Personal protective equipment:
∙ General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Avoid contact with the eyes and skin.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Keep away from foodstuffs, beverages and feed.
∙ Respiratory protection:
Not necessary in normal conditions of use
Where risk assessment shows air-purifying respirators are appropriate use a mask filter with multi-purpose
combination (US) or type ABEK according standard EN 14387) respirator cartridges
∙ Protection of hands:
Protective gloves
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Neoprene gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
∙ Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
∙ Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
∙ Eye protection:
Safety glasses
∙ Body protection: Protective work clothing
Stability and reactivity
Reactivity No further relevant information available.
Chemical stability
∙ Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions
Reacts with strong oxidising agents.
Reacts with strong alkali.
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.
Chemical stability
∙ Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions
Reacts with strong oxidising agents.
Reacts with strong alkali.
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.
Disposal considerations
Waste treatment methods
∙ Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Hand over to hazardous waste disposers.
Must be specially treated adhering to official regulations.
∙ Uncleaned packaging:
∙ Recommendation: Disposal must be made according to official regulations.
∙ Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Hand over to hazardous waste disposers.
Must be specially treated adhering to official regulations.
∙ Uncleaned packaging:
∙ Recommendation: Disposal must be made according to official regulations.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
