EÜ loetelu

EÜ loetelu

Pesastatud rakendused

EÜ loetelu

The EC inventory published below is a copy as received from the JRC in 2008 on the founding of ECHA. It is comprised of the following lists:

  • EINECS (European INventory of Existing Commercial chemical Substances) as published in O.J. C 146A, 15.6.1990. EINECS is an inventory of substances that were deemed to be on the European Community market between 1 January 1971 and 18 September 1981. EINECS was drawn up by the European Commission in the application of Article 13 of Directive 67/548/EEC, as amended by Directive 79/831/EEC, and in accordance with the detailed provisions of Commission Decision 81/437/EEC. Substances listed in EINECS are considered phase-in substances under the REACH Regulation.
  • ELINCS (European LIst of Notified Chemical Substances) in support of Directive 92/32/EEC, the 7th amendment to Directive 67/548/EEC. ELINCS lists those substances which were notified under Directive 67/548/EEC, the Dangerous Substances Directive Notification of New Substances (NONS) that became commercially available after 18 September 1981.
  • NLP (No-Longer Polymers).  The definition of polymers was changed in April 1992 by Council Directive 92/32/EEC amending Directive 67/548/EEC, with the result that substances previously considered to be polymers were no longer excluded from regulation. Thus the No-longer Polymers (NLP) list was drawn up, consisting of such substances that were commercially available between 18 September 1981 and 31 October 1993.
Database contains 106212 unique substances/entries.
Filter the list

The List does not contain any Substances.
 
Solids from combustion of municipal refuse, non-combustible which remain on the gratings. The major components are glass, ceramics, brick, rubble, gravel and ferrous and non-ferrous metals.
293-798-7
91082-83-6
Solids from combustion of municipal refuse, non-combustible which remain on the gratings. The major components are glass, ceramics, brick, rubble, gravel and ferrous and non-ferrous metals.
Details
The slag or residue obtained when lead/silver anodes used in the electrolytic production of zinc are recast. Fusion of the alloys of lead and silver (manganese may also be present) and simultaneous oxidation occur.
305-449-9
94552-05-3
The slag or residue obtained when lead/silver anodes used in the electrolytic production of zinc are recast. Fusion of the alloys of lead and silver (manganese may also be present) and simultaneous oxidation occur.
Details
By-product from high speed steel manufacture containing Al, C, Fe, Mo and W (as grindings) and CaO, CoO, Cr2O3, FeO, MoO3, V2O5 and WO3 (as burned slag).
293-797-1
91082-82-5
By-product from high speed steel manufacture containing Al, C, Fe, Mo and W (as grindings) and CaO, CoO, Cr2O3, FeO, MoO3, V2O5 and WO3 (as burned slag).
Details
Substance formed by the galvanizing of iron-containing materials in the galvanizing tanks. Consists primarily of intermetallic compounds of zinc and iron along with other nonferrous metals and compounds.
297-919-4
93763-98-5
Substance formed by the galvanizing of iron-containing materials in the galvanizing tanks. Consists primarily of intermetallic compounds of zinc and iron along with other nonferrous metals and compounds.
Details
The product obtained during production of castings with lost molds and cores. Composed primarily of quartz sand or chromium, olivine or zirconium ore sand that contains clay, coal dust constituents, synthetic resins and reaction products formed by thermal effects.
310-071-2
102110-69-0
The product obtained during production of castings with lost molds and cores. Composed primarily of quartz sand or chromium, olivine or zirconium ore sand that contains clay, coal dust constituents, synthetic resins and reaction products formed by thermal effects.
Details
310-070-7
102110-68-9
Details
Copper anodes which have been corroded during the electrolytic refining of copper. They consist principally of copper with traces of other metals, including some metal oxides.
273-719-2
69012-19-7
Copper anodes which have been corroded during the electrolytic refining of copper. They consist principally of copper with traces of other metals, including some metal oxides.
Details
Residues of slimes and slags produced in copper refining furnaces.
273-718-7
69012-18-6
Residues of slimes and slags produced in copper refining furnaces.
Details
Anode residue composed primarily of the oxides of copper, iron and silcon. It may contain other non-ferrous metals.
285-573-7
85117-21-1
Anode residue composed primarily of the oxides of copper, iron and silcon. It may contain other non-ferrous metals.
Details
A precipitation product of dye production. Composed primarily of copper (II) phosphate with minor amounts of basic copper (II) carbonate and copper (II) acetate.
305-448-3
94552-02-0
A precipitation product of dye production. Composed primarily of copper (II) phosphate with minor amounts of basic copper (II) carbonate and copper (II) acetate.
Details
Substance obtained during processing of anthrasol dyes. Consists primarily of metallic copper with compounds of aluminum, barium, calcium, iron, potassium and titanium as minor components.
305-447-8
94552-01-9
Substance obtained during processing of anthrasol dyes. Consists primarily of metallic copper with compounds of aluminum, barium, calcium, iron, potassium and titanium as minor components.
Details
Cleanings from tanks used to cool copper castings.
273-717-1
69012-17-5
Cleanings from tanks used to cool copper castings.
Details
296-081-7
92202-46-5
Details
Impure copper cathodes formed during the electrolytic demetalizing of spent copper refining electrolyte. It consists primarily of copper with varing levels of antimony, arsenic, bismuth, lead and nickel.
273-720-8
69012-20-0
Impure copper cathodes formed during the electrolytic demetalizing of spent copper refining electrolyte. It consists primarily of copper with varing levels of antimony, arsenic, bismuth, lead and nickel.
Details
Substance obtained from burning of insulated cable and wire. Contains mainly CuO and may contain carbonaceous residues and small amounts of lead and chlorine.
286-649-2
85305-08-4
Substance obtained from burning of insulated cable and wire. Contains mainly CuO and may contain carbonaceous residues and small amounts of lead and chlorine.
Details
A substance obtained during the reaction of hydrogen sulfite in gases that are produced during the dry distillation of bituminous coal at greater than 700°C (1292°F) with a gas purification substance consisting chiefly of bag iron ore and iron oxide slurry. Composed primarily of iron ore, iron oxide slurry, sulfur and sulfur compounds.
308-754-5
98219-83-1
A substance obtained during the reaction of hydrogen sulfite in gases that are produced during the dry distillation of bituminous coal at greater than 700°C (1292°F) with a gas purification substance consisting chiefly of bag iron ore and iron oxide slurry. Composed primarily of iron ore, iron oxide slurry, sulfur and sulfur compounds.
Details
The combination of wastes formed by the coking of bituminous coal tar pitch. It consists predominantly of carbon.
295-549-8
92062-34-5
The combination of wastes formed by the coking of bituminous coal tar pitch. It consists predominantly of carbon.
Details
By-product from refined steel manufacture containing C, Cr, Fe and Ni (as Cr-Ni-grindings) and Cr2O3, FeO, MnO, NiO and SiO2 (as burned slag).
293-796-6
91082-81-4
By-product from refined steel manufacture containing C, Cr, Fe and Ni (as Cr-Ni-grindings) and Cr2O3, FeO, MnO, NiO and SiO2 (as burned slag).
Details
By-product from the pulverized chrome-charge composed of carbon, iron and silicon.
293-795-0
91082-80-3
By-product from the pulverized chrome-charge composed of carbon, iron and silicon.
Details
The residue consisting mainly of rare earth chlorides and rare earth metals.
284-897-6
84989-08-2
The residue consisting mainly of rare earth chlorides and rare earth metals.
Details
Product formed during diverse casting procedures. Consists primarily of lumps of aluminium silicate contaminated with production-specific impurities such as slags as well as oxides and metallic substances of primary production.
294-447-0
91722-48-4
Product formed during diverse casting procedures. Consists primarily of lumps of aluminium silicate contaminated with production-specific impurities such as slags as well as oxides and metallic substances of primary production.
Details
Granular substance resulting from the melting of cast iron scrap. Composed primarily of iron with varying amounts of carbon, manganese, phosphorus, silicon and sulfur.
293-800-6
91082-85-8
Granular substance resulting from the melting of cast iron scrap. Composed primarily of iron with varying amounts of carbon, manganese, phosphorus, silicon and sulfur.
Details
Carbon containing coke-like residue from carbon black manufacture. It consists primarily of carbon and may also contain sulfur and ashes.
293-794-5
91082-79-0
Carbon containing coke-like residue from carbon black manufacture. It consists primarily of carbon and may also contain sulfur and ashes.
Details
Residue obtained in the electrolysis of cadmium, composed primarily of thallium chromate. Other non-ferrous metals or metal compounds may also be present.
285-572-1
85117-20-0
Residue obtained in the electrolysis of cadmium, composed primarily of thallium chromate. Other non-ferrous metals or metal compounds may also be present.
Details
The fibrous residue obtained from the separation of wort from a mash of malted barley and wheat flour in approximately equal proportions.
307-527-8
97660-18-9
The fibrous residue obtained from the separation of wort from a mash of malted barley and wheat flour in approximately equal proportions.
Details
Brass fabrication scrap with metallic coating unuseable for melting and alloying.
279-139-6
79357-83-8
Brass fabrication scrap with metallic coating unuseable for melting and alloying.
Details
The oil obtained from the pyrolysis of automobile shredder wastes at 600°C to 800°C (1112°F to 1472°F). It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C6 through C28, substituted aromatic hydrocarbons, heteroaromatics and other organic compounds boiling in the range of approximately 50°C to 500°C (122°F to 932°F).
309-847-3
101227-24-1
The oil obtained from the pyrolysis of automobile shredder wastes at 600°C to 800°C (1112°F to 1472°F). It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C6 through C28, substituted aromatic hydrocarbons, heteroaromatics and other organic compounds boiling in the range of approximately 50°C to 500°C (122°F to 932°F).
Details
The lining of the cathodic portion of aluminum electrolysis cells consists of a carbon mass which, for the purpose of thermal isolation, is embedded in a layer of fireproof masses (SiO2 + Al2O3) in a steel vat. Flux and aluminum penetrate these masses during the furnace operation.
306-253-6
96690-57-2
The lining of the cathodic portion of aluminum electrolysis cells consists of a carbon mass which, for the purpose of thermal isolation, is embedded in a layer of fireproof masses (SiO2 + Al2O3) in a steel vat. Flux and aluminum penetrate these masses during the furnace operation.
Details
A complex combination of hydrocarbons produced by the distillation of products from the vacuum unit. It consists of saturated hydrocarbons having carbon numbers in the range of C1 through C6.
270-715-2
68477-25-8
A complex combination of hydrocarbons produced by the distillation of products from the vacuum unit. It consists of saturated hydrocarbons having carbon numbers in the range of C1 through C6.
Details
A complex combination obtained from various refinery processes. It consists of hydrocarbons having carbon numbers predominantly in the range of C1 through C5 and hydrogen sulfide.
272-337-3
68814-47-1
A complex combination obtained from various refinery processes. It consists of hydrocarbons having carbon numbers predominantly in the range of C1 through C5 and hydrogen sulfide.
Details
A complex combination obtained by the hydrogenation of petroleum products and by selective washing via chemisorption and subsequent desorption. It consists predominantly of the hydrogen sulfide, carbon dioxide and gases of unknown composition.
297-506-9
93572-76-0
A complex combination obtained by the hydrogenation of petroleum products and by selective washing via chemisorption and subsequent desorption. It consists predominantly of the hydrogen sulfide, carbon dioxide and gases of unknown composition.
Details
Waste gas from a methanol synthesis reactor containing hydrogen, carbon monoxide, methane and carbon dioxide.
293-792-4
91082-78-9
Waste gas from a methanol synthesis reactor containing hydrogen, carbon monoxide, methane and carbon dioxide.
Details
A complex combination obtained in carbon black manufacture. It consists predominantly of water and nitrogen with various small amounts of hydrogen, carbon monoxide and carbon dioxide.
271-785-7
68608-56-0
A complex combination obtained in carbon black manufacture. It consists predominantly of water and nitrogen with various small amounts of hydrogen, carbon monoxide and carbon dioxide.
Details
A complex combination obtained by the pyrolytic oxidation of methane to produce acetylene. It consists primarily of hydrogen and carbon monoxide with various small amounts of methane and ethylene.
270-714-7
68477-24-7
A complex combination obtained by the pyrolytic oxidation of methane to produce acetylene. It consists primarily of hydrogen and carbon monoxide with various small amounts of methane and ethylene.
Details
A complex combination obtained by the separation of gases in the ethylene oxide absorber-reactor system. It consists primarily of methane and ethane with small amounts of nitrogen, oxygen, carbon monoxide.
271-014-4
68513-74-6
A complex combination obtained by the separation of gases in the ethylene oxide absorber-reactor system. It consists primarily of methane and ethane with small amounts of nitrogen, oxygen, carbon monoxide.
Details
204-929-4
129-06-6
C19H16O4.Na
Details
201-377-6
81-81-2
C19H16O4
Details
442-930-3
-
WANSIM
Details
305-110-5
94334-36-8
Details
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Juglans regia, Juglandaceae.
281-688-1
84012-43-1
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Juglans regia, Juglandaceae.
Details
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Juglans nigra, Juglandaceae.
306-252-0
96690-56-1
Extractives and their physically modified derivatives such as tinctures, concretes, absolutes, essential oils, oleoresins, terpenes, terpene-free fractions, distillates, residues, etc., obtained from Juglans nigra, Juglandaceae.
Details
434-720-5
-
WALNUT ESTER
Details
418-730-7
-
WACKER SILAN SLM 53979
Details
444-190-7
-
W-1186
Details
444-260-7
-
W-1
Details
415-600-1
-
VULKANOX D-4020
Details
473-870-6
-
Details
411-610-5
-
VP-LS204
Details
243-288-5
19772-79-3
C43H50N4O6
Details
207-404-8
468-11-1
C20H26N2O2
Details

Export search results to: