Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 941-570-9 | CAS number: -
Guidance on Safe Use
Administrative data
First-aid measures
Description of first aid measures
General advice
If you feel unwell, seek medical advice (show the label where possible). Take off all contaminated clothing immediately.
If inhaled
Remove from exposure, lie down. If breathing is irregular or stopped, administer artificial respiration. Monitor breathing, give oxygen if necessary. Consult a physician.
In case of skin contact
Wash off immediately with plenty of water for at least 15 minutes. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Protect unharmed eye.
If swallowed
Consult a physician. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Most important symptoms and effects, both acute and delayed
Symptoms: No information available.
Risks: No information available.
Indication of any immediate medical attention and special treatment needed
Treatment: No information available.
Fire-fighting measures
Suitable extinguishing media
Water spray, Dry powder, Foam, Carbon dioxide (CO2)
Specific hazards during firefighting
Dangerous gases or fumes may occur in case of fire.
Special protective equipment for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
Standard procedure for chemical fires.
Accidental release measures
Personal precautions
Use personal protective equipment.
Special precautions
Forms slippery/greasy layers with water.
Environmental precautions
Should not be released into the environment.
Methods for cleaning up
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Handling and storage
Advice on safe handling
Wear personal protective equipment.
Advice on protection against fire and explosion
No special protective measures against fire required.
Requirements for storage areas and containers No special storage conditions required.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Additional transport information
Additional information
- Special provisions / remarks / other:
- Not dangerous goods
Exposure controls / personal protection
OCCUPATIONAL EXPOSURE LIMITS
No data available
PERSONAL PROTECTIVE EQUIPMENT
Respiratory protection No personal respiratory protective equipment normally required. In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where aerosols are in use, or smoke and mist occur, use self-contained breathing apparatus or breathing apparatus with a type A filter or appropriate combined filter (e.g. where aerosols are in use, or smoke and mist occur, A-P2 or ABEK-P2), in compliance with EN 141.
Hand protection The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other., Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time., Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature).
gloves suitable for permanent contact:
Material: butyl-rubber
Break through time: >= 480 min
Material thickness: >= 0.7 mm
gloves suitable for splash protection:
Material: Nitrile rubber/nitrile latex
Break through time: >= 30 min
Material thickness: >= 0.4 mm
Eye protection Tightly fitting safety goggles
Skin and body protection Protective suit
Hygiene measures Avoid contact with eyes. Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feedingstuffs. Wear suitable gloves and eye/face protection.
Protective measures Avoid contact with eyes. Wear suitable gloves and eye/face protection.
ENVIRONMENTAL EXPOSURE CONTROLS
General advice
Should not be released into the environment.
Stability and reactivity
Chemical stability
Stable under normal conditions.
Hazardous reactions
None known.
Conditions to avoid
Direct sources of heat.
Materials to avoid
Strong acids and oxidizing agents;
Hazardous decomposition products
No decomposition if stored normally.
Thermal decomposition
No decomposition if used as directed.
Disposal considerations
Waste treatment methods
Product can be incinerated, when in compliance with local regulations.
waste code of the European Union: EWC
The waste code must be determined in agreement with the regional waste disposal authority or company. A waste code in accordance with the European Waste Catalogue (EWC) may not be assigned to this product since it admits of a classification only when the consumer uses it for some purpose.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
