Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
Reaction mass of (1RS)-1-[(1RS)-3,3-dimethylcyclohexyl]ethyl [(2RS,3RS)-3-ethyloxiran-2-yl]acetate and (1RS)-1-[(1RS)-3,3-dimethylcyclohexyl]ethyl [(2SR,3SR)-3-ethyloxiran-2-yl]acetate and (1RS)-1-[(1SR)-3,3-dimethylcyclohexyl]ethyl [(2RS,3RS)-3-ethyloxiran-2-yl]acetate and (1RS)-1-[(1SR)-3,3-dimethylcyclohexyl]ethyl [(2SR,3SR)-3-ethyloxiran-2-yl]acetate
EC number: 950-412-8 | CAS number: -
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Endpoint summary
Administrative data
Key value for chemical safety assessment
Genetic toxicity in vitro
Description of key information
negative, in vitro bacterial reverse mutation (with and without S-9 activation), OECD TG 471, 2014
negative, in vitro chromosome aberration test (with and without S-9 activation), OECD TG 473, 2015
Link to relevant study records
- Endpoint:
- in vitro gene mutation study in bacteria
- Remarks:
- Type of genotoxicity: gene mutation
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 29-01-2014 to 04-03-2014
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Guideline study performed under GLP. All relevant validity criteria were met.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 471 (Bacterial Reverse Mutation Assay)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.13/14 (Mutagenicity - Reverse Mutation Test Using Bacteria)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 870.5100 - Bacterial Reverse Mutation Test (August 1998)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- JAPAN: Guidelines for Screening Mutagenicity Testing Of Chemicals
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- inspected: July 2012 ; signature: November 2012
- Type of assay:
- bacterial reverse mutation assay
- Species / strain / cell type:
- E. coli WP2 uvr A
- Additional strain / cell type characteristics:
- not applicable
- Species / strain / cell type:
- S. typhimurium TA 1535, TA 1537, TA 98 and TA 100
- Additional strain / cell type characteristics:
- not applicable
- Metabolic activation:
- with and without
- Metabolic activation system:
- Rat liver S9
- Test concentrations with justification for top dose:
- Experiment 1 (pre-incubation method): 0, 1.5, 5, 15, 50, 150, 500, 1500 and 5000 µg/plate
Experiment 2 (pre-incubation method): 0, 0.05, 0.15, 0.5, 1.5, 5, 15, 50, 150, 500 and 1500 µg/plate
Up to eight test item dose levels were selected in Experiment 2 in order to achieve both a minimum of four non-toxic doses and the toxic/guideline limit of the test item. The dose levels were selected based on the results of Experiment 1.
All Salmonella strains (without S9-mix): 0.05, 0.15, 0.5, 1.5, 5, 15, 50 500 μg/plate.
Salmonella strain TA100 and TA1537 (with S9-mix) and E.coli strain WP2uvrA (without S9-mix): 0.5, 1.5, 5, 15, 50, 150, 500 μg/plate.
Salmonella strain TA98 and TA1537 (with S9-mix): 0.15, 0.5, 1.5, 5, 15, 50, 150 μg/plate.
E.coli strain WP2uvrA (with S9-mix): 1.5, 5, 15, 50, 150, 500, 1500 μg/plate. - Vehicle / solvent:
- - Vehicle(s)/solvent(s) used: dimethyl sulphoxide (DMSO)
- Justification for choice of solvent/vehicle: The test item was immiscible in sterile distilled water at 50 mg/mL but was fully miscible in dimethyl sulphoxide at the same concentration in solubility checks performed. Dimethyl sulphoxide was selected as the vehicle.
- Other: Formulated concentrations were (if required) adjusted by an appropriate factor to allow for the stated purity of the test item. - Untreated negative controls:
- yes
- Negative solvent / vehicle controls:
- yes
- True negative controls:
- no
- Positive controls:
- yes
- Positive control substance:
- 4-nitroquinoline-N-oxide
- 9-aminoacridine
- N-ethyl-N-nitro-N-nitrosoguanidine
- benzo(a)pyrene
- other: 2-Aminoanthracene
- Details on test system and experimental conditions:
- METHOD OF APPLICATION: Experiment 1. in medium; in agar (pre-incubation) ; Experiment 2. in medium; in agar (pre-incubation)
DURATION
- Exposure duration:
Experiment 1. 0.1 mL of the appropriate bacterial strain culture, 0.5 mL of phosphate buffer (or S9-activation mix, as applicable) and 0.1 mL of the test item formulation, solvent or 0.1 mL of appropriate positive control were incubated at 37 °C± 3 °C for 20 minutes (with shaking) prior to addition of 2 mL of amino-acid supplemented media and subsequent plating onto Vogel-Bonner plates. After setting, the plates were placed in anaerobic jars or bags (one jar/bag for each concentration of test item/vehicle) during the incubation procedure. All testing for this experiment was performed in triplicate. Concurrent negative controls were dosed using the standard plate incorporation method. All of the plates were incubated at 37 °C± 3 °C for approximately 48 hours and scored for the presence of revertant colonies using an automated colony counting system. The plates were viewed microscopically for evidence of thinning (toxicity).
Experiment 2. The procedure for incubation and duration was the same as in Experiment 1.
NUMBER OF REPLICATIONS: 3
DETERMINATION OF CYTOTOXICITY
- Method: relative total growth - Rationale for test conditions:
- In accordance with the relevant guidelines.
- Evaluation criteria:
- There are several criteria for determining a positive result. Any, one, or all of the following can be used to determine the overall result of the study:
1. A dose-related increase in mutant frequency over the dose range tested (De Serres and Shelby, 1979).
2. A reproducible increase at one or more concentrations.
3. Biological relevance against in-house historical control ranges.
4. Statistical analysis of data as determined by UKEMS (Mahon et al., 1989).
5. Fold increase greater than two times the concurrent solvent control for any tester strain (especially if accompanied by an out of historical range response (Cariello and Piegorsch, 1996)).
A test item is considered non-mutagenic (negative) in the test system if the above criteria are not met.
In instances of data prohibiting definitive judgement about test item activity are reported as equivocal. - Statistics:
- Statistical methods (Mahon, et al.); as recommended by the UKEMS Subcommittee on Guidelines for Mutagenicity Testing, Report - Part III (1989).
- Species / strain:
- E. coli WP2 uvr A
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- cytotoxicity
- Remarks:
- See table 1 and 2
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- valid
- Positive controls validity:
- valid
- Species / strain:
- S. typhimurium TA 1535, TA 1537, TA 98 and TA 100
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- cytotoxicity
- Remarks:
- See table 1 and 2
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- valid
- Positive controls validity:
- valid
- Remarks on result:
- other: all strains/cell types tested
- Conclusions:
- Interpretation of results:
Negative
Under the conditions of this study the test item was considered to be non-mutagenic in the presence and absence of S9 activation. - Executive summary:
The study was performed to the requirements of OECD Guideline 471, EU Method B13/14, US EPA OCSPP 870.5100 and Japanese guidelines for bacterial mutagenicity testing under GLP, to evaluate the potential mutagenicity of the test item in a bacterial reverse mutation assay using S.typhimurium strains TA98, TA100, TA1535, TA1537 and E.coli strain WP2uvrA- in both the presence and absence of S-9 mix. The test strains were treated with the test item using the Ames pre incubation method at up to eight dose levels, in triplicate, both with and without the addition of a rat liver homogenate metabolizing system (10% liver S9 in standard co-factors). Formulated concentrations were adjusted by an appropriate factor to allow for the stated purity of the test item.The dose range for Experiment 1 was predetermined and was 1.5 to 5000 µg/plate. However, due to excessive toxicity, a repeat experiment had to be performed (Salmonella strains dosed in the absence of S9-mix only) employing a dose range of 0.015 to 50 μg/plate. The second experiment was repeated on a separate day using fresh cultures of the bacterial strains and fresh test item formulations. The experiment was repeated on a separate day using fresh cultures of the bacterial strains and fresh test item formulations. Seven test item dose levels were selected in Experiment 2 in order to achieve both a minimum of four non-toxic dose levels and the toxic limit of the test item. The dose range was amended following the results of Experiment 1 and ranged between 0.05 and 1500 µg/plate, depending on bacterial strain type and presence or absence of S9-mix. The vehicle (dimethyl sulphoxide) control plates gave counts of revertant colonies within the normal range. All of the positive control chemicals used in the test induced marked increases in the frequency of revertant colonies, both with or without metabolic activation. Thus, the sensitivity of the assay and the efficacy of the S9-mix were validated. The maximum dose level of the test item in the first experiment was selected as the maximum recommended dose level of 5000 μg/plate. However the Salmonella strains dosed in the absence of S9-mix had to be repeated and were tested up the toxic limit (i.e. 50 μg/plate based on the first experiment). In the first mutation test, the test item induced a visible reduction in the growth of the bacterial background lawns of all the tester strains in both the presence and absence of S9-mix. Consequently, for the second mutation test the toxic limit was employed as the maximum dose concentration. Results from the second mutation test (pre-incubation method) confirmed the toxicity previously noted with weakened bacterial background lawns observed. The sensitivity of the bacterial tester strains to the toxicity of the test item varied slightly between strain type, exposures with or without S9 mix. No test item precipitate was observed on the plates at any of the doses tested in either the presence or absence of S9-mix. There were no significant increases in the frequency of revertant colonies recorded for any of the bacterial strains, with any dose of the test item, either with or without metabolic activation (S9 mix). It was concluded that, under the conditions of this assay, the test item gave a negative, i.e. non-mutagenic response in S.typhimurium strains TA98, TA100, TA1535, TA1537 and E.coli strain WP2uvrA- in the presence and absence of S-9 mix.
- Endpoint:
- in vitro cytogenicity / chromosome aberration study in mammalian cells
- Remarks:
- Type of genotoxicity: chromosome aberration
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 27-01-2014 to 28-05-2014
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Guideline study performed under GLP. All relevant validity criteria were met.
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 473 (In Vitro Mammalian Chromosome Aberration Test)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- JAPAN: Guidelines for Screening Mutagenicity Testing Of Chemicals
- Version / remarks:
- : Japanese Ministry of Health, Labour and Welfare (MHLW), Ministry of Economy, Trade and Industry (METI), and Ministry of the Environmental (MOE) Guidelines of 31 March 2011
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.10 (Mutagenicity - In Vitro Mammalian Chromosome Aberration Test)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EPA OPPTS 870.5375 - In vitro Mammalian Chromosome Aberration Test
- Deviations:
- no
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- other: 40 CFR 799.9537 TSCA in vitro mammalian chromosome aberration test.
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- inspected: March 2014; signature: May 2014
- Type of assay:
- in vitro mammalian chromosome aberration test
- Target gene:
- not applicable (chromosome aberration test)
- Species / strain / cell type:
- lymphocytes: Human lymphocytes
- Details on mammalian cell type (if applicable):
- For each experiment, sufficient whole blood was drawn from the peripheral circulation of a non smoking volunteer (typically aged 18-35) who had been previously screened for suitability. The volunteer had not knowingly been exposed to high levels of radiation or hazardous chemicals and had not knowingly recently suffered from a viral infection. Cell cycle times for lymphocytes using BrdU (bromodeoxyuridine) incorporation to assess the number of first, second and third division metaphase cells to calculate the average generation time (AGT) for human lymphocytes which is considered to be approximately 16 hours. Therefore using this average the in-house exposure time for the experiments for 1.5 x AGT is 24 hours. Further details on the donors is available in the full study report.
- Additional strain / cell type characteristics:
- not specified
- Metabolic activation:
- with and without
- Metabolic activation system:
- S9 Microsomal fraction: Lot Nos. PB/βNF S9 20/10/13 and 15/12/13
- Test concentrations with justification for top dose:
- The maximum dose level was 2684 µg/mL, or 10 mM concentration, the maximum recommended dose level. The test item was insoluble in culture medium (MEM) at 26.84 mg/mL but was soluble in dimethyl sulphoxide (DMSO) at 268.4 mg/mL in solubility checks. There was no significant change in pH when the test item was dosed into media and the osmolality did not increase by more than 50 mOsm (Scott et al., 1991) within the 0 to 2684 μg/mL range (full results recorded in the full study report).
The purity of the test item was accounted for in the test item formulations, if required (see 'confidential details on test material').
I. Preliminary toxicity test: 0 (control), 10.48, 20.97, 41.94, 83.88, 167.75, 335.5, 671, 1342 and 2684 μg/mL
Within three exposure groups:
i) 4-hours exposure to the test item without S9-mix, followed by a 20-hour recovery period in treatment-free media, 4(20)-hour exposure.
ii) 4-hours exposure to the test item with S9-mix (2%), followed by a 20-hour recovery period in treatment-free media, 4(20)-hour exposure.
iii) 24-hour continuous exposure to the test item without S9-mix.
II. Main Test:
4(20)-hour without S9-mix 0*, 10, 20, 30*, 40*, 60*, 80*, MMC 0.4* μg/mL
4(20)-hour with S9 (2%) 0*, 10, 20, 40, 50*, 100*, 120*, 180*, CP 5* μg/mL
24-hour without S9-mix 0*, 10, 20*, 30*, 40*, 60*, 80, MMC 0.2* μg/mL
4(20)-hour with S9 (1%) 0*, 10, 20, 40, 50*, 100*, 120*, 180*, CP 5* μg/mL
where:
* = dose levels selected for metaphase analysis
MMC= Mitomycin C
CP = Cyclophosphamide - Vehicle / solvent:
- - Vehicle(s)/solvent(s) used: DMSO
- Justification for choice of solvent/vehicle: The test item was insoluble in culture medium (MEM) at 26.84 mg/mL but was soluble in dimethyl sulphoxide (DMSO) at 268.4 mg/mL in solubility checks. There was no significant change in pH when the test item was dosed into media and the osmolality did not increase by more than 50 mOsm (Scott et al., 1991) within the 0 to 2684 μg/mL range (full results recorded in the full study report). The test item was formulated within two hours of it being applied to the test system. - Untreated negative controls:
- other: Vehicle control served as the negative control
- Negative solvent / vehicle controls:
- yes
- Remarks:
- DMSO
- True negative controls:
- not specified
- Positive controls:
- yes
- Positive control substance:
- cyclophosphamide
- mitomycin C
- Remarks:
- Full details on the positive controls is reported in the full study report.
- Details on test system and experimental conditions:
- METHOD OF APPLICATION: Other:
Duplicate lymphocyte cultures (A and B) were established for each dose level by mixing the following components, giving, when dispensed into sterile plastic flasks for each culture: 9.05 mL MEM, 10% (FBS); 0.1 mL Li-heparin; 0.1 mL phytohaemagglutinin; 0.75 mL heparinized whole blood
DURATION
- Preincubation period: Not reported.
- Exposure duration:
The preliminary toxicity test was performed using both of the exposure conditions as described for both experiments (below).
I. With Metabolic Activation (S9) Treatment:
- After approximately 48 hours incubation at approximately 37 ºC, 5% CO2 in humidified air, the cultures were transferred to tubes and centrifuged. Approximately 9 mL of the culture medium was removed, reserved, and replaced with the required volume of MEM (including serum) and 0.1 mL (100 μL) of the appropriate solution of vehicle control or test item was added to each culture. For the positive control, 0.1 mL of the appropriate solution was added to the cultures. 1mL of 20% S9-mix (i.e. 2% or 1%, as applicable final concentration of S9 in standard co-factors) was added to the cultures of the Preliminary Toxicity Test and of the Main Experiment. After 4 hours at approximately 37 ºC, 5 % CO2 in humidified air the cultures were centrifuged, the treatment medium removed by suction and replaced with an 8 mL wash of MEM culture medium. After a further centrifugation the wash medium was removed by suction and replaced with the original culture medium. The cells were then re-incubated for a further 20 hours at approximately 37 ºC in 5 % CO2 in humidified air.
II. Without Metabolic Activation (S9) Treatment:
- After approximately 48 hours incubation at approximately 37 ºC with 5% CO2 in humidified air the cultures were decanted into tubes and centrifuged. Approximately 9 mL of the culture medium was removed and reserved. The cells were then resuspended in the required volume of fresh MEM (including serum) and dosed with 0.1 mL (100 μL) of the appropriate vehicle control, test item solution or 0.1 mL of positive control solution. The total volume for each culture was a nominal 10 mL. After 4 hours at approximately 37 ºC, 5% CO2 in humidified air, the cultures were centrifuged the treatment medium was removed by suction and replaced with an 8 mL wash of MEM culture medium. After a further centrifugation the wash medium was removed by suction and replaced with the reserved original culture medium. The cells were then returned to the incubator for a further 20 hours at approximately 37 ºC in 5 % CO2 in humidified air.
In the 24-hour exposure in the absence of S9, the exposure was continuous. Therefore, when the cultures were established the culture volume was a nominal 9.9 mL. After approximately 48 hours incubation the cultures were removed from the incubator and dosed with 0.1 mL of vehicle control, test item dose solution or 0.1 mL of positive control solution. The nominal final volume of each culture was 10 mL. The cultures were then incubated at approximately 37 ºC, 5% CO2 in humidified air for 24 hours.
NUMBER OF REPLICATIONS: The study conducted two replicates (A and B) at each dose level and exposure duration groups.
NUMBER OF CELLS EVALUATED: A total of 2000 lymphocyte cell nuclei were counted and the number of cells in metaphase recorded and expressed as the mitotic index and as a percentage of the vehicle control value.
DETERMINATION OF CYTOTOXICITY
- Method: mitotic index
The slides were checked microscopically to determine the quality of the metaphases and also the toxicity and extent of precipitation, if any, of the test item. These observations were used to select the dose levels for mitotic index evaluation.
OTHER EXAMINATIONS:
- Determination of polyploidy: Yes. Cells with 69 chromosomes or more were scored as polyploid cells and the incidence of polyploid cells (%) including endoreduplicated cells, reported. Many experiments with human lymphocytes have established a range of aberration frequencies acceptable for control cultures in normal volunteer donors. The current historical range was reported in the full study report.
- Other: Scoring: Where possible, 200 consecutive well-spread metaphases from each concentration (100 per duplicate) were assessed for observations, if the cell had 44 to 48 chromosomes, any breaks, fragments, deletions, exchanges and chromosomal disintegrations were recorded as structural chromosome aberrations according to the simplified system of Savage (1976), ISCN (1985). Where the analysis of the slide resulted in a large frequency of aberrant cells (30 to 50%) then the analysis was terminated after a total of 50 metaphases with aberrations were recorded. Cells with chromosome aberrations were reviewed as necessary by a senior cytogeneticist prior to decoding the slides. - Evaluation criteria:
- Positive response criteria
A test item can be classified as genotoxic if:
1) The number of cells with structural chromosome aberrations is outside the range of the laboratory historical control data.
2) At least one concentration exhibits a statistically significant increase in the number of cells with structural chromosome aberrations compared to the concurrent negative control and the observed increase in the frequency of cells with structural aberrations is considered to be dose-related. Marked increases observed in only one dose level are assessed case by case.
Negative response criteria
A test item can be classified as non-genotoxic if:
1) The number of cells with structural aberrations in all evaluated dose groups should be within the range of the laboratory historical control data.
2) No toxicologically or statistically significant increase of the number of cells with structural chromosome aberrations is observed following statistical analysis.
In case the response is neither clearly negative nor clearly positive as described above or in order to assist in establishing the biological relevance of a result, the data should be evaluated by expert judgment.
Statistical analysis is also performed (see: ‘Statistics’). Biological relevance of the results are to be considered first. Statistical methods are used to analyze the increases in aberration data as recommended in the OECD 473 guideline. However, statistical significance will not be the only determining factor for a positive response. A toxicologically significant response is recorded when the p value calculated from the statistical analysis of the frequency of cells with aberrations excluding gaps is less than 0.05 when compared to its concurrent control and there is a dose-related increase in the frequency of cells with aberrations which is reproducible. Incidences where marked statistically significant increases are observed only with gap-type aberrations will be assessed on a case by case basis. - Statistics:
- The frequency of cells with aberrations excluding gaps and the frequency of polyploid cells was compared, where necessary, with the concurrent vehicle control value using Fisher's Exact test. (Richardson et al. Analysis of data from in vitro cytogenetic assays. In Statistical Evaluation of mutagenicity test data: UKEMS sub-committee on guidelines for mutagenicity testing. Report Part III (Ed: Kirkland, D.J.), Cambridge University Press (1989)
- Species / strain:
- lymphocytes: Human lymphocytes
- Metabolic activation:
- with and without
- Genotoxicity:
- negative
- Cytotoxicity / choice of top concentrations:
- cytotoxicity
- Vehicle controls validity:
- valid
- Untreated negative controls validity:
- not applicable
- Positive controls validity:
- valid
- Additional information on results:
- TEST-SPECIFIC CONFOUNDING FACTORS
- Effects of pH: There was no significant change in pH when the test item was dosed into media
- Effects of osmolality: There was no significant change osmolality (did not increase by more than 50 mOsm) when the test item was dosed into media
- Evaporation from medium: Not reported.
- Water solubility: Not applicable.
- Precipitation: In the preliminary test: Cloudy precipitate of the test item was observed in the parallel blood-free cultures at the end of the exposure, at and above 335.5 μg/mL, in the 4(20)-hour exposure groups and at and above 671 μg/mL in the continuous exposure group. Greasy/oily precipitate of the test item was also observed in the parallel blood-free cultures at the end of the exposure, at and above 83.88 μg/mL, in the 4(20)-hour exposure group in the absence of S9-mix and continuous exposure group. In the 4(20)-hour exposure group in the presence of S9-mix greasy/oily precipitate was observed at and above 1342 μg/mL.
Main test: No precipitate was observed at the end of exposure, in any of the four exposure groups.
- Other confounding effects: In the preliminary test and the main test: Haemolysis was observed following exposure to the test item at harvesting at and above 41.94 μg/mL in the 4(20)-hour exposure group in the absence of S9-mix, and at and above 167.75 μg/mL in the 24-hour continuous exposure group, reduced haemolysis was observed in both these exposure groups at 2684 μg/mL. In the 4(20)-hour exposure group in the presence of S9-mix haemolysis was observed from 167.75 μg/mL to 1342 μg/mL, it was not observed at the top dose of 2684 μg/mL. Haemolysis is an indication of a toxic response to the erythrocytes and not indicative of any genotoxic response to the lymphocytes.
Main test: Haemolysis was observed following exposure to the test item at and above 10 μg/mL in the 4(20)-hour exposure group in the absence of S9-mix, and at and above 40 μg/mL in the 4(20)-hour exposure group in the presence of S9-mix (2%). Haemolysis was observed following exposure to the test item at and above 60 μg/mL in the 24 hour continuous exposure group and at and above 100 μg/mL in the 4(20)-hour exposure group in the presence of S9-mix (1%).
RANGE-FINDING/SCREENING STUDIES: The dose range for the Preliminary Toxicity Test was 0 to 2684 μg/mL. The maximum dose was the maximum recommended dose level. The selection of the maximum dose level was based on toxicity for the main test.
COMPARISON WITH HISTORICAL CONTROL DATA:
- All vehicle (DMSO) controls had frequencies of cells with aberrations within the range expected for normal human lymphocytes. (Within the Historic Control Data range presented in the full study report).
- All the positive control items induced statistically significant increases in the frequency of cells with aberrations. (Within the Historic Control Data range presented in the full study report).
ADDITIONAL INFORMATION ON CYTOTOXICITY: See ‘other confounding effects’ listed above. - Remarks on result:
- other: all strains/cell types tested
- Conclusions:
- Interpretation of results:
Negative
Under the conditions of this study, the test item was considered to be non-clastogenic to human lymphocytes in vitro. - Executive summary:
The study was performed to the requirements of OECD TG 473, EU Method B.10, and Japan METI guidelines under GLP conditions to assess the potential chromosomal mutagenicity of the test item, on the metaphase chromosomes of normal human lymphocyte cultured mammalian cells. Duplicate cultures of human lymphocytes, treated with the test item, were evaluated for chromosome aberrations at four dose levels, together with vehicle and positive controls. In this study, four exposure conditions were investigated; in experiment 1: 4 hours exposure in the presence of an induced rat liver homogenate metabolizing system (S9), at a 2% final concentration with cell harvest after a 20-hour expression period, 4 hours exposure in the absence of metabolic activation (S9) with a 20-hour expression period. In experiment 2: 4 hours exposure in the presence of an induced rat liver homogenate metabolizing system (S9), at a 1% final concentration with cell harvest after a 20-hour expression period and a 24-hour exposure in the absence of metabolic activation. The dose levels used in the Main Experiment were selected using data from the Cell Growth Inhibition Test (Preliminary Toxicity Test) where the results indicated that the maximum concentration should be limited on precipitate and cytotoxicity. The dose levels selected for the Main Test were as follows: 4(20)-hour with S9-Mix (2%): 0, 10, 20, 30, 40, 60, 80 μg/mL, 4(20)-hour without S9 Mix: 0, 10, 20, 40, 50, 100, 120, 180 μg/mL, 4(20)-hour with S9-Mix (1%): 0, 10, 20, 40, 50, 100, 120, 180 μg/mL and 24-hour without S9: 0, 10, 20, 30, 40, 60, 80 μg/mL, respectively. All vehicle (DMSO) controls had frequencies of cells with aberrations within the range expected for normal human lymphocytes. All the positive control items induced statistically significant increases in the frequency of cells with aberrations indicating that the sensitivity of the assay and the efficacy of the S9 mix were validated. The test item did not induce any statistically significant increases in the frequency of cells with aberrations in the 4(20)-hour exposure groups in the absence and presence of S9, or the 4(20)-hour exposure group in the absence of S9 at dose levels that achieved near optimum toxicity (approximately 50% mitotic inhibition). Under the conditions of this study, the test item was considered to be non-clastogenic to human lymphocytes in vitro.
Referenceopen allclose all
Note: The experimental procedure for Experiment 1 tested up to 5000 µg/plate was repeated with limited dose range due to excessive toxicity in the original test. The data for the Salmonella strains given in Experiment 1, refer to the repeat experiment only. Original Experiment 1 data for the Salmonella strains was discarded as there were less than four non-toxic doses.
Table 1 : Test Results: Experiment 1 with and without metabolic activation and results of concurrent positive controls
S9-Mix (-) |
Dose Level Per Plate |
Number of revertants (mean) +/- SD |
||||
Base-pair substitution strains |
Frameshift strains |
|||||
TA100 |
TA1535 |
WP2uvrA |
TA98 |
TA1537 |
||
Solvent Control (DMSO) |
78 (75) 82 8.9# 65 |
15 (13) 73 4.9 16 |
25 (21) 17 4.0 20 |
9 (16) 20 6.4 20 |
20 (19) 24 5.6 13 |
|
0.015 µg |
53 (65) 79 13.1 64 |
8 (12) 12 2.1 11 |
N/T |
20 (23) 25 2.5 23 |
13 (14) 17 3.1 11 |
|
0.05 µg |
56 (66) 71 9.0 72 |
11 (11) 12 1.5 9 |
N/T |
23 (15) 11 6.9 11 |
9 (18) 25 8.2 20 |
|
0.15 µg |
83 (82) 82 1.5 80 |
1 (7) 9 5.3 11 |
N/T |
25 (18) 16 6.2 13 |
21 (15) 9 6.0 15 |
|
0.5 µg |
69 (66) 63 3.1 67 |
3 (8) 5 6.4 15 |
N/T |
20 (19) 17 1.5 19 |
15 (15) 17 2.5 12 |
|
1.5 µg |
74 (89) 100 13.3 92 |
11 (12) 12 1.0 13 |
23 (19) 12 6.4 23 |
16 (17) 13 4.0 21 |
11 (16) 15 6.1 23 |
|
5 µg |
61 (63) 75 11.6 52 |
8 (8) 8 0.6 9 |
23 (16) 16 7.5 8 |
24 (25) 27 2.1 23 |
12 (15) 19 3.5 15 |
|
15 µg |
45 S (54) 57 S 7.9 60 S |
12 S (9) 3 S 4.9 11 S |
12 (15) 15 2.5 17 |
20 S (18) 13 S 4.4 21 S |
3 S (3) 0 S 3.5 7 S |
|
50 µg |
79 S (72) 88 S 21.0 48 S |
11 S (12) 13 S 1.0 12 S |
24 (15) 16 9.5 5 |
19 S (13) 12 S 5.1 9 S |
3 S (6) 9 S 3.1 5 S |
|
150 µg |
N/T |
N/T |
11 (15) 20 4.5 15 |
N/T |
N/T |
|
500 µg |
N/T |
N/T |
23 S (24) 31 S 7.0 17 S |
N/T |
N/T |
|
1500 µg |
N/T |
N/T |
15 S (17) 24 S 6.2 12 S |
N/T |
N/T |
|
5000 µg |
N/T |
N/T |
12 S (15) 13 S 4.4 20 S |
N/T |
N/T |
|
Positive controls S9-Mix (-) |
Name Dose Level No. of Revertants |
ENNG |
ENNG |
ENNG |
4NQO |
9AA |
3 µg |
5 µg |
2 µg |
0.2 µg |
80 µg |
||
788 (842) 913 64.2 825 |
1576 (1649) 1613 96.8 1759 |
520 (388) 414 146.2 231 |
128 (143) 154 13.5 147 |
3702 (3014) 2663 595.6 2678 |
||
|
||||||
S9-Mix (+) |
Dose Level Per Plate |
Number of revertants (mean) +/- SD |
||||
Base-pair substitution strains |
Frameshift strains |
|||||
TA100 |
TA1535 |
WP2uvrA |
TA98 |
TA1537 |
||
Solvent Control (DMSO) |
75 (83) 94 10.0# 79 |
11 (15) 25 8.7 9 |
32 (35) 36 2.6 37 |
13 (23) 28 8.7 28 |
5 (8) 11 3.0 8 |
|
1.5 µg |
76 (69) 68 6.1 64 |
23 (15) 12 7.4 9 |
19 (25) 23 6.7 32 |
24 (24) 23 0.6 24 |
15 (12) 9 3.1 11 |
|
5 µg |
63 (77) 68 19.5 99 |
12 (13) 8 5.6 19 |
27 (27) 35 8.0 19 |
19 (19) 19 0.6 20 |
9 (10) 13 2.6 8 |
|
15 µg |
87 (84) 95 13.3 69 |
11 (10) 9 1.2 11 |
21 (25) 36 10.0 17 |
24 (22) 27 5.7 16 |
5 (9) 12 3.5 9 |
|
50 µg |
75 (86) 96 10.5 87 |
8 (9) 11 1.5 9 |
24 (23) 21 1.5 23 |
23 (21) 21 2.0 19 |
5 (7) 11 3.5 5 |
|
150 µg |
80 (77) 67 8.5 83 |
15 S (10) 8 S 4.0 8 S |
25 (22) 21 2.6 20 |
24 S (25) 25 S 1.5 27 S |
9 (9) 11 2.0 7 |
|
500 µg |
82 S (79) 102 S 24.6 53 S |
9 S (8) 7 S 1.2 9 S |
17 (19) 12 8.2 28 |
17 S (19) 19 S 1.5 20 S |
5 S (8) 13 S 4.6 5 S |
|
1500 µg |
68 V (65) 68 V 5.2 59 V |
4 V (7) 9 V 2.6 8 V |
20 S (21) 20 S 1.7 23 S |
15 S (18) 21 S 3.1 17 S |
7 S (5) 1 S 3.8 8 S |
|
5000 µg |
74 V (73) 74 V 1.2 72 V |
1 V (3) 5 V 2.0 3 V |
24 S (20) 20 S 4.5 15 S |
13 S (9) 8 S 3.2 7 S |
7 S (5) 4 S 1.7 4 S |
|
Positive controls S9-Mix (+) |
Name Dose Level No. of Revertants |
2AA |
2AA |
2AA |
BP |
2AA |
1 µg |
2 µg |
10 µg |
5 µg |
2 µg |
||
548 (588) 547 69.6 668 |
155 (138) 124 15.7 135 |
182 (153) 140 25.5 136 |
122 (117) 127 13.2 102 |
132 (134) 120 15.6 151 |
Table 2 : Test Results: Experiment 2 with and without metabolic activation and results of concurrent positive controls
S9-Mix (-) |
Dose Level Per Plate |
Number of revertants (mean) +/- SD |
||||
Base-pair substitution strains |
Frameshift strains |
|||||
TA100 |
TA1535 |
WP2uvrA |
TA98 |
TA1537 |
||
Solvent Control (DMSO) |
68 (77) 87 9.6# 75 |
15 (17) 19 2.0 17 |
25 (20) 11 7.8 24 |
8 (16) 19 6.7 20 |
12 (13) 17 4.0 9 |
|
0.05 µg |
72 (81) 84 7.6 86 |
12 (10) 9 1.7 9 |
N/T |
25 (18) 17 6.6 12 |
8 (10) 15 4.0 8 |
|
0.15 µg |
87 (81) 72 7.8 83 |
9 (9) 9 0.6 8 |
N/T |
17 (15) 15 2.5 12 |
12 (11) 5 5.6 16 |
|
0.5 µg |
72 (69) 61 7.4 75 |
9 (8) 8 0.6 8 |
15 (18) 19 2.6 20 |
13 (13) 11 2.0 15 |
13 (8) 3 5.0 7 |
|
1.5 µg |
72 (67) 61 5.7 69 |
13 (12) 13 1.2 11 |
12 (12) 16 3.5 9 |
19 (17) 17 2.0 15 |
7 (10) 7 5.8 17 |
|
5 µg |
60 (64) 69 4.5 64 |
11 (10) 11 1.2 9 |
15 (16) 15 1.2 17 |
12 (14) 15 1.7 15 |
5 (8) 9 2.3 9 |
|
15 µg |
60 S (69) 71 S 7.8 75 S |
7 S (9) 13 S 3.5 7 S |
16 (16) 9 7.5 24 |
20 (17) 21 5.5 11 |
11 S (9) 11 S 3.5 5 S |
|
50 µg |
74 S (66) 61 S 7.0 63 S |
7 S (6) 5 S 1.2 7 S |
21 (15) 12 4.9 13 |
11 S (9) 8 S 1.7 8 S |
1 S (3) 4 S 2.1 5 S |
|
150 µg |
N/T |
N/T |
25 (19) 17 5.3 15 |
N/T |
N/T |
|
500 µg |
N/T |
N/T |
15 S (14) 17 S 3.1 11 S |
N/T |
N/T |
|
Positive controls S9-Mix (-) |
Name Dose Level No. of Revertants |
ENNG |
ENNG |
ENNG |
4NQO |
9AA |
3 µg |
5 µg |
2 µg |
0.2 µg |
80 µg |
||
746 (802) 859 56.5 802 |
450 (435) 370 59.4 486 |
1056 (913) 877 128.4 807 |
202 (189) 162 23.1 202 |
568 (559) 492 62.5 616 |
||
|
||||||
S9-Mix (+) |
Dose Level Per Plate |
Number of revertants (mean) +/- SD |
||||
Base-pair substitution strains |
Frameshift strains |
|||||
TA100 |
TA1535 |
WP2uvrA |
TA98 |
TA1537 |
||
Solvent Control (DMSO) |
72 (71) 74 3.1# 68 |
23 (19) 15 4.0 19 |
24 (26) 27 1.7 27 |
29 (23) 19 5.5 20 |
12 (12) 12 0.0 12 |
|
0.15 µg |
N/T |
13 (12) 13 1.2 11 |
N/T |
16 (19) 20 2.3 20 |
N/T |
|
0.5 µg |
83 (80) 80 3.5 76 |
19 (17) 19 4.0 12 |
N/T |
28 (25) 24 2.3 24 |
4 (7) 5 4.4 12 |
|
1.5 µg |
64 (64) 67 3.0 61 |
16 (15) 16 1.7 13 |
25 (27) 24 3.8 31 |
16 (17) 17 0.6 17 |
9 (8) 9 1.2 7 |
|
5 µg |
67 (75) 84 8.5 74 |
8 (15) 24 8.2 13 |
16 (23) 28 6.2 25 |
21 (23) 27 3.8 20 |
13 (11) 12 2.1 9 |
|
15 µg |
67 (70) 72 2.9 72 |
15 (16) 16 0.6 16 |
29 (28) 23 5.0 33 |
20 (21) 25 3.2 19 |
5 (11) 7 8.1 20 |
|
50 µg |
75 (79) 83 4.0 78 |
24 (17) 15 6.2 12 |
23 (25) 24 2.6 28 |
12 (17) 17 4.5 21 |
3 (9) 8 6.6 16 |
|
150 µg |
78 (78) 90 12.5 65 |
20 S (14) 11 S 4.9 12 S |
17 (17) 15 2.5 20 |
21 S (24) 29 S 4.6 21 S |
5 (10) 7 6.4 17 |
|
500 µg |
59 S (52) 48 S 6.4 48 S |
N/T |
27 (18) 13 8.1 13 |
N/T |
9 S (5) 3 S 3.2 4 S |
|
1500 µg |
N/T |
N/T |
16 S (15) 13 S 1.5 15 S |
N/T |
N/T |
|
Positive controls S9-Mix (+) |
Name Dose Level No. of Revertants |
2AA |
2AA |
2AA |
BP |
2AA |
1 µg |
2 µg |
10 µg |
5 µg |
2 µg |
||
746 (802) 859 56.5 802 |
450 (435) 370 59.4 486 |
1056 (913) 877 128.4 807 |
202 (189) 162 23.1 202 |
568 (559) 492 62.5 616 |
ENNG: N-ethyl-N'-nitro-N-nitrosoguanidine
4NQO: 4-Nitroquinoline-1-oxide
9AA: 9-Aminoacridine
BP: Benzo(a)pyrene
2AA: 2-Aminoanthracene
N/T: Not tested at this dose level
S: Sparse bacterial background lawn
T: Toxic, no bacterial background lawn
V: Very weak bacterial background lawn
#: Standard deviation
Chromosome Aberration Test – Main Test
4(20)-hour without S9: 0*, 4.06, 8.13, 16.25*, 32.5*, 48.75*, 65, MMC 0.4*
4(20)-hour with S9: 0*, 8.13, 16.25, 32.5, 43.5*, 54*, 65*, 130, CP 5*
24-hour without S9: 0*, 4.06, 8.13, 16.25, 32.5, 43.5*, 54*, 65*, MMC 0.2*
where: * = dose levels selected for metaphase analysis ; MMC= Mitomycin C and CP = Cyclophosphamide
The qualitative assessment of the slides determined that the toxicity was similar to that observed in the Cell Growth Inhibition Test and that there were metaphases suitable for scoring at 65 μg/mL in both the 4(20)-hour exposure groups in the absence and presence of metabolic activation (S9-mix) and also in the 24-hour continuous exposure group in the absence of metabolic activation (S9-mix). No precipitate was observed at the end of exposure, in any of the three exposure groups.
The mitotic index data confirm a dose-related inhibition of mitotic index:
4(20)-hour without S9: 49% and 38% mitotic inhibition was achieved at 48.75 μg/mL and 65 μg/mL respectively in the absence of S9-mix. Even though the mitotic index at 65 μg/mL was 38% this slightly exceeded the optimum toxicity and the metaphases were overall very poor and was therefore not selected for scoring.
4(20)-hour with S9: A dose-related inhibition of mitotic index was observed and was 42% at 65 μg/mL.
24-hour without S9: A dose-related inhibition of mitotic index was observed and was 45% at 65 μg/mL.
- All of the vehicle control cultures had frequencies of cells with chromosome aberrations within the expected range.
- The positive control items induced statistically significant increases in the frequency of cells with aberrations indicating that the sensitivity of the assay and the efficacy of the S9-mix were validated.
- The test item did not induce any statistically significant increases in the frequency of cells with aberrations either in the absence or presence of metabolic activation.
- The test item did not induce any statistically significant increase in the numbers of polyploid cells or endoreduplicated chromosomes in any of the three exposure groups.
Endpoint conclusion
- Endpoint conclusion:
- no adverse effect observed (negative)
Genetic toxicity in vivo
Endpoint conclusion
- Endpoint conclusion:
- no study available
Additional information
Key Study : OECD TG 471, 2014 : The study was performed to the requirements of OECD Guideline 471, EU Method B13/14, US EPA OCSPP 870.5100 and Japanese guidelines for bacterial mutagenicity testing under GLP, to evaluate the potential mutagenicity of the test item in a bacterial reverse mutation assay using S.typhimurium strains TA98, TA100, TA1535, TA1537 and E.coli strain WP2uvrA- in both the presence and absence of S-9 mix. The test strains were treated with the test item using the Ames pre incubation method at up to eight dose levels, in triplicate, both with and without the addition of a rat liver homogenate metabolizing system (10% liver S9 in standard co-factors). Formulated concentrations were adjusted by an appropriate factor to allow for the stated purity of the test item.The dose range for Experiment 1 was predetermined and was 1.5 to 5000 µg/plate. However, due to excessive toxicity, a repeat experiment had to be performed (Salmonella strains dosed in the absence of S9-mix only) employing a dose range of 0.015 to 50 μg/plate. The second experiment was repeated on a separate day using fresh cultures of the bacterial strains and fresh test item formulations. The experiment was repeated on a separate day using fresh cultures of the bacterial strains and fresh test item formulations. Seven test item dose levels were selected in Experiment 2 in order to achieve both a minimum of four non-toxic dose levels and the toxic limit of the test item. The dose range was amended following the results of Experiment 1 and ranged between 0.05 and 1500 µg/plate, depending on bacterial strain type and presence or absence of S9-mix. The vehicle (dimethyl sulphoxide) control plates gave counts of revertant colonies within the normal range. All of the positive control chemicals used in the test induced marked increases in the frequency of revertant colonies, both with or without metabolic activation. Thus, the sensitivity of the assay and the efficacy of the S9-mix were validated. The maximum dose level of the test item in the first experiment was selected as the maximum recommended dose level of 5000 μg/plate. However the Salmonella strains dosed in the absence of S9-mix had to be repeated and were tested up the toxic limit (i.e. 50 μg/plate based on the first experiment). In the first mutation test, the test item induced a visible reduction in the growth of the bacterial background lawns of all the tester strains in both the presence and absence of S9-mix. Consequently, for the second mutation test the toxic limit was employed as the maximum dose concentration. Results from the second mutation test (pre-incubation method) confirmed the toxicity previously noted with weakened bacterial background lawns observed. The sensitivity of the bacterial tester strains to the toxicity of the test item varied slightly between strain type, exposures with or without S9 mix. No test item precipitate was observed on the plates at any of the doses tested in either the presence or absence of S9-mix. There were no significant increases in the frequency of revertant colonies recorded for any of the bacterial strains, with any dose of the test item, either with or without metabolic activation (S9 mix). It was concluded that, under the conditions of this assay, the test item gave a negative, i.e. non-mutagenic response in S.typhimurium strains TA98, TA100, TA1535, TA1537 and E.coli strain WP2uvrA- in the presence and absence of S-9 mix.
Key Study : OECD TG 473, 2015 : The study was performed to the requirements of OECD TG 473, EU Method B.10, and Japan METI guidelines under GLP conditions to assess the potential chromosomal mutagenicity of the test item, on the metaphase chromosomes of normal human lymphocyte cultured mammalian cells. Duplicate cultures of human lymphocytes, treated with the test item, were evaluated for chromosome aberrations at four dose levels, together with vehicle and positive controls. In this study, four exposure conditions were investigated; in experiment 1: 4 hours exposure in the presence of an induced rat liver homogenate metabolizing system (S9), at a 2% final concentration with cell harvest after a 20-hour expression period, 4 hours exposure in the absence of metabolic activation (S9) with a 20-hour expression period. In experiment 2: 4 hours exposure in the presence of an induced rat liver homogenate metabolizing system (S9), at a 1% final concentration with cell harvest after a 20-hour expression period and a 24-hour exposure in the absence of metabolic activation. The dose levels used in the Main Experiment were selected using data from the Cell Growth Inhibition Test (Preliminary Toxicity Test) where the results indicated that the maximum concentration should be limited on precipitate and cytotoxicity. The dose levels selected for the Main Test were as follows: 4(20)-hour with S9-Mix (2%): 0, 10, 20, 30, 40, 60, 80 μg/mL, 4(20)-hour without S9 Mix: 0, 10, 20, 40, 50, 100, 120, 180 μg/mL, 4(20)-hour with S9-Mix (1%): 0, 10, 20, 40, 50, 100, 120, 180 μg/mL and 24-hour without S9: 0, 10, 20, 30, 40, 60, 80 μg/mL, respectively. All vehicle (DMSO) controls had frequencies of cells with aberrations within the range expected for normal human lymphocytes. All the positive control items induced statistically significant increases in the frequency of cells with aberrations indicating that the sensitivity of the assay and the efficacy of the S9 mix were validated. The test item did not induce any statistically significant increases in the frequency of cells with aberrations in the 4(20)-hour exposure groups in the absence and presence of S9, or the 4(20)-hour exposure group in the absence of S9 at dose levels that achieved near optimum toxicity (approximately 50% mitotic inhibition). Under the conditions of this study, the test item was considered to be non-clastogenic to human lymphocytes in vitro.
Justification for classification or non-classification
The substance does not meet classification criteria under Regulation (EC) No 1272/2008 for mutagenicity
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)