Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 701-241-0
CAS number: -
A constituent approach has been used to assess the degradation potential of the substance. Many of the substance constituents are readily biodegradable based on predictions made using the BIOWIN model (US EPA 2010). For hydrocarbon constituents, half life values have been predicted using the BIOHCWIN model (US EPA 2010). For diisopropylether and 1-isopropoxypropane biodegradation simulation studies are not required as the substances do not have a high potential for adsorption to sediment and are highly volatile.
The constituents 1-propanol, propene, 2-propanone, 2-propanol and C6 alcohols are predicted to be readily biodegradable based on BIOWIN predictions (US EPA 2010). Most C6 alkane and alkene constituents are predicted to be readily biodegradable, with the exception of 2,3-dimethylbutane and 2,3-dimethyl-2-butene. Some C9 alkanes and alkenes are also predicted to be readily biodegradable (nonene, nonane and 2-methyl-1-octene).
Predictions were determined for each representative constituent for which the model was suitable, using the BIOHCWIN model. Persistence potential was determined based on half-life (Persistent if: half-life >40 days). All of the constituents for which the model was suitable were found to be not persistent except for cyclohexane (half-life: 55.38).
For diisopropylether and 1-isopropoxypropane, biodegradation simulation studies are not required as the substances do not have a high potential for adsorption to sediment and are highly volatile. This is supported by the n-octanol/water partition coefficient information indicating that diisopropylether has a log Kow of 1.52 – 1.88 and 1-isopropoxypropane has a log Kow of 1.96 (predictions and experimental values from KOWWIN v1.68). Vapour pressure values of 19900 Pa (diisopropylether, experimental) and 11400 Pa (1-isopropoxypropane, predicted) and Henry’s law constant values of 250 Pa/m3/mol (diisopropylether, experimental) and 271 Pa/m3/mol (1-isopropoxypropane, predicted), taken from MPBPVP v1.43 and HENRYWIN v3.20, also support this conclusion.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Esta web utiliza cookies para mejorar su experiencia de navegación en nuestros sitios web.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again