Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Instruction for eye contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.

Instruction for skin contact:
Wash with soap and water. If signs/symptoms develop, get medical attention.

Instructions for inhalation:
Remove person to fresh air. If you feel unwell, get medical attention.

Instructions for ingestion:
Rinse mouth. If you feel unwell, get medical attention.

Fire-fighting measures

Suitable extinguishing media :
Use a fire fighting agent suitable for flammable liquids or gases such as dry chemical or carbon dioxide.

Special hazards arising from the substance or mixture :
Exposure to extreme heat can give rise to thermal decomposition.
Hazardous Decomposition or By-Products during combustion :
Carbon monoxide
Carbon dioxide
Hydrogen Fluoride
Oxides of sulphur
Toxic vapour, gas, particulate

Fire fighting procedures :
When fire fighting conditions are severe and total thermal decomposition of the product is possible, wear full protective
clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus,tunic and trousers
(leggings),bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.

Accidental release measures

Personal precautions, protective equipment and emergency procedures :
Ventilate the area with fresh air.

Environmental precautions :
Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or
bodies of water.

Methods and material for containment and cleaning up :
Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially
available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent
material does not remove a toxic, corrosivity or flammability hazard. Collect as much of the spilled material as possible.
Clean up residue with an appropriate solvent selected by a qualified and authorised person. Ventilate the area with fresh air.
Read and follow safety precautions on the solvent label and Safety Data Sheet. Place in a closed container approved for
transportation by appropriate authorities. Seal the container. Dispose of collected material as soon as possible.

Handling and storage

Precautions for safe handling:
For industrial or professional use only. Do not breathe dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on
clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.

Conditions for safe storage including any incompatibilities:
Store away from strong bases.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
Not hazardous for transportation

Exposure controls / personal protection

Engineering controls:
For those situations where the material might be exposed to extreme overheating due to misuse or equipment failure, use with
appropriate local exhaust ventilation (90 % effective) sufficient to maintain levels of thermal decomposition products below their exposure
guidelines. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant
Exposure Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection
equipment.

Personal protective equipment (PPE):
Eye/face protection :Wear eye/face protection.
The following eye protection(s) are recommended: Safety glasses with side shields.

Skin/hand protection:Wear protective gloves.
Gloves made from the following material(s) are recommended: Neoprene.Nitrile rubber.Polymer laminate

Respiratory protection:
Select one of the following approved respirators based on airborne concentration of contaminants and in accordance with
regulations:
Half facepiece or fullface air-purifying respirator with organic vapour cartridges and P2 particulate prefilters.
Half facepiece or fullface supplied-air respirator (97.5 % effective)

Stability and reactivity

Disposal considerations