Registration Dossier

Administrative data

First-aid measures

Inhalation: If inhaled, provide fresh air, warmth and rest. If necessary seek medical advice.

Skin contact: Clean areas of skin affected with soap and plenty of water. If necessary seek medical advice.

Eye contact: In case of contact with eyes, rinse immediately with plenty of water until irritation subsides.

Ingestion: Allow the patient to vomit on his own accord. Give copious water to drink and if necessary seek medical advice.

Fire-fighting measures

General hazard: The product will burn in a fire

Extinguishing media: To suit local surroundings (e.g. water spray, carbon dioxide, foam, chemical powder)

Special exposure hazards: Decomposition products released in a fire, (oxides of carbon and nitrogen), should be considered toxic if inhaled.

Protective equipment: Wear self-contained breathing apparatus and a chemical resistant suit.

Further information: Avoid run-off water entering the drains (e.g. use barriers).

Accidental release measures

Methods for cleaning up: Take up mechanically (e.g.sweep or vacuum up) into tightly closable containers. Label container and dispose of as
prescribed.

Environmental considerations: Do not allow to get into waste water or waterways; if this occurs, inform the relevant water authority at once.

Handling and storage

Advice on safe handling: Handle in accordance with good hygiene and safety practice.

Storage conditions: Ensure adequate ventilation of the storage area. Keep containers tightly closed, cool and dry.

Transport information

Land transport (ADR/RID)

UN number:
3077
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (2-BUTYL-3-(4- HYDROXYBENZOYL)-5-NITRO-BENZOFURAN)
Chemical name:
2-BUTYL-3-(4- HYDROXYBENZOYL)-5-NITRO-BENZOFURAN
Language:
English
Class:
9
Packaging group:
III
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

LTEL (8 hour TWA): ppm 1-5 mg/m3 In house
STEL (15min) ppm 3-15 mg/m3 In house

Engineering controls: Ensure adequate ventilation of working area.

Personal protection: Observe normal standards for handling chemicals.

Wash hands before breaks and after work.

Wear personal protective equipment appropriate to the task (see below).

Eye protection: Safety goggles.

Skin protection: PVC gloves.

Respiratory protection: Dust masks or air fed visor (if ventilation is insufficient).

Other protection: Protective overalls.

Further Information: Personal protective equipment should be selected as appropriate to the nature and aggressiveness of the identified hazard(s). It should be regularly inspected for such things as soundness against leaks, bad fitting and possible chemical penetration. Recommended safe user
periods should never be exceeded.

Stability and reactivity

No stability data available.

Disposal considerations

In accordance with national (i.e. Hazardous Waste Regulations) and local authority regulations, e.g. incineration.