Registration Dossier

Administrative data

First-aid measures

After inhalation:
Supply fresh air. If symptoms are experienced, get medical attention. In case of unconsciousness place patient stably in side position for transportation.

After skin contact:
Immediately rinse with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if irritation or skin rash occurs.

After eye contact:
Immediately rinse with plenty of water. Remove contact lenses if present and easy to do. Hold eyelids apart and flush eyes with plenty of cool low-pressure water for 15 minutes. Consult an ophtalmologist.

After ingestion:
If the person is conscious, rinse out mouth with water. Call for a doctor immediately.

Fire-fighting measures

Suitable extinguishing agents: carbon dioxide, foam, fire-extinguishing powder.

Hazardous thermal decomposition products: irritant and acrid fumes.

Special protective equipment for fire-fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus.

Additional information: cool endangered receptacles with water spray.

Accidental release measures

Personal precautions and protective equipment:
Wear personal protective equipment. Keep unprotected person away.
Provide adequate ventilation.

Measures for environmental protection:
Do not allow product to reach soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (soil, waterways, drains or sewers).

Methods and material for cleaning up/collecting:
- Small spills :
Absorb spilled liquid with inert absorbent. Collect and seal in an appropriate container properly labelled for disposal.
- Large spills :
Stop spill if it can be done without danger. Dike. Pump as much liquid as possible with an explosion-proof pump or a hand pump. Absorb the remaining liquid with inert absorbent. Collect and seal in an appropriate container properly labelled for disposal.

Handling and storage

Precautions for safe handling:
Wear personal protective equipment. Provide adequate ventilation. Protect from heat and keep ignition sources away.

Conditions for safe storage:
Store under cover in a cool well-ventilated place. Store only in the original container. Keep container tightly sealed. Keep away from sources of ignition. Protect from heat and direct sunlight.

Transport information

Land transport (ADR/RID)

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. ((-) nopyl acetate)
Chemical name:
(-) nopyl acetate
Language:
English
Class:
9
Classification code:
M6
Packaging group:
III
Labels:
9
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. ((-) nopyl acetate)
Chemical name:
(-) nopyl acetate
Language:
English
Class:
9
Classification code:
M6
Packaging group:
III
Labels:
9
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. ((-) nopyl acetate)
Chemical name:
(-) nopyl acetate
Class:
9
Packaging group:
III
EmS code:
F-A, S-F
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. ((-) nopyl acetate)
Chemical name:
(-) nopyl acetate
Class:
9
Packaging group:
III
Labels:
9
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures:
Provide local exhaust or general room ventilation to minimize exposure to vapours. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.

General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals. Avoid contact with eyes and skin.
Immediately remove all soiled and contaminated clothing.

Respiratory protection:
Use suitable respiratory protective device in case of insufficient ventilation.

Hand protection:
Protective gloves resistant to chemicals (standard EN 374-1).
Gloves should be discarded and replaced regularly. They should be replaced immediately if if there is any indication of degradation or chemical breakthrough.

Eye protection: safety glasses

Body protection: protective work clothing

Stability and reactivity

Chemical stability :
Product stable under storage and handling conditions according to specifications (cf "handling and storage").

Conditions to avoid :
Keep away from heat and sources of ignition.

Materials to avoid :
Avoid contact with strong mineral acids.

Disposal considerations

Product:
After prior treatment the product may be disposed of in an incinerator for special waste adhering to the regulations pertaining to the disposal of special waste. Disposal must be made according to local/regional/national/international regulations.

Uncleaned packaging:
Dispose of content/container must be made according to local/regional/national/international regulations.