Registration Dossier

Administrative data

First-aid measures

Skin Contact
Possible redness and irritation of affected areas
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes.
Seek medical attention if irritation persists

Eye Contact
If substance has got into eyes, immediately wash out with plenty of water
Seek medical advice if any adverse effects persist.

Inhalation
In cases of severe exposure, breathing difficulty may develop
Remove patient to fresh air
Seek medical attention if irritation persists

Ingestion
In cases of severe exposure, burning sensation may develop
Do not induce vomiting
Give plenty of water to drink
When in doubt or symptoms persist, seek medical attention

General Advice
NOTE TO PHYSICIANS: Treat by observation and supportive measures as indicated by the patient's condition
See available toxicological information

Fire-fighting measures

Suitable extinguishing media
In case of fire use water, foam or dry agent
Do not use water jets

Decomposition
Decomposition products may include toxic and irritant fumes
Decomposition products may include carbon oxides

Fire fighting equipment / instructions
Keep container(s) exposed to fire cool, by spraying with water
High concentration of airborne dust may form explosive mixture with air. Ensure that good housekeeping practices are followed as well as applicable guidelines such as the National Fire Protection Association [NFPA] 654, "Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids".
Vapours may be heavier than air and may travel along the ground to some distant source of ignition and flash back.
Wear Chemical Protection Suit and Positive-Pressure Breathing Apparatus

Explosion Sensitivity to Impact
No data available for this product

Accidental release measures

Environmental Precautions
Eliminate sources of ignition.
If contamination of drainage systems or water courses is unavoidable, immediately inform appropriate authorities
For large spills, wet down with water and dike for later disposal.

Personal Precautions
Wear protective clothing as per Exposure Controls / Personal Protection
use non-sparking handtools

Methods for Cleaning Up
Shut off all ignition sources
Contain spillage by any means possible
Collect as much as possible in clean container for reuse or disposal
Absorb spillage in suitable inert material

Handling and storage

Handling
Keep this product from heat, sparks, or open flame.
Ensure adequate ventilation
Material can accumulate static charges from material handling management. Bond and ground as appropriate. For additional recommendations, consult an applicable guideline such as National Fire Protection Association [NFPA] 77, "Recommended Practices on Static Electricity".
NOTE: The Lower Explosive Limit [LEL] for organic liquids can range from as low as 0.5 - 1 %.
Do not breathe vapour
Rotate stock using the oldest material first.
Use good personal hygiene practices

Storage
Keep in a cool, well ventilated place away from foodstuff
Bond and ground containers when transferring material.
Do not cut, weld, solder, drill, grind or expose containers to heat, flame, sparks, or other sources of ignition.
Empty product containers may contain product residue. Do not reuse empty containers.

Transport information

Land transport (ADR/RID)

UN number:
UN3082
Shippingopen allclose all
Class:
9
Packaging group:
III
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN3082
Shippingopen allclose all
Class:
9
Packaging group:
III
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (diisopropylbenzenes)
Chemical name:
diisopropylbenzenes
Class:
9
Packaging group:
III
EmS code:
EmS F-A, S-F
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN3082
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (diisopropylbenzenes)
Chemical name:
diisopropylbenzenes
Class:
9
Packaging group:
III
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Occupational exposure controls
If practicable, engineering controls should be provided where airborne concentrations exceed exposure limits
Ventilation should be sufficient to effectively remove, and prevent buildup of, any vapors, dusts, or fumes that may be generated
during handling or thermal processing. In order to ensure appropriate electrial safety practices are followed, consult applicable
standards. These may include guidelines such as the National Fire Protection Association [NFPA] 70, "The National Electrical Code"
and NFPA 499, "Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for
Electrical Installations in Chemical Process Areas". NOTE: since this material's vapors, dust or fumes can form explosive mixtures
in air, ensure that any potential areas where explosions may occur are designed to minimize potential damage. For
recommendations to prevent such explosions and associated damage, consult applicable guidelines such as National Fire Protection
Association [NFPA] 69, "Standard on Explosion Prevention Systems" and/or NFPA 68, "Guide for Venting Deflagrations".

Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment

Hand protection
Nitrile or PVC coated gloves with an estimated breakthrough time of > 100 minutes are recommended.

Eye protection
Wear eye/face protection
If splashes are likely to occur, wear: a visor

Skin protection
Wear suitable protective equipment
Wear synthetic [rubber] safety footwear with anti-slip soles.

Stability and reactivity

Stability
Stable under normal conditions [e.g., 70 oF (21 oC) & 14.7 psig (760 mmHg)].

Conditions to avoid
Keep away from heat and sources of ignition.

Materials to avoid
This material may react with: strong oxidizing agents

Disposal considerations

Disposal Instructions
Disposal should be in accordance with local, state or national legislation

Contaminated Packaging
This material and its container must be disposed of as hazardous waste