Registration Dossier

Administrative data

First-aid measures

General advice
Take off all contaminated clothing immediately. Never give anything by mouth to an unconscious person. Remove from exposure, lie down.
In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Inhalation
Remove to fresh air. Call a physician immediately.

Skin contact
Wash off immediately with soap and plenty of water.

Eye contact
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion
Clean mouth with water and drink afterwards plenty of water, if a person vomits when lying on his back, place him in the recovery position. Do NOT induce vomiting. If swallowed, seek medical advice immediately and show this container or label.

Fire-fighting measures

Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Extinguishing media which shall not be used for safety reasons:
High volume water jet

Specific hazards during fire fighting:
Cool closed containers exposed to fire with water spray. Do not allow run-off from fire fighting to enter drains or water courses.

Special protective equipment for fire-fighters:
Use personal protective equipment.

Further information:
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions
Wear respiratory protection. Wear personal protective equipment.

Environmental precautions
Avoid subsoil penetration. Do not allow material to contaminate ground water system. Do not contaminate water. If the product contaminates rivers and lakes or drains inform respective authorities. Do not let product enter drains.

Methods for cleaning up
Remove mechanically and with care (e.g. with clean polyethylene plastic shovel). Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations.

Additional advice
Never add other substances or waste material to product residue. Move product residue to a safe place and dispose of properly.

Handling and storage

Advice on protection against fire and explosion:
Avoid shock and friction

Storage:
Requirements for storage areas and containers:
Electrical installations / working materials must comply with the technological safety standards. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Keep container tightly closed. No smoking.

Further information on storage conditions:
Avoid impurities (e.g. rust, dust, ash), risk of decomposition.

Advice on common storage:
Store apart from other dangerous and incompatible substances

Storage temperature:
< 10 °C

Transport information

Land transport (ADR/RID)

UN number:
3111
Proper shipping name and description:
ORGANIC PEROXIDE TYPE B, LIQUID, TEMPERATURE CONTROLLED
Chemical name:
tert-butyl peroxyisobutyrate
Class:
5.2
Classification code:
P2
Packaging group:
--
Labels:
5.2
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
3111
Proper shipping name and description:
ORGANIC PEROXIDE TYPE B, LIQUID, TEMPERATURE CONTROLLED
Chemical name:
tert-butyl peroxybutyrate
Language:
English
Class:
5.2
Classification code:
P2
Packaging group:
--
Labels:
5.2
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3111
Proper shipping name and description:
ORGANIC PEROXIDE TYPE B, LIQUID, TEMPERATURE CONTROLLED (tert-butyl peroxyisobutyrate)
Chemical name:
tert-butyl peroxyisobutyrate
Class:
5.2
Packaging group:
--
EmS code:
Number 1: F-F
Number 2: S-R
Labels:
5.2
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3111
Proper shipping name and description:
ORGANIC PEROXIDE TYPE B, LIQUID, TEMPERATURE CONTROLLED (tert-butyl peroxyisobutyrate)
Chemical name:
tert-butyl peroxyisobutyrate
Class:
P2
Packaging group:
--
Labels:
5.2
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General advice
Provide adequate ventilation.

Personal protective equipment
Respiratory protection: Short duration filter unit: Filter A

Hand protection: Skin should be washed after contact.

Glove thickness: 0,5 mm
Break through time :>=8h
Material: butyl-rubber
Eve protection: Tightly fitting safety goggles. Face protection.

Skin and body protection: Protective suit. Remove and wash contaminated clothing before re-use.

Hygiene measures: Wash hands before breaks and immediately after handling the product. Keep away from food, drink and animal feeding stuffs.


Stability and reactivity

Conditions to avoid: Keep away from heat and sources of ignition.

Materials to avoid: Accelerators, strong acids and bases, heavy metal salts, reduction mediums; Avoid impurities (e.g. rust, dust, ash), risk of decomposition.

Hazardous decomposition products: Irritant, caustic, flammable, noxious/toxic gases and vapours can develop in the case of fire and decomposition

Thermal decomposition: ca. 25°C Method: SADT (UN test H.4) SADT possible at temperatures above approximately 25 °C.

Hazardous reactions: General Information: Vapours may form explosive mixture with air. Stability: Stable under recommended storage conditions.

Disposal considerations

Advice on disposal and packaging:
Disposal: Dispose of in conjunction with appropriate waste disposal authorities and in accordance with disposal regulations.