Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures
General information
Remove contaminated clothing and shoes immediately, and launder thoroughly before reusing. Seek medical advice immediately.
After inhalation
Remove affected person from the immediate area. Ensure supply of fresh air. Irregular breathing/no breathing: artificial respiration. Do not use mouth-to-mouth or mouth-to-nose resuscitation.
After skin contact
Wash immediately with plenty of water for several minutes.
After eye contact
Remove contact lens. Rinse eye thoroughly under running water keeping eyelids wide open and protecting the unaffected eye (at least 10 to 15 minutes). Seek medical assistance.
After ingestion
Call a doctor immediately. Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person. Do not induce vomiting.
Most important symptoms and effects, both acute and delayed
No data available.
Indication of any immediate medical attention and special treatment needed
No data available.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media
Foam; Carbon dioxide; Extinguishing powder; Water spray jet
Unsuitable extinguishing media
High power water jet
Special hazards arising from the substance or mixture
No data available.
Advice for firefighters
Run-off water from fire fighting must not be discharged into drains or enter surface water. Use self-contained breathing apparatus. Wear protective clothing.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency personnel
Refer to protective measures listed in sections 7 and 8. Ensure adequate ventilation. Avoid dust formation. Keep away sources of ignition.
For emergency responders
No data available. Personal protective equipment (PPE) - see Section 8.
Environmental precautions
Do not discharge into the drains/surface waters/groundwater.
Methods and material for containment and cleaning up
Take up mechanically. Avoid raising dust. When picked up, treat material as prescribed under heading "Disposal considerations".
Reference to other sections
No data available.

Handling and storage

Precautions for safe handling
Advice on safe handling
Treatment of product if possible in enclosed systems. Provide suitable exhaust ventilation at the processing machines. When filling, transferring, or emptying of containers, adequate suctioning close to work place necessary. Avoid the formation and deposition of dust.
General protective and hygiene measures
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Wash hands before breaks and after work. Provide eye wash fountain in work area. Do not inhale dust. Avoid product contact with skin, eyes and clothing; Store work clothing separately.
Advice on protection against fire and explosion
Keep away from sources of heat and ignition.
Conditions for safe storage, including any incompatibilities
Technical measures and storage conditions
Keep container tightly closed in a cool, well-ventilated place. Keep under lock and key or accessible only to specialists or people who are authorized.
Requirements for storage rooms and vessels
Always keep in containers of same material as the original one.
Advice on storage assembly
Do not store together with: Aluminium; cadmium; Zinc
Specific end use(s)
No data available.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Appropriate engineering controls
No data available.
Personal protective equipment
Respiratory protection
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of dust formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified.
Respirator FFP2SL (EN 149)
Eye / face protection
Tightly fitting safety glasses (EN 166).
Hand protection
Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk of skin contact with the product . Before use, the protective gloves should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer’s instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.
Other
Normal chemical work clothing.
Environmental exposure controls
No data available.

Stability and reactivity

Reactivity
No data available.
Chemical stability
Stable under recommended storage and handling conditions (See section 7).
Possibility of hazardous reactions
No data available.
Conditions to avoid
No data available.
Incompatible materials
Aluminium; cadmium; Zinc
Hazardous decomposition products
No data available.

Disposal considerations

Waste treatment methods
Product
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.
Packaging
Residuals must be removed from packaging and when emptied completely disposed of in accordance with the regulations for waste removal. Incompletely emptied packaging must be disposed of in the form of disposal specified by the regional disposer.