Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 230-811-7 | CAS number: 7328-17-8
Guidance on Safe Use
Administrative data
First-aid measures
-Inhalation: Fresh air. Move into fresh air and keep at rest. For breathing difficulties oxygen may be necessary. Get medical attention if any discomfort continues.
-Ingestion: Immediately rinse mouth and drink plenty of water. Keep person under observation. If person becomes uncomfortable seek hospital and bring these instructions.
-Skin contact: Remove contaminated clothing immediately and wash skin with soap and water. Remove contaminated clothes and rinse skin thoroughly with water. Get medical attention promptly if symptoms occur after washing.
-Eye contact: Continue to rinse for at least 15 minutes and get medical attention.
Fire-fighting measures
-Extinguishing media.
water spray, dry powder or carbon dioxide.
-Special hazards arising from the substance or mixture.
Hazardous combustion products; during fire, toxic gases (CO, CO2) are formed.
-Advice for firefighters.
Protective equipment for fire-fighters; self contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental release measures
-Personal precautions, protective equipment and emergency procedures.
Use protective gloves, goggles and suitable protective clothing. In case of inadequate ventilation, use respiratory protection. In case of splashes: Wear apron or special protective clothing.
-Environmental precautions.
Avoid release to the environment.
-Methods and material for containment and cleaning up.
Remove sources of ignition. Absorb with sand or other inert absorbent. Spillage may be stored as chemical waste in approved area.
Handling and storage
-Precautions for safe handling.
Keep away from heat, sparks and open flame. Use mechanical ventilation in case of handling which causes formation of vapours. Handle and open container with care. Wear full protective clothing for prolonged exposure and/or high concentrations.
-Conditions for safe storage, including any incompatibilities.
Protect from light, including direct sunrays. Keep containers tightly closed. Store in tightly closed original container in a dry, cool and
well-ventilated place. Store in closed original container at temperatures between 5°C and 30°C. Must not be exposed to temperatures
above 40 degree celcius.
-Specific end use(s).
The identified uses for this product are detailed in Section 3.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Engineering measures:
-Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure limit is not
exceeded.
For personal protection:
-Skin protection: Wear apron or protective clothing in case of contact.
-Respiratory equipment: If ventilation is insufficient. High-efficiency particulate respirator with full facepiece.
-Eye protection: Wear approved chemical safety goggles where eye exposure is reasonably probable. Wear goggles/face shield.
-Hygiene measures: Wash hands after handling. Wash contaminated clothing before reuse.
Stability and reactivity
-Chemical stability: Stable under normal temperature conditions.
-Possibility of hazardous reactions: May polymerise.
-Conditions to avoid: Avoid heat, flames and other sources of ignition. Avoid contact with isocyanates and oxidising agents. Avoid contact with free radical
initiators. Avoid contact with vinyl polymerization initiators. Avoid exposure to high temperatures or direct sunlight.
-Materials To Avoid: Avoid contact with radical forming initiators, peroxides, strong alkalies or reactive metals to prevent exothermic polymerization.
-Hazardous decomposition products: Oxides of carbon.
Disposal considerations
Waste to be treated as controlled waste. Disposal to licensed waste disposal site in accordance with local Waste Disposal Authority.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
