CEPE Use map, Version 2, November 2020- In this Use Map the term 'paint'/'painting' can also cover related products applied by similar processes, such as fillers and putties (i.e. those in Product Category PC9b as well as PC9a).
- ESCom standard phrase codes are listed where the exact corresponding phrases are available in the library. These are limited until the phrase library is updated in future; any such changes will be reflected in a future update to this Use Map.
- Sector of use (SU) is specified only for printing inks. Paints/coatings are used in multiple sectors, so the SU is indicated as 'various'.
- Subsequent service life is applicable only for solid (i.e. non-volatile) substances in coatings or inks. CEPE is unable to provide comprehensive information on service life for the many and varied uses of coatings and inks; in most cases however substances are not intended to be released from the paint/ink film during service life. For more information refer to the CEPE website as shown on the Disclaimer tab."
- Contributing activities (CAs) for Workers are not itemized individually in this file. Refer to the relevant files (SWEDs or previous use mapping) indicated in column S for details of these CAs.
- With the exception of the Formulation life cycle stage: for each use indicated all worker or consumer CAs are to be assessed, but the appropriate SPERC(s) must be selected for the substance in question (i.e. volatile or solid). (For Formulation, the CSA can include all or an appropriate selection of worker CAs from the linked mapping sheets.)
- CEPE's SWEDs and SCEDs are primarily designed for use with Tier 1 assessment models (ECETOC TRA, Chesar). The information may also be used in higher-tier models, but at this time no information specific for such models is included in those inputs.
- This Use Map is intended to cover the majority of typical uses of coatings and inks. Additional specific uses may be assessed using contributing activities from the previous use maps referenced on each worksheet in this file.(Generated by Chesar 3.6.0)CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T11:06:102018-07-02T13:01:25ACTIVEv1Interior spray paints – aerosolSpray paint – indoor application by aerosol can (speciality uses e.g. radiator paint).All substances used in consumer spray paints marketed for the above purpose.PC_9aCEPE_SCED_9a_05_v1www.cepe.orgLIQUIDS_GASTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse300.0TRA_CONSUMER_EXPOSURE_TIMEUnchanged from ECETOC TRA default valuefalse0.33TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-YESTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURE0.5 (solvent/carrier)
0.3 (other substances)
CEPE suggested defaults, to be used only in absence of more specific information about substance concentration in product.false50.0TRA_CONSUMER_FREQUENCY_YEAR5 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T11:20:252018-07-02T13:15:58ACTIVEv1Plasters and floor equalisersFillers and putties – indoor application (wall and wood repairs).All substances used in consumer filling products marketed for the above purpose.PC_9bCEPE_SCED_9b_10_v1.1www.cepe.orgLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse25000.0TRA_CONSUMER_EXPOSURE_TIMEUnchanged from ECETOC TRA default valuefalse4.0TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURECEPE suggested default, to be used only in absence of more specific information about substance concentration in product.false90.0TRA_CONSUMER_FREQUENCY_YEAR5 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T11:18:262018-07-02T13:01:11ACTIVEv1Fillers and puttiesFillers and putties – indoor application (wall and wood repairs).All substances used in consumer filling products marketed for the above purpose.PC_9bCEPE_SCED_9b_09_v1.1www.cepe.orgLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse2000.0TRA_CONSUMER_EXPOSURE_TIMEUnchanged from ECETOC TRA default valuefalse4.0TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURECEPE suggested default, to be used only in absence of more specific information about substance concentration in product.false90.0TRA_CONSUMER_FREQUENCY_YEAR7 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T10:59:412018-07-02T13:00:54ACTIVEv1Exterior trim paints – roller/brushTrim paints (water-based/solvent-based/high solids) – outdoor application by roller or brush (doors, window frames etc.).All substances used in consumer paints marketed for the above purpose.PC_9aCEPE_SCED_9a_04_v1www.cepe.orgLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse1300.0TRA_CONSUMER_EXPOSURE_TIMECEPE consumer painting survey 2015 (90th percentile); includes exposure time whilst not actually paintingfalse8.0TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_OUTDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURE0.5 (solvent/carrier)
0.3 (other substances)
CEPE suggested defaults, to be used only in absence of more specific information about substance concentration in product.false50.0TRA_CONSUMER_FREQUENCY_YEAR8 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-09T14:52:592018-07-02T13:01:40ACTIVEv1Interior wall paints – roller/brushWater based paints – indoor application by roller or brush (walls, floors and ceilings).All substances used in water-based consumer paints marketed for the above purpose.PC_9aCEPE_SCED_9a_01_v1www.cepe.orgLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse3750.0TRA_CONSUMER_EXPOSURE_TIMECEPE consumer painting survey 2015 (90th percentile); includes exposure time whilst not actually paintingfalse8.0TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURE0.5 (solvent/carrier)
0.3 (other substances)
CEPE suggested defaults, to be used only in absence of more specific information about substance concentration in product.false50.0TRA_CONSUMER_FREQUENCY_YEAR7 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T10:47:452018-07-02T13:01:04ACTIVEv1Exterior wall paints – roller/brushWater based paints – outdoor application by roller or brush (walls).All substances used in water-based consumer paints marketed for the above purpose.PC_9aCEPE_SCED_9a_02_v1www.cepe.orgLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse3750.0TRA_CONSUMER_EXPOSURE_TIMECEPE consumer painting survey 2015 (90th percentile); includes exposure time whilst not actually paintingfalse8.0TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_OUTDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURE0.5 (solvent/carrier)
0.3 (other substances)
CEPE suggested defaults, to be used only in absence of more specific information about substance concentration in product.false50.0TRA_CONSUMER_FREQUENCY_YEAR8 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T10:57:362018-07-02T13:01:32ACTIVEv1Interior trim paints – roller/brushTrim paints (water-based/solvent-based/high solids) – indoor application by roller or brush (doors, window frames etc.).All substances used in consumer paints marketed for the above purpose.PC_9aCEPE_SCED_9a_03_v1www.cepe.orgLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse1300.0TRA_CONSUMER_EXPOSURE_TIMECEPE consumer painting survey 2015 (90th percentile); includes exposure time whilst not actually paintingfalse7.0TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURE0.5 (solvent/carrier)
0.3 (other substances)
CEPE suggested defaults, to be used only in absence of more specific information about substance concentration in product.false50.0TRA_CONSUMER_FREQUENCY_YEAR7 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T11:13:502018-07-02T13:00:39ACTIVEv1Exterior removers – roller/brushRemovers (paint-, glue-, wallpaper-, sealant-remover) – outdoor application by roller or brush.All substances used in/as removers marketed for consumer use as described above.PC_9aCEPE_SCED_9a_08_v1www.cepe.orgLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse2000.0TRA_CONSUMER_EXPOSURE_TIMECEPE consumer painting survey 2015 (90th percentile); includes exposure time whilst not actually applyingfalse8.0TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREUnchanged from ECETOC TRA default valuefalse90.0TRA_CONSUMER_FREQUENCY_YEAR8 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T11:09:372018-07-02T13:00:47ACTIVEv1Exterior spray paints – aerosolSpray paint – outdoor application by aerosol can (speciality uses e.g. metal objects).All substances used in consumer spray paints marketed for the above purpose.PC_9aCEPE_SCED_9a_06_v1www.cepe.orgLIQUIDS_GASTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse300.0TRA_CONSUMER_EXPOSURE_TIMEUnchanged from ECETOC TRA default valuefalse0.33TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-YESTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_OUTDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURE0.5 (solvent/carrier)
0.3 (other substances)
CEPE suggested defaults, to be used only in absence of more specific information about substance concentration in product.false50.0TRA_CONSUMER_FREQUENCY_YEAR8 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32018-01-10T11:12:022018-07-02T13:01:18ACTIVEv1Interior removers – roller/brushRemovers (paint-, glue-, wallpaper-, sealant-remover) – indoor application by roller or brush.All substances used in/as removers marketed for consumer use as described above.PC_9aCEPE_SCED_9a_07_v1www.cepe.orgLIQUIDSTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_DERMAL_ROUTE_YESTRA_CONSUMER_DERMAL_TRANSFER_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_BODY_PARTY_DERMALfalseINSIDE_HANDS_IDTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTEfalseTRA_CONSUMER_EXPOSURE_VIA_INHALATION_ROUTE_YESTRA_CONSUMER_AMOUNT_OF_PRODUCT_USED_PER_APPLICATIONUnchanged from ECETOC TRA default valuefalse2000.0TRA_CONSUMER_EXPOSURE_TIMECEPE consumer painting survey 2015 (90th percentile); includes exposure time whilst not actually applyingfalse8.0TRA_CONSUMER_INHALATION_FACTORUnchanged from ECETOC TRA default valuefalse1.0TRA_CONSUMER_SPRAYfalseSPRAY-NOTRA_CONSUMER_PLACE_OF_USEfalseTRA_CONSUMER_PLACE_OF_USE_INDOORTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTENegligible hand-to-mouth transfer can be assumed for adult users – hand washing is normal before eating, smoking etc.falseTRA_CONSUMER_EXPOSURE_VIA_ORAL_ROUTE_NOTRA_CONSUMER_ADULT_CHILD_ASSUMEDfalseTRA_CONSUMER_ADULT_ASSUMEDC_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREUnchanged from ECETOC TRA default valuefalse90.0TRA_CONSUMER_FREQUENCY_YEAR7 days/year
CEPE consumer painting survey 2015; 90th percentile for relevant job type. ECHA Guidance on Information Requirements and Chemical Safety Assessment Chapter R.15: Consumer Exposure Assessment defines infrequent use as <15 days per year.falseTRA_CONSUMER_FREQUENCY_YEAR_INFREQUENTTRA_CONSUMER_FREQUENCY_OF_USEfalse1.0March 2017CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:30:052021-01-07T11:30:05ACTIVECEPE SpERC 8d.1a.v2Application - consumer - brush/roller - outdoor use - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by consumers by brush or roller.
*Includes: Application of coatings by brush or roller
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseCONSUMER_USEINDUSTRIALPC_9bPC_9aContinuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
5 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 0.5
Binder 0.5
Water 1.50
Organic solvent/coalescent 2.2
Additives 0.03For a coating film to form, the volatile phase of organic solvent borne and water borne coatings must evaporate into the atmosphere.Application equipment (brushes/rollers/containers/roller trays) can be washed in domestic sinks and washings discharged into public sewers.
OECD ESDDuring application of coatings outdoors, a proportion of the applied coating (solid phase) can be deposited on the soil below the area being painted.
No OECD ESD – industry dataESD (Fig 4.1)Application - consumer - brush/roller - outdoor use – volatilesCEPE SPERC 8d.1a.v2ERC_8d1.093.00.06.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_OUTDOORWATER_CONTACT_DURING_USEby equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authorityfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authoritytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:50:092021-01-07T10:50:09ACTIVECEPE SPERC 2.4c.v2Formulation of organic solvent and water borne coatings and inks (where specific formulation not known) - non volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Additional specification of product types covered:
Organic solvent borne coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile content
Water borne coatings and inks:
- may contain solvent up to 25 % volatile content.Covers the whole process of formulation/manufacture of organic solvent and water borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9cPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)ESDESDEMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=en]ESD (tables 4.4 & 5.13)Formulation of organic solvent or water borne coatings and inks – solidsCEPE SPERC 2.4c.v2ERC_20.0050.00970.00.5ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 75 000
Organic solvent/coalescent 100 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:31:532021-01-07T10:31:53ACTIVECEPE SPERC 2.1a.v2Formulation of organic solvent borne coatings and inks - large scale (>1,000 tpa solvent use) – volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Additional specification of product types covered:
Organic solvent borne coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process of formulation/manufacture of organic solvent borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY – ESD - (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=en] (table 4.7)ESDESDESDFormulation of organic solvent borne coatings and inks - large scale (>1,000 tpa solvent use) – volatilesCEPE SPERC 2.1a.v2ERC_20.01.80.00.75ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown:
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 0
Organic solvent/coalescent 100 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:22:142021-01-07T11:22:14ACTIVECEPE SPERC 8a.2a.v2Application - professional - brush/roller - indoor use - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by professional users by brush or roller.
*Includes: Application of coatings by brush or roller
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falsePROFESSIONAL_WORKER_USEINDUSTRIALPC_9bPC_9aSU_17SU_19SU_18Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
25 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 2.5
Binder 2.5
Water 8.25
Organic solvent/coalescent 11.0
Additives 0.13For a coating film to form, the volatile phase of organic solvent borne and water borne coatings must evaporate into the atmosphere.
OECD ESDProfessional applicators tend not to wash equipment.
ESD (Fig 4.2)There is no deposition to soil from indoor application processes.
OECD ESDESD (Fig 4.2)Application - professional – brush/roller - indoor use - volatilesCEPE SPERC 8a.2a.v2ERC_8a0.098.00.02.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEPossible during equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companyfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:35:112021-01-07T10:35:11ACTIVECEPE SPERC 2.1c.v2Formulation of organic solvent borne coatings and inks - non volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Additional specification of product types covered:
Organic solvent borne coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process of formulation/manufacture of organic solvent borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)No direct dust emissions to the air are expected.
Initial loss from handling of solid substances is captured by air extraction devices. Emission limits from the ESDESDESDESD (table 4.4)Formulation of organic solvent borne coatings and inks – solidsCEPE SPERC 2.1c.v2ERC_20.0050.00950.01.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 0
Organic solvent/coalescent 100 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:28:592021-01-07T11:28:59ACTIVECEPE SPERC 8c.3a.v2Application - professional - spraying - indoor use - non volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid spray coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by professional users by spraying.
*Includes: Application of coatings by spray
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falsePROFESSIONAL_WORKER_USEINDUSTRIALPC_9bPC_9aSU_17SU_19SU_18Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
100 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 10.0
Binder 10.0
Water 35.0
Organic solvent/coalescent 45.0
Additives 0.50Based on ESD (Fig 4.2)There is no emission to water during application and drying
OECD ESDThere is no deposition to soil from indoor application processes.
OECD ESD10-60%
Based on ESD (Fig 4.2)Application - professional - spraying - indoor use – solidsCEPE SPERC 8c.3a.v2ERC_8c0.00.00.060.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEPossible by equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companyfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:10:382021-01-07T11:10:38ACTIVECEPE SPERC 4.2a.v2Application - industrial - non-spray - indoor use - incineration - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile content
Powder coatings 100% non-volatileCovers the whole process* of application of organic solvent borne, water borne liquid and powder coatings by industrial users by low-energy processes.
*Includes: Application
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseINDUSTRIAL_USEINDUSTRIALPC_9aPC_18SU_11SU_12SU_15SU_17SU_16SU_19SU_18SU_7225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)97.5% solvent inputs emitted through Incinerator with efficiency 99%
OECD Coatings ESD, coil coatingsOECD Coatings ESD, coil coatingsThere is no deposition to soil from indoor application processes.
OECD ESD1.5-2.5 %
OECD Coatings ESD, flatline furniture/coil coatingsApplication - industrial – non-spray - indoor use - incineration - volatilesCEPE SPERC 4.2a.v2ERC_40.00.50.02.5ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
1000 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 100.0
Binder 100.0
Water 350.0
Organic solvent/coalescent 450.0
Additives 5.0falsetrueEUSES_BIOLOGICAL_STPfalsefalseEUSES_BIOLOGICAL_STP-NONEWATER0.0WASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENTEUSES_DISCHARGE_RATE_OF_EFFLUENTfalsetrue2000.03a947ba9-6c09-4257-aa9e-4dae201fd1e9falsetrue72d88a17-5eee-4f72-87ed-24192215045607/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:37:562021-01-07T10:37:56ACTIVECEPE SPERC 2.2b.v2Formulation of water borne coatings and inks - small scale (<1,000 tpa solvent use) – volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
Solids in polymeric liquids
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Water borne coatings and inks:
- may contain solvent up to 25 % volatile content.Covers the whole process of formulation/manufacture of water borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9cPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)ESD (table 5.13)ESDESDESDFormulation of water borne coatings and inks - small scale (<1,000 tpa solvent use) – volatilesCEPE SPERC 2.2b.v2ERC_20.52.20.00.5ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 75 000
Organic solvent/coalescent 10 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:21:122021-01-07T11:21:12ACTIVECEPE SpERC 8a.1a.v2Application - consumer - brush/roller - indoor use - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by consumers by brush or roller.
*Includes: Application of coatings by brush or roller
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseCONSUMER_USEINDUSTRIALPC_9bPC_9aContinuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
5 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 0.5
Binder 0.5
Water 1.50
Organic solvent/coalescent 2.2
Additives 0.03For a coating film to form, the volatile phase of organic solvent borne and water borne coatings must evaporate into the atmosphere.
OECD ESDApplication equipment (brushes/rollers/containers/roller trays) can be washed in domestic sinks and washings discharged into public sewers.
OECD ESDThere is no deposition to soil from indoor application processes.
OECD ESDESD (Fig 4.1)Application - consumer – brush/roller - indoor use - volatilesCEPE SPERC 8a.1a.v2ERC_8a1.093.00.06.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEby equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authorityfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authoritytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:38:042021-01-07T11:38:04ACTIVECEPE SPERC 8f.2a.v2Application - professional - brush/roller - outdoor use - non volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by professional users by brush or roller.
*Includes: Application of coatings by brush or roller
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falsePROFESSIONAL_WORKER_USEINDUSTRIALPC_9bPC_9aSU_17SU_19SU_18Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
25 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 2.5
Binder 2.5
Water 8.25
Organic solvent/coalescent 11.0
Additives 0.13The solid phase is not emitted to air.There can be losses to sewers from application equipment clean-up.
No OECD – industry dataDuring application of coatings outdoors, a proportion of the applied coating (solid phase) can be deposited on the soil below the area being painted.
No OECD ESD – industry dataESD (Fig 4.2)Application - professional - brush/roller - outdoor use – solidsCEPE SPERC 8f.2a.v2ERC_8f1.00.00.54.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_OUTDOORWATER_CONTACT_DURING_USEPossible during equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companyfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:33:482021-01-07T11:33:48ACTIVECEPE SPERC 8d.3a.v2Application - professional - spraying - outdoor use - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid spray coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by professional users by spraying.
*Includes: Application of coatings by spray
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falsePROFESSIONAL_WORKER_USEINDUSTRIALPC_9bPC_9aSU_17SU_19SU_18Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
100 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 10.0
Binder 10.0
Water 35.0
Organic solvent/coalescent 45.0
Additives 0.50A proportion of the solid phase will be contained in overspray.
OECD ESDDuring application of coatings outdoors, a proportion of the applied coating can be deposited into water
No OECD – industry dataNo OECD ESD – industry dataBased on ESD (Fig 4.2)Application - professional - spraying - outdoor use – volatilesCEPE SPERC 8d.3a.v2ERC_8d2.098.00.00.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_OUTDOORWATER_CONTACT_DURING_USEPossible by equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companyfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:17:562021-01-07T11:17:56ACTIVECEPE SPERC 5.3.v2Application - industrial - non-spray - indoor use - non volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile content
Powder coatings 100% non-volatileCovers the whole process* of application of organic solvent borne, water borne liquid and powder coatings by industrial users by low-energy processes.
*Includes: Application
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseINDUSTRIAL_USEINDUSTRIALPC_9aPC_18SU_11SU_12SU_15SU_17SU_16SU_19SU_18SU_7225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)OECD ESD (flatline furniture coating)Lost through cooling of rollers.
OECD Coatings ESD, coil coatingsThere is no deposition to soil from indoor application processes.
OECD ESD1.5-2.5 %
OECD Coatings ESD, flatline furniture/coil coatingsApplication - industrial – non-spray - indoor use - solidsCEPE SPERC 5.3.v2ERC_50.20.00.02.5ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
1000 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 100.0
Binder 100.0
Water 350.0
Organic solvent/coalescent 450.0
Additives 5.0falsetrueEUSES_BIOLOGICAL_STPfalsefalseEUSES_BIOLOGICAL_STP-NONEWATER0.0WASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENTEUSES_DISCHARGE_RATE_OF_EFFLUENTfalsetrue2000.03a947ba9-6c09-4257-aa9e-4dae201fd1e9falsetrue72d88a17-5eee-4f72-87ed-24192215045607/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:48:512021-01-07T10:48:51ACTIVECEPE SPERC 2.4b.v2Formulation of organic solvent and water borne coatings and inks (where specific formulation not known) - small scale (<1,000 tpa solvent use) – volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Additional specification of product types covered:
Organic solvent borne coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile content
Water borne coatings and inks:
- may contain solvent up to 25 % volatile content.Covers the whole process of formulation/manufacture of organic solvent and water borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9cPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)(total volatiles) ESD (table 4.4 & 5.13)ESDESDESD (tables 4.4 & 5.13)Formulation of organic solvent or water borne coatings and inks - small scale (<1,000 tpa solvent use) – volatilesCEPE SPERC 2.4b.v2ERC_20.53.60.01.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 75 000
Organic solvent/coalescent 100 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:19:002021-01-07T11:19:00ACTIVECEPE SPERC 5.4.v2Application - industrial - non-spray - indoor use - powderVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile content
Powder coatings 100% non-volatileCovers the whole process* of application of organic solvent borne, water borne liquid and powder coatings by industrial users by low-energy processes.
*Includes: Application
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseINDUSTRIAL_USEINDUSTRIALPC_9aPC_18SU_11SU_12SU_15SU_17SU_16SU_19SU_18SU_7225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)Fluidised bed, emissions captured by cyclone or bag filtersThere is no emission to water during application and drying.There is no deposition to soil from indoor application processes.
OECD ESDFrom packaging waste (OECD ESD powder RMs)Application - industrial – non-spray - indoor use - powderCEPE SPERC 5.4.v2ERC_50.00.080.00.5ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
1000 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 100.0
Binder 100.0
Water 350.0
Organic solvent/coalescent 450.0
Additives 5.0falsetrueEUSES_BIOLOGICAL_STPfalsefalseEUSES_BIOLOGICAL_STP-NONEWATER0.0WASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENTEUSES_DISCHARGE_RATE_OF_EFFLUENTfalsetrue2000.03a947ba9-6c09-4257-aa9e-4dae201fd1e9falsetrue5d8f40e9-8540-4a3a-9d22-7997443a7ef807/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:44:402021-01-07T10:44:40ACTIVECEPE SPERC 2.3a.v2Formulation of powder coatings and inks- non volatilesParticulates
Non-volatilesCovers the whole process of formulation/manufacture of powder coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9a225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)No direct dust emissions to the air are expected.
Initial loss from handling of solid substances is captured by air extraction devices. Emission limits from the EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009 - ESD
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=en]Emissions via equipment cleaning and subsequent discharge to wastewater.
ESDESDESDFormulation of powder coatings – solidsCEPE SPERC 2.3a.v2ERC_20.520.080.04.7ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
101 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 50 000
Binder 50 000
Water 0
Organic solvent/coalescent 0
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of powder coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise losses of particulates. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY – ESD - (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=en] (tables 4.7 & 5.10)falsetrue5d8f40e9-8540-4a3a-9d22-7997443a7ef807/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:27:382021-01-07T11:27:38ACTIVECEPE SPERC 8c.2a.v2Application - professional - brush/roller - indoor use - non volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by professional users by brush or roller.
*Includes: Application of coatings by brush or roller
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falsePROFESSIONAL_WORKER_USEINDUSTRIALPC_9bPC_9aSU_17SU_19SU_18Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
25 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 2.5
Binder 2.5
Water 8.25
Organic solvent/coalescent 11.0
Additives 0.13The solid phase is not emitted to air.Professional applicators tend not to wash equipment.
ESD (Fig 4.2)There is no deposition to soil from indoor application processes.
OECD ESDESD (Fig 4.2)Application - professional - brush/roller - indoor use – solidsCEPE SPERC 8c.2a.v2ERC_8c0.00.00.04.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companyfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:46:562021-01-07T10:46:56ACTIVECEPE SPERC 2.4a.v2Formulation of organic solvent and water borne coatings and inks (where specific formulation not known) - large scale (>1,000 tpa solvent use) – volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Additional specification of product types covered:
Organic solvent borne coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile content
Water borne coatings and inks:
- may contain solvent up to 25 % volatile content.Covers the whole process of formulation/manufacture of organic solvent and water borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9cPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)(total volatiles) EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY – ESD - (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=en] (tables 4.7 & 5.10)ESDESDESD (tables 4.7 & 5.10)Formulation of organic solvent or water borne coatings and inks - large scale (>1,000 tpa solvent use) – volatilesCEPE SPERC 2.4a.v2ERC_20.251.80.00.75ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 75 000
Organic solvent/coalescent 100 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:57:292021-01-07T10:57:29ACTIVECEPE SPERC 4.1a.v2Application - industrial - spraying - indoor use - incineration - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid spray coatings:
- solvent-borne up to 95 % volatile content,
- water-borne coatings,
- liquid solvent-free coatings close to 100 % non-volatile content
Powder coatings 100% non-volatileCovers the whole process* of application of organic solvent borne, water borne liquid and powder coatings by industrial users by spraying.
*Includes:
- Application of coatings by spray
- Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseINDUSTRIAL_USEINDUSTRIALPC_9aPC_18SU_11SU_12SU_15SU_17SU_16SU_19SU_18SU_7225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)For a coating film to form, the volatile phase of organic solvent borne and water borne coatings must evaporate into the atmosphere.
80% solvent inputs emitted through Incinerator with efficiency 99%
No OECD Coatings ESD data – industry dataA proportion of the liquid phase will be present in spray booth scrubber water.There is no deposition to soil from indoor application processes.
OECD ESDPublished literature: Best available techniques reference document (BREF) on Surface treatment using solvents (STS), 2007
Qualitative arguments: Model assumptions explained in background document
Industry data: Available data from reference plants as described in background documentApplication - industrial - spraying - indoor use - incineration - volatilesCEPE SPERC 4.1a.v2ERC_40.020.80.05.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
1000 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 100.0
Binder 100.0
Water 350.0
Organic solvent/coalescent 450.0
Additives 5.0falsetrueEUSES_BIOLOGICAL_STPfalsefalseEUSES_BIOLOGICAL_STP-NONEWATER0.0WASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENTEUSES_DISCHARGE_RATE_OF_EFFLUENTfalsetrue2000.03a947ba9-6c09-4257-aa9e-4dae201fd1e9falsetrue72d88a17-5eee-4f72-87ed-24192215045607/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:07:052021-01-07T11:07:05ACTIVECEPE SPERC 5.2a.v2Application - industrial - spraying - indoor use - powderVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid spray coatings:
- solvent-borne up to 95 % volatile content,
- water-borne coatings,
- liquid solvent-free coatings close to 100 % non-volatile content
Powder coatings 100% non-volatileCovers the whole process* of application of organic solvent borne, water borne liquid and powder coatings by industrial users by spraying.
*Includes:
- Application of coatings by spray
- Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseINDUSTRIAL_USEINDUSTRIALPC_9aPC_18SU_11SU_12SU_15SU_17SU_16SU_19SU_18SU_7225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)A proportion of the solid phase will be contained in overspray.
OECD ESDThere is no emission to water during application and drying. Possible emissions from cleaning processesThere is no deposition to soil from indoor application processes.
OECD ESD3-30%
Published literature: Best available techniques reference document (BREF) on Surface treatment using solvents (STS), 2007, Ch. 6.4.3.2Application - industrial - spraying - indoor use - powderCEPE SPERC 5.2a.v2ERC_51.02.00.030.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
1000 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 100.0
Binder 100.0
Water 350.0
Organic solvent/coalescent 450.0
Additives 5.0falsetrueEUSES_BIOLOGICAL_STPfalsefalseEUSES_BIOLOGICAL_STP-NONEWATER0.0WASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENTEUSES_DISCHARGE_RATE_OF_EFFLUENTfalsetrue2000.03a947ba9-6c09-4257-aa9e-4dae201fd1e9falsetrue5d8f40e9-8540-4a3a-9d22-7997443a7ef807/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:31:062021-01-07T11:31:06ACTIVECEPE SPERC 8d.2a.v2Application - professional - brush/roller - outdoor use - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by professional users by brush or roller.
*Includes: Application of coatings by brush or roller
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falsePROFESSIONAL_WORKER_USEINDUSTRIALPC_9bPC_9aSU_17SU_19SU_18Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
25 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 2.5
Binder 2.5
Water 8.25
Organic solvent/coalescent 11.0
Additives 0.13For a coating film to form, the volatile phase of organic solvent borne and water borne coatings must evaporate into the atmosphere.Professional applicators tend not to wash equipment.
ESD (Fig 4.2)During application of coatings outdoors, a proportion of the applied coating (solid phase) can be deposited on the soil below the area being painted.
No OECD ESD – industry dataESD (Fig 4.2)Application - professional - brush/roller - outdoor use – volatilesCEPE SPERC 8d.2a.v2ERC_8d0.097.50.52.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_OUTDOORWATER_CONTACT_DURING_USEPossible during equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companyfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:36:322021-01-07T10:36:32ACTIVECEPE SPERC 2.2a.v2Formulation of water borne coatings and inks - large scale (>1,000 tpa solvent use) – volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
Solids in polymeric liquids
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Water borne coatings and inks:
- may contain solvent up to 25 % volatile content.Covers the whole process of formulation/manufacture of water borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9cPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)(total volatiles) EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY – ESD - (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=en] (table 5.10)ESDESDESDFormulation of water borne coatings and inks - large scale (>1,000 tpa solvent use) – volatilesCEPE SPERC 2.2a.v2ERC_20.251.10.00.5ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 75 000
Organic solvent/coalescent 10 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:35:012021-01-07T11:35:01ACTIVECEPE SpERC 8f.1a.v2Application - consumer - brush/roller - outdoor use - non volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by consumers by brush or roller.
*Includes: Application of coatings by brush or roller
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseCONSUMER_USEINDUSTRIALPC_9bPC_9aContinuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
5 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 0.5
Binder 0.5
Water 1.50
Organic solvent/coalescent 2.2
Additives 0.03The solid phase is not emitted to air.Application equipment (brushes/rollers/containers/roller trays) can be washed in domestic sinks and washings discharged into public sewers.
OECD ESDDuring application of coatings outdoors, a proportion of the applied coating (solid phase) can be deposited on the soil below the area being painted.
No OECD ESD – industry dataESD (Fig 4.1)Application - consumer - brush/roller - outdoor use – solidsCEPE SPERC 8f.1a.v2ERC_8f1.00.00.525.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_OUTDOORWATER_CONTACT_DURING_USEby equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authorityfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authoritytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:01:412021-01-07T11:01:41ACTIVECEPE SPERC 5.1a.v2Application - industrial - spraying - indoor use - non volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid spray coatings:
- solvent-borne up to 95 % volatile content,
- water-borne coatings,
- liquid solvent-free coatings close to 100 % non-volatile content
Powder coatings 100% non-volatileCovers the whole process* of application of organic solvent borne, water borne liquid and powder coatings by industrial users by spraying.
*Includes:
- Application of coatings by spray
- Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseINDUSTRIAL_USEINDUSTRIALPC_9aPC_18SU_11SU_12SU_15SU_17SU_16SU_19SU_18SU_7225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)A proportion of the solid phase will be contained in overspray.
OECD ESDThere is no emission to water during application and dryingThere is no deposition to soil from indoor application processes.
OECD ESD10 – 52 %, depending on achieved transfer efficiency of spraying (between 30 and 90 %)
Published literature: Best available techniques reference document (BREF) on Surface treatment using solvents (STS), 2007
Qualitative arguments: Model assumptions explained in background document
Industry data: Available data from reference plants as described in background documentApplication - industrial - spraying - indoor use - solidsCEPE SPERC 5.1a.v2ERC_50.01.50.052.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
1000 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 100.0
Binder 100.0
Water 350.0
Organic solvent/coalescent 450.0
Additives 5.0falsetrueEUSES_BIOLOGICAL_STPfalsefalseEUSES_BIOLOGICAL_STP-NONEWATER0.0WASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENTEUSES_DISCHARGE_RATE_OF_EFFLUENTfalsetrue2000.03a947ba9-6c09-4257-aa9e-4dae201fd1e9falsetrue72d88a17-5eee-4f72-87ed-24192215045607/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:33:132021-01-07T10:33:13ACTIVECEPE SPERC 2.1b.v2Formulation of organic solvent borne coatings and inks - small scale (<1,000 tpa solvent use) – volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Additional specification of product types covered:
Organic solvent borne coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process of formulation/manufacture of organic solvent borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)ESD (table 4.4) (total volatiles)ESDESDESD (table 4.4)Formulation of organic solvent borne coatings and inks - small scale (<1,000 tpa solvent use) – volatilesCEPE SPERC 2.1b.v2ERC_20.03.60.01.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 0
Organic solvent/coalescent 100 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:25:232021-01-07T11:25:23ACTIVECEPE SPERC 8a.3a.v2Application - professional - spraying - indoor use - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid spray coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by professional users by spraying.
*Includes: Application of coatings by spray
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falsePROFESSIONAL_WORKER_USEINDUSTRIALPC_9bPC_9aSU_17SU_19SU_18Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
100 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 10.0
Binder 10.0
Water 35.0
Organic solvent/coalescent 45.0
Additives 0.50For a coating film to form, the volatile phase of organic solvent borne and water borne coatings must evaporate into the atmosphere.
A proportion of the solid phase will be contained in overspray.
OECD ESDThere is no emission to water during application and drying
OECD ESDThere is no deposition to soil from indoor application processes.
OECD ESDBased on ESD (Fig 4.2)Application - professional - spraying - indoor use - volatilesCEPE SPERC 8a.3a.v2ERC_8a0.097.00.03.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEPossible by equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companyfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:59:102021-01-07T10:59:10ACTIVECEPE SPERC 4.1b.v2Application - industrial - spraying - indoor use - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid spray coatings:
- solvent-borne up to 95 % volatile content,
- water-borne coatings,
- liquid solvent-free coatings close to 100 % non-volatile content
Powder coatings 100% non-volatileCovers the whole process* of application of organic solvent borne, water borne liquid and powder coatings by industrial users by spraying.
*Includes:
- Application of coatings by spray
- Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseINDUSTRIAL_USEINDUSTRIALPC_9aPC_18SU_11SU_12SU_15SU_17SU_16SU_19SU_18SU_7225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)For a coating film to form, the volatile phase of organic solvent borne and water borne coatings must evaporate into the atmosphere.
OECD Coatings ESDA proportion of the liquid phase will be present in spray booth scrubber water.There is no deposition to soil from indoor application processes.
OECD ESDPublished literature: Best available techniques reference document (BREF) on Surface treatment using solvents (STS), 2007
Qualitative arguments: Model assumptions explained in background document
Industry data: Available data from reference plants as described in background documentApplication - industrial - spraying - indoor use - volatilesCEPE SPERC 4.1b.v2ERC_40.095.00.05.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
1000 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 100.0
Binder 100.0
Water 350.0
Organic solvent/coalescent 450.0
Additives 5.0falsetrueEUSES_BIOLOGICAL_STPfalsefalseEUSES_BIOLOGICAL_STP-NONEWATER0.0WASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENTEUSES_DISCHARGE_RATE_OF_EFFLUENTfalsetrue2000.03a947ba9-6c09-4257-aa9e-4dae201fd1e9falsetrue72d88a17-5eee-4f72-87ed-24192215045607/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:11:322021-01-07T11:11:32ACTIVECEPE SPERC 4.2b.v2Application - industrial - non-spray - indoor use - volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Non-volatile compounds in solid
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings and inks:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile content
Powder coatings 100% non-volatileCovers the whole process* of application of organic solvent borne, water borne liquid and powder coatings by industrial users by low-energy processes.
*Includes: Application
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseINDUSTRIAL_USEINDUSTRIALPC_9aPC_18SU_11SU_12SU_15SU_17SU_16SU_19SU_18SU_7225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)For a coating film to form, the volatile phase of organic solvent borne and water borne coatings must evaporate into the atmosphere.
OECD Coatings ESDOECD Coatings ESD, coil coatingsThere is no deposition to soil from indoor application processes.
OECD ESD1.5-2.5 %
OECD Coatings ESD, flatline furniture/coil coatingsApplication - industrial – non-spray - indoor use - volatilesCEPE SPERC 4.2b.v2ERC_40.097.50.02.5ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
1000 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 100.0
Binder 100.0
Water 350.0
Organic solvent/coalescent 450.0
Additives 5.0falsetrueEUSES_BIOLOGICAL_STPfalsefalseEUSES_BIOLOGICAL_STP-NONEWATER0.0WASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENTEUSES_DISCHARGE_RATE_OF_EFFLUENTfalsetrue2000.03a947ba9-6c09-4257-aa9e-4dae201fd1e9falsetrue72d88a17-5eee-4f72-87ed-241922150456Dec 2019CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:26:282021-01-07T11:26:28ACTIVECEPE SpERC 8c.1a.v2Application - consumer - brush/roller - indoor use - non volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by consumers by brush or roller.
*Includes: Application of coatings by brush or roller
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falseCONSUMER_USEINDUSTRIALPC_9bPC_9aContinuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
5 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 0.5
Binder 0.5
Water 1.50
Organic solvent/coalescent 2.2
Additives 0.03The solid phase is not emitted to air.Application equipment (brushes/rollers/containers/roller trays) can be washed in domestic sinks and washings discharged into public sewers.
OECD ESDThere is no deposition to soil from indoor application processes.
OECD ESDESD (Fig 4.1)Application - consumer - brush/roller - indoor use – solidsCEPE SPERC 8c.1a.v2ERC_8c1.50.00.025.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEby equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authorityfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authoritytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T11:39:162021-01-07T11:39:16ACTIVECEPE SPERC 8f.3a.v2Application - professional - spraying - outdoor use - non volatilesVolatile and non-volatile compounds in liquid mixtures,
solids in polymeric liquids
Intended compounds not classified as carcinogenic or mutagenic, PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Liquid spray coatings:
- solvent-borne up to 95 % volatile content,
- liquid solvent-free coatings close to 100 % non-volatile contentCovers the whole process* of application of organic solvent borne and water borne liquid coatings and inks by professional users by spraying.
*Includes: Application of coatings by spray
Cleaning of equipment
Waste management of coatingshttp://www.cepe.org/reach/falsePROFESSIONAL_WORKER_USEINDUSTRIALPC_9bPC_9aSU_17SU_19SU_18Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)5.5E-6The default parameter can be refined by the registrant based on substance market information or following info below:
Typical maximum daily usage, for any one substance, based on sector knowledge
100 kg product/day at any one location
Substance function Max daily substance use rate in kg/d
Pigment/extender/filler 10.0
Binder 10.0
Water 35.0
Organic solvent/coalescent 45.0
Additives 0.50Based on ESD (Fig 4.2)During application of coatings outdoors, a proportion of the applied coating can be deposited into water
No OECD – industry dataDuring application of coatings outdoors, a proportion of the applied coating (solid phase) can be deposited on the soil below the area being painted.
No OECD ESD –(9-30%) Based on ESD (Fig 4.2 & 8.1)Application - professional - spraying - outdoor use – solidsCEPE SPERC 8f.3a.v2ERC_8f2.00.02.030.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_OUTDOORWATER_CONTACT_DURING_USEPossible by equipment cleaningfalsefalseWATER_CONTACT_DURING_USE_YESEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATIONWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companyfalseWaste water from equipment cleaning discharged to standard municipal sewage treatment plant
Process waste may be recycled or incinerated by local authority or waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT07/01/2021CEPE aisbl0dc7f588-d66d-4c9c-baf7-14ebc2f78be22021-01-07T10:39:122021-01-07T10:39:12ACTIVECEPE SPERC 2.2c.v2Formulation of water borne coatings and inks - non volatilesVolatile organic compounds
Particulates
Volatile and non-volatile compounds in liquid mixtures,
Solids in polymeric liquids
Intended compounds not classified as PBT or vPvB
Volatile compounds rapidly degradable
Water-borne mixtures may contain biocidal agents of product type 2, 6 or 7
Additional specification of product types covered:
Water borne coatings and inks:
- may contain solvent up to 25 % volatile content.Covers the whole process of formulation/manufacture of water borne liquid coatings and inks.http://www.cepe.org/reach/falseFORMULATIONINDUSTRIALPC_9cPC_9bPC_9aPC_18225.0Continuous release: 225 d/y
Typical industry situation (5 working days a week, shut down for vacation, no need for continuous shift)No direct dust emissions to the air are expected.
Initial loss from handling of solid substances is captured by air extraction devices. Emission limits from the ESD (table 5.10)ESDESDESDFormulation of water borne coatings and inks – solidsCEPE SPERC 2.2c.v2ERC_20.250.00970.00.5ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESRELEASE_MODULE_DAILY_USE_AT_SITETypical maximum daily usage, for any one substance, based on sector knowledge
150 000 kg product/day at any one location
Note: in many coatings and inks manufacturing facilities, usage rates will be substantially below the figures shown
Substance function Daily substance use rate in kg/d
Pigment/extender/filler 25 000
Binder 25 000
Water 75 000
Organic solvent/coalescent 10 000
Additives 1 000falsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONProcess waste may be recycled or incinerated by waste disposal companyfalseProcess waste may be recycled or incinerated by waste disposal companytrueWASTE_CONSIDERATION_OTHER_TREATMENT387bc7d0-fd42-4a1a-a9bb-90edff7990a2The formulation/manufacture of liquid coatings and inks is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falsefalse86b8a962-fe08-4595-8038-c74aaf8c722a3a947ba9-6c09-4257-aa9e-4dae201fd1e9Reference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enfalsetruea651f6ea-524d-4598-8461-d4d5bc9dcf3d07/01/2021CEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:13:142020-12-14T15:13:14ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (liquid) - drying/curing</text>
CEPE_SWED_IS_01_v2_L_1Painting process activities requiring enhanced ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_01_v2_L_2CEPE_IS_01_v2falseESCom-10133224648PROC_2W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:18:512020-12-14T15:18:51ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (powder) - spray application</text>
CEPE_SWED_IS_01_v2_P_4Spray application with exhaust ventilationPowder coatingsNO DERMAL EXPOSURE FORESEEN; personnel excluded from spray boothCEPE_IS_01_v2falseESCom-11070000209PROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_VERY_HIGH10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:09:492020-12-14T16:09:49ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (powder) - preparation and cleaning</text>
CEPE_SWED_IS_04_v2_P_3Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_04_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:57:062020-12-14T17:57:06ACTIVE30/11/2020
<text>Digital printing with good room ventilation - waste management</text>
EuPIA_SWED_IS_04_v2_5Printing process activities requiring eye and dermal controlsPrinting inks (liquid)EuPIA_IS_04_v2falseESCom-11070000607PROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:41:402020-12-14T15:41:40ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (liquid) - cleaning inside booth</text>
CEPE_SWED_IS_02_v2_L_5Painting process activities requiring local exhaust ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_02_v2falseESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:39:052020-12-14T16:39:05ACTIVE30/11/2020
<text>Professional spray painting, indoor (without respiratory protective equipment) - drying/curing</text>
CEPE_SWED_PW_03a_v2_1Painting process activities requiring good general ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by PW_03a_v2_2CEPE_PW_03a_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:59:212020-12-14T15:59:21ACTIVE30/11/2020
<text>Industrial spray painting, exhaust ventilation (powder) - preparation and cleaning</text>
CEPE_SWED_IS_03_v2_P_3Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_03_v2falsePreparation of material for application;
Application equipment cleaning outside boothPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:14:222020-12-14T16:14:22ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (liquid) - application</text>
CEPE_SWED_IS_05_v2_L_4Application with exhaust ventilationLiquid coatingsCEPE_IS_05_v2falseESCom-11070000210PROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:16:112020-12-14T16:16:11ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (powder) - drying/curing</text>
CEPE_SWED_IS_05_v2_P_1Painting process activities requiring enhanced ventilationPowder coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_05_v2_P_2CEPE_IS_05_v2falseESCom-10133224648PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:12:262020-12-14T17:12:26ACTIVE30/11/2020
<text>Professional painting, outdoor brush/roller - application brush/roller</text>
CEPE_SWED_PW_06_v2_4Painting process activities with outdoor ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_06_v2falseESCom-11070000207PROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:47:002020-12-14T17:47:00ACTIVE30/11/2020
<text>Printing in an enclosed or extracted process - waste management</text>
EuPIA_SWED_IS_01_v2_5Printing process activities requiring eye and dermal controlsPrinting inks (liquid)EuPIA_IS_01_v2falseESCom-11070000607PROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:56:332020-12-14T17:56:33ACTIVE30/11/2020
<text>Digital printing with good room ventilation - application</text>
EuPIA_SWED_IS_04_v2_4Printing process activities with good general ventilation onlyPrinting inks (liquid)EuPIA_IS_04_v2falseESCom-11070000210PROC_2W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:08:192020-12-14T16:08:19ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (powder) - drying/curing</text>
CEPE_SWED_IS_04_v2_P_1Painting process activities requiring enhanced ventilationPowder coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_04_v2_P_2CEPE_IS_04_v2falseESCom-10133224648PROC_2W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:34:042020-12-14T16:34:04ACTIVE30/11/2020
<text>Professional non-spray painting, near-industrial setting - drying/curing</text>
CEPE_SWED_PW_02_v2_1Painting process activities requiring enhanced ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by PW_02_v2_2CEPE_PW_02_v2falseESCom-10133224648ESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:11:442020-12-14T17:11:44ACTIVE30/11/2020
<text>Professional painting, outdoor brush/roller - preparation and cleaning</text>
CEPE_SWED_PW_06_v2_3Painting process activities with outdoor ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_06_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:12:092020-12-14T16:12:09ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (liquid) - drying/curing</text>
CEPE_SWED_IS_05_v2_L_1Painting process activities requiring enhanced ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_05_v2_L_2CEPE_IS_05_v2falseESCom-10133224648PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:52:082020-12-14T16:52:08ACTIVE30/11/2020
<text>Professional painting, indoor brush/roller - application brush/roller</text>
CEPE_SWED_PW_04_v2_4Painting process activities requiring good general ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_04_v2falseESCom-11070000207PROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:15:272020-12-14T17:15:27ACTIVE30/11/2020
<text>Professional spray painting, outdoor (with respiratory protective equipment) - loading, handling and waste management</text>
CEPE_SWED_PW_05b_v2_2Painting process activities with outdoor ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_05b_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:02:102020-12-14T16:02:10ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (liquid) - drying/curing</text>
CEPE_SWED_IS_04_v2_L_1Painting process activities requiring enhanced ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_04_v2_L_2CEPE_IS_04_v2falseESCom-10133224648PROC_2W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:54:102020-12-14T17:54:10ACTIVE30/11/2020
<text>Printing with good room ventilation - waste management</text>
EuPIA_SWED_IS_03_v2_5Printing process activities requiring eye and dermal controlsPrinting inks (liquid)EuPIA_IS_03_v2falseESCom-11070000607PROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:56:322020-12-14T15:56:32ACTIVE30/11/2020
<text>Industrial spray painting, exhaust ventilation (liquid) - spray application</text>
CEPE_SWED_IS_03_v2_L_4Spray application with exhaust ventilation and respiratory protectionLiquid coatingsCEPE_IS_03_v2falseESCom-11070000209PROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONRespirator conforming to EN 140 with an assigned protection factor of at least 10falseESCom-16012153001ESCom-15193135617trueTRA-WORKER-RESPIRATORY-PROTECTION_RP90TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_VERY_HIGH10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:01:182020-12-14T16:01:18ACTIVE30/11/2020
<text>Industrial spray painting, exhaust ventilation (powder) - spray application</text>
CEPE_SWED_IS_03_v2_P_4Spray application with exhaust ventilation and respiratory protectionPowder coatingsCEPE_IS_03_v2falseESCom-11070000209PROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONRespirator conforming to EN 140 with an assigned protection factor of at least 10falseESCom-16012153001ESCom-15193135617trueTRA-WORKER-RESPIRATORY-PROTECTION_RP90TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:53:282020-12-14T17:53:28ACTIVE30/11/2020
<text>Printing with good room ventilation - application</text>
EuPIA_SWED_IS_03_v2_4Printing process activities requiring good ventilation, eye and dermal controlsPrinting inks (liquid)EuPIA_IS_03_v2falseESCom-11070000210PROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:39:502020-12-14T16:39:50ACTIVE30/11/2020
<text>Professional spray painting, indoor (without respiratory protective equipment) - loading, handling and waste management</text>
CEPE_SWED_PW_03a_v2_2Painting process activities requiring good general ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_03a_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:55:592020-12-14T16:55:59ACTIVE30/11/2020
<text>Professional spray painting, outdoor (without respiratory protective equipment) - spray application</text>
CEPE_SWED_PW_05a_v2_4Painting process activities with outdoor ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_05a_v2falseESCom-11070000206PROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:10:242020-12-14T16:10:24ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (powder) - application</text>
CEPE_SWED_IS_04_v2_P_4Application with exhaust ventilationPowder coatingsNO DERMAL EXPOSURE FORESEEN; personnel excluded from application zoneCEPE_IS_04_v2falseESCom-11070000210PROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:20:132020-12-14T16:20:13ACTIVE30/11/2020
<text>Professional spray painting, near-industrial setting - drying/curing</text>
CEPE_SWED_PW_01_v2_1Painting process activities requiring enhanced ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by PW_01_v2_2CEPE_PW_01_v2falseESCom-10133224648ESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:10:512020-12-14T17:10:51ACTIVE30/11/2020
<text>Professional painting, outdoor brush/roller - loading, handling and waste management</text>
CEPE_SWED_PW_06_v2_2Painting process activities with outdoor ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_06_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:13:432020-12-14T16:13:43ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (liquid) - preparation and cleaning</text>
CEPE_SWED_IS_05_v2_L_3Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_05_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:20:482020-12-14T16:20:48ACTIVE30/11/2020
<text>Professional spray painting, near-industrial setting - loading, handling and waste management</text>
CEPE_SWED_PW_01_v2_2Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_01_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:58:152020-12-14T15:58:15ACTIVE30/11/2020
<text>Industrial spray painting, exhaust ventilation (powder) - loading, handling and waste management</text>
CEPE_SWED_IS_03_v2_P_2Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_03_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:59:362020-12-14T16:59:36ACTIVE30/11/2020
<text>Professional painting, outdoor brush/roller - drying/curing</text>
CEPE_SWED_PW_06_v2_1Painting process activities with outdoor ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by PW_06_v2_2CEPE_PW_06_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:09:022020-12-14T16:09:02ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (powder) - loading, handling and waste management</text>
CEPE_SWED_IS_04_v2_P_2Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_04_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:18:142020-12-14T15:18:14ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (powder) - preparation and cleaning</text>
CEPE_SWED_IS_01_v2_P_3Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_01_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:50:452020-12-14T16:50:45ACTIVE30/11/2020
<text>Professional painting, indoor brush/roller - loading, handling and waste management</text>
CEPE_SWED_PW_04_v2_2Painting process activities requiring good general ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_04_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:51:132020-12-14T17:51:13ACTIVE30/11/2020
<text>Printing with good room ventilation - drying/curing</text>
EuPIA_SWED_IS_03_v2_1Printing process activities with good general ventilation onlyPrinting inks (liquid)NO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_03_v2_2EuPIA_IS_03_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:52:522020-12-14T16:52:52ACTIVE30/11/2020
<text>Professional spray painting, outdoor (without respiratory protective equipment) - drying/curing</text>
CEPE_SWED_PW_05a_v2_1Painting process activities with outdoor ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by PW_05a_v2_2CEPE_PW_05a_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:58:552020-12-14T16:58:55ACTIVE30/11/2020
<text>Professional spray painting, outdoor (with respiratory protective equipment) - spray application</text>
CEPE_SWED_PW_05b_v2_4Painting process activities with outdoor ventilation, respiratory protection, eye and dermal controlsLiquid coatingsCEPE_PW_05b_v2falseESCom-11070000206PROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONRespirator conforming to EN 140 with an assigned protection factor of at least 10falseESCom-15193135617ESCom-16012153001trueTRA-WORKER-RESPIRATORY-PROTECTION_RP90TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:43:092020-12-14T15:43:09ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (powder) - loading, handling and waste management</text>
CEPE_SWED_IS_02_v2_P_2Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_02_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:49:532020-12-14T16:49:53ACTIVE30/11/2020
<text>Professional painting, indoor brush/roller - drying/curing</text>
CEPE_SWED_PW_04_v2_1Painting process activities requiring good general ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by PW_04_v2_2CEPE_PW_04_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:54:432020-12-14T17:54:43ACTIVE30/11/2020
<text>Digital printing with good room ventilation - drying/curing</text>
EuPIA_SWED_IS_04_v2_1Printing process activities with good general ventilation onlyPrinting inks (liquid)NO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_04_v2_4EuPIA_IS_04_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:46:242020-12-14T17:46:24ACTIVE30/11/2020
<text>Printing in an enclosed or extracted process - application</text>
EuPIA_SWED_IS_01_v2_4Printing process activities requiring local exhaust ventilation, eye and dermal controls (preparation, cleaning and application)Printing inks (liquid)EuPIA_IS_01_v2falseESCom-11070000210PROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:18:052020-12-14T16:18:05ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (powder) - preparation and cleaning</text>
CEPE_SWED_IS_05_v2_P_3Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_05_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:43:092020-12-14T17:43:09ACTIVE30/11/2020
<text>Printing in an enclosed or extracted process - loading and handling</text>
EuPIA_SWED_IS_01_v2_2Printing process activities requiring local exhaust ventilation, eye and dermal controls (loading and handling)Printing inks (liquid)EuPIA_IS_01_v2falseLoading of application equipment and handling of printed material
before curingPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_VERY_HIGH10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:20:082020-12-14T15:20:08ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (liquid) - drying/curing</text>
CEPE_SWED_IS_02_v2_L_1Painting process activities requiring enhanced ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_02_v2_L_2CEPE_IS_02_v2falseESCom-10133224648PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:17:262020-12-14T15:17:26ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (powder) - loading, handling and waste management</text>
CEPE_SWED_IS_01_v2_P_2Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_01_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:19:322020-12-14T15:19:32ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (powder) - cleaning inside booth</text>
CEPE_SWED_IS_01_v2_P_5Painting process activities requiring local exhaust ventilation, eye and dermal controlsPowder coatingsCEPE_IS_01_v2falseESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:30:112020-12-14T16:30:11ACTIVE30/11/2020
<text>Professional spray painting, near-industrial setting - preparation and cleaning</text>
CEPE_SWED_PW_01_v2_3Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_01_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:06:102020-12-14T16:06:10ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (liquid) - application</text>
CEPE_SWED_IS_04_v2_L_4aApplication with exhaust ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; personnel excluded from application zoneCEPE_IS_04_v2falseESCom-11070000210PROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:15:152020-12-14T16:15:15ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (liquid) - application</text>
CEPE_SWED_IS_05_v2_L_4aApplication with exhaust ventilationLiquid coatingsCEPE_IS_05_v2falseESCom-11070000210PROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:15:092020-12-14T15:15:09ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (liquid) - spray application</text>
CEPE_SWED_IS_01_v2_L_4Spray application with exhaust ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; personnel excluded from spray boothCEPE_IS_01_v2falseESCom-11070000209PROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_VERY_HIGH10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:48:262020-12-14T16:48:26ACTIVE30/11/2020
<text>Professional spray painting, indoor (with respiratory protective equipment) - preparation and cleaning</text>
CEPE_SWED_PW_03b_v2_3Painting process activities requiring good general ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_03b_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:56:012020-12-14T17:56:01ACTIVE30/11/2020
<text>Digital printing with good room ventilation - preparation and cleaning</text>
EuPIA_SWED_IS_04_v2_3Printing process activities requiring good ventilation, eye and dermal controlsPrinting inks (liquid)EuPIA_IS_04_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:45:302020-12-14T15:45:30ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (powder) - cleaning inside booth</text>
CEPE_SWED_IS_02_v2_P_5Painting process activities requiring local exhaust ventilation, eye and dermal controlsPowder coatingsCEPE_IS_02_v2falseESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:42:302020-12-14T17:42:30ACTIVE30/11/2020
<text>Printing in an enclosed or extracted process - drying/curing</text>
EuPIA_SWED_IS_01_v2_1Printing process activities requiring local exhaust ventilationPrinting inks (liquid)NO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_01_v2_3EuPIA_IS_01_v2falseESCom-10133224648PROC_2W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:49:042020-12-14T17:49:04ACTIVE30/11/2020
<text>Printing with enhanced room ventilation - preparation and cleaning</text>
EuPIA_SWED_IS_02_v2_3Printing process activities requiring enhanced ventilation, eye and dermal controlsPrinting inks (liquid)EuPIA_IS_02_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:52:182020-12-14T17:52:18ACTIVE30/11/2020
<text>Printing with good room ventilation - loading and handling</text>
EuPIA_SWED_IS_03_v2_2Printing process activities requiring good ventilation, eye and dermal controlsPrinting inks (liquid)EuPIA_IS_03_v2falseLoading of application equipment and handling of printed material
before curingPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:44:062020-12-14T15:44:06ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (powder) - preparation and cleaning</text>
CEPE_SWED_IS_02_v2_P_3Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_02_v2falseESCom-10133224595ESCom-10133224645PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:38:172020-12-14T16:38:17ACTIVE30/11/2020
<text>Professional non-spray painting, near-industrial setting - application brush/roller</text>
CEPE_SWED_PW_02_v2_4Application with exhaust ventilation and respiratory protectionLiquid coatingsCEPE_PW_02_v2falseESCom-11070000207PROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONRespirator conforming to EN 140 with an assigned protection factor of at least 10falseESCom-16012153001ESCom-15193135617trueTRA-WORKER-RESPIRATORY-PROTECTION_RP90TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_HOODS10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:18:432020-12-14T16:18:43ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (powder) - application</text>
CEPE_SWED_IS_05_v2_P_4Application with exhaust ventilationPowder coatingsCEPE_IS_05_v2falseESCom-11070000210PROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:48:182020-12-14T17:48:18ACTIVE30/11/2020
<text>Printing with enhanced room ventilation - loading and handling</text>
EuPIA_SWED_IS_02_v2_2Printing process activities requiring enhanced ventilation, eye and dermal controlsPrinting inks (liquid)EuPIA_IS_02_v2falseLoading of application equipment and handling of printed material
before curingPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:58:172020-12-14T16:58:17ACTIVE30/11/2020
<text>Professional spray painting, outdoor (with respiratory protective equipment) - preparation and cleaning</text>
CEPE_SWED_PW_05b_v2_3Painting process activities with outdoor ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_05b_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:15:442020-12-14T15:15:44ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (liquid) - cleaning inside booth</text>
CEPE_SWED_IS_01_v2_L_5Painting process activities requiring local exhaust ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_01_v2falseESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:47:392020-12-14T17:47:39ACTIVE30/11/2020
<text>Printing with enhanced room ventilation - drying/curing</text>
EuPIA_SWED_IS_02_v2_1Printing process activities requiring enhanced ventilationPrinting inks (liquid)NO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_02_v2_2EuPIA_IS_02_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:47:052020-12-14T15:47:05ACTIVE30/11/2020
<text>Industrial spray painting, exhaust ventilation (liquid) - drying/curing</text>
CEPE_SWED_IS_03_v2_L_1Painting process activities requiring enhanced ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_03_v2_L_2CEPE_IS_03_v3falseESCom-10133224648PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:39:592020-12-14T15:39:59ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (liquid) - preparation and cleaning</text>
CEPE_SWED_IS_02_v2_L_3Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_02_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:45:182020-12-14T16:45:18ACTIVE30/11/2020
<text>Professional spray painting, indoor (without respiratory protective equipment) - preparation and cleaning</text>
CEPE_SWED_PW_03a_v2_3Painting process activities requiring good general ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_03a_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:03:592020-12-14T16:03:59ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (liquid) - preparation and cleaning</text>
CEPE_SWED_IS_04_v2_L_3Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_04_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:57:332020-12-14T15:57:33ACTIVE30/11/2020
<text>Industrial spray painting, exhaust ventilation (powder) - drying/curing</text>
CEPE_SWED_IS_03_v2_P_1Painting process activities requiring enhanced ventilationPowder coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_03_v2_P_2CEPE_IS_03_v2falseESCom-10133224648PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:14:392020-12-14T15:14:39ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (liquid) - preparation and cleaning</text>
CEPE_SWED_IS_01_v2_L_3Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_01_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:55:312020-12-14T16:55:31ACTIVE30/11/2020
<text>Professional spray painting, outdoor (without respiratory protective equipment) - preparation and cleaning</text>
CEPE_SWED_PW_05a_v2_3Painting process activities with outdoor ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_05a_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:07:032020-12-14T16:07:03ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (liquid) - cleaning inside booth</text>
CEPE_SWED_IS_04_v2_L_5Painting process activities requiring local exhaust ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_04_v2falseESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:45:512020-12-14T16:45:51ACTIVE30/11/2020
<text>Professional spray painting, indoor (without respiratory protective equipment) - spray application</text>
CEPE_SWED_PW_03a_v2_4Painting process activities requiring good general ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_03a_v2falseESCom-11070000206PROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:33:252020-12-14T16:33:25ACTIVE30/11/2020
<text>Professional spray painting, near-industrial setting - spray application</text>
CEPE_SWED_PW_01_v2_4Spray application with exhaust ventilation and respiratory protectionLiquid coatingsCEPE_PW_01_v2falseESCom-11070000206PROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONRespirator conforming to EN 140 with an assigned protection factor of at least 10falseESCom-16012153001ESCom-15193135617trueTRA-WORKER-RESPIRATORY-PROTECTION_RP90TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_HOODS10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:50:032020-12-14T17:50:03ACTIVE30/11/2020
<text>Printing with enhanced room ventilation - application</text>
EuPIA_SWED_IS_02_v2_4Printing process activities requiring enhanced ventilation, eye and dermal controlsPrinting inks (liquid)EuPIA_IS_02_v2falseESCom-11070000210PROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:43:452020-12-14T17:43:45ACTIVE30/11/2020
<text>Printing in an enclosed or extracted process - preparation and cleaning</text>
EuPIA_SWED_IS_01_v2_3Printing process activities requiring local exhaust ventilation, eye and dermal controls (preparation, cleaning and application)Printing inks (liquid)EuPIA_IS_01_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:53:432020-12-14T16:53:43ACTIVE30/11/2020
<text>Professional spray painting, outdoor (without respiratory protective equipment) - loading, handling and waste management</text>
CEPE_SWED_PW_05a_v2_2Painting process activities with outdoor ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_05a_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:12:532020-12-14T16:12:53ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (liquid) - loading, handling and waste management</text>
CEPE_SWED_IS_05_v2_L_2Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_05_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:34:502020-12-14T16:34:50ACTIVE30/11/2020
<text>Professional non-spray painting, near-industrial setting - loading, handling and waste management</text>
CEPE_SWED_PW_02_v2_2Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_02_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:14:062020-12-14T15:14:06ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (liquid) - loading, handling and waste management</text>
CEPE_SWED_IS_01_v2_L_2Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_01_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO20/10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:17:122020-12-14T16:17:12ACTIVE30/11/2020
<text>Industrial non-spray painting, exhaust ventilation (powder) - loading, handling and waste management</text>
CEPE_SWED_IS_05_v2_P_2Painting process activities requiring enhanced ventilation, eye and dermal controlsPowder coatingsCEPE_IS_05_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:56:422020-12-14T16:56:42ACTIVE30/11/2020
<text>Professional spray painting, outdoor (with respiratory protective equipment) - drying/curing</text>
CEPE_SWED_PW_05b_v2_1Painting process activities with outdoor ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by PW_05b_v2_2CEPE_PW_05b_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsefalseTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:51:282020-12-14T16:51:28ACTIVE30/11/2020
<text>Professional painting, indoor brush/roller - preparation and cleaning</text>
CEPE_SWED_PW_04_v2_3Painting process activities requiring good general ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_04_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:44:442020-12-14T15:44:44ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (powder) - spray application</text>
CEPE_SWED_IS_02_v2_P_4Spray application with exhaust ventilation and respiratory protectionPowder coatingsCEPE_IS_02_v2falseESCom-11070000209PROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalseUse compressed-air breathing apparatus to EN 14594 with an assigned protection factor of at least 20; Wear suitable respiratory protectiontrueTRA-WORKER-RESPIRATORY-PROTECTION_RP95TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_VERY_HIGH10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:11:082020-12-14T16:11:08ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (powder) - cleaning inside booth</text>
CEPE_SWED_IS_04_v2_P_5Painting process activities requiring local exhaust ventilation, eye and dermal controlsPowder coatingsCEPE_IS_04_v2falseESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:02:532020-12-14T16:02:53ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (liquid) - loading, handling and waste management</text>
CEPE_SWED_IS_04_v2_L_2Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_04_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:16:422020-12-14T15:16:42ACTIVE30/11/2020
<text>Industrial spray painting, automated booth (powder) - drying/curing</text>
CEPE_SWED_IS_01_v2_P_1Painting process activities requiring enhanced ventilationPowder coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_01_v2_P_2CEPE_IS_01_v2falseESCom-10133224648PROC_2W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:04:482020-12-14T16:04:48ACTIVE30/11/2020
<text>Industrial non-spray painting, automated booth (liquid) - application</text>
CEPE_SWED_IS_04_v2_L_4Application with exhaust ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; personnel excluded from application zoneCEPE_IS_04_v2falseESCom-11070000210PROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_FIXED_HOOD10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:40:442020-12-14T15:40:44ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (liquid) - spray application</text>
CEPE_SWED_IS_02_v2_L_4Spray application with exhaust ventilation and respiratory protectionLiquid coatingsCEPE_IS_02_v2falseESCom-11070000209PROC_7W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalseUse cmpressed-air breathing apparatus to EN 14594 with an assigned protection factor of at least 20; Wear suitable respiratory protectiontrueTRA-WORKER-RESPIRATORY-PROTECTION_RP95TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION_VERY_HIGH10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:50:422020-12-14T17:50:42ACTIVE30/11/2020
<text>Printing with enhanced room ventilation - waste management</text>
EuPIA_SWED_IS_02_v2_5Printing process activities requiring eye and dermal controlsPrinting inks (liquid)EuPIA_IS_02_v2falseESCom-11070000607PROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T17:52:542020-12-14T17:52:54ACTIVE30/11/2020
<text>Printing with good room ventilation - preparation and cleaning</text>
EuPIA_SWED_IS_03_v2_3Printing process activities requiring good ventilation, eye and dermal controlsPrinting inks (liquid)EuPIA_IS_03_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:39:182020-12-14T15:39:18ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (liquid) - loading, handling and waste management</text>
CEPE_SWED_IS_02_v2_L_2Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_02_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:47:002020-12-14T16:47:00ACTIVE30/11/2020
<text>Professional spray painting, indoor (with respiratory protective equipment) - drying/curing</text>
CEPE_SWED_PW_03b_v2_1Painting process activities requiring good general ventilationLiquid coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by PW_03b_v2_2CEPE_PW_03b_v2falseESCom-10133224644PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:49:062020-12-14T16:49:06ACTIVE30/11/2020
<text>Professional spray painting, indoor (with respiratory protective equipment) - spray application</text>
CEPE_SWED_PW_03b_v2_4Painting process activities requiring good general ventilation, respiratory protection, eye and dermal controlsLiquid coatingsCEPE_PW_03b_v2falseESCom-11070000206PROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONRespirator conforming to EN 140 with an assigned protection factor of at least 10falseESCom-16012153001ESCom-15193135617trueTRA-WORKER-RESPIRATORY-PROTECTION_RP90TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:37:282020-12-14T16:37:28ACTIVE30/11/2020
<text>Professional non-spray painting, near-industrial setting - preparation and cleaning</text>
CEPE_SWED_PW_02_v2_3Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_02_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T16:47:362020-12-14T16:47:36ACTIVE30/11/2020
<text>Professional spray painting, indoor (with respiratory protective equipment) - loading, handling and waste management</text>
CEPE_SWED_PW_03b_v2_2Painting process activities requiring good general ventilation, eye and dermal controlsLiquid coatingsCEPE_PW_03b_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0USE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsefalseTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE80TRA-WORKER-GENERAL_VENTILATIONOpen doors/windowsfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:48:502020-12-14T15:48:50ACTIVE30/11/2020
<text>Industrial spray painting, exhaust ventilation (liquid) - preparation and cleaning</text>
CEPE_SWED_IS_03_v2_L_3Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_03_v2falseESCom-10133224645ESCom-10133224595PROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:42:242020-12-14T15:42:24ACTIVE30/11/2020
<text>Industrial spray painting, walk-in booth (powder) - drying/curing</text>
CEPE_SWED_IS_02_v2_P_1Painting process activities requiring enhanced ventilationPowder coatingsNO DERMAL EXPOSURE FORESEEN; any handling would be covered by IS_02_v2_P_2CEPE_IS_02_v2falseESCom-10133224648PROC_4W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-11133171336trueW_PHYSICAL_FORM_OF_PRODUCT-SOLID_HIGHDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsefalseUSE_EYE_PROTECTION-NOTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsefalseTRA-WORKER-DERMAL-PROTECTION_NOTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE - SWED migration653d7a7e-b82d-42f2-8aae-68b1b998a6442020-12-14T15:48:022020-12-14T15:48:02ACTIVE30/11/2020
<text>Industrial spray painting, exhaust ventilation (liquid) - loading, handling and waste management</text>
CEPE_SWED_IS_03_v2_L_2Painting process activities requiring enhanced ventilation, eye and dermal controlsLiquid coatingsCEPE_IS_03_v2falseLoading of application equipment and handling of coated parts before curing;
Waste managementPROC_8bW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalseESCom-9268175004trueW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREambient temperaturefalsetrue40.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalsetrueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-INDUSTRIALUSE_EYE_PROTECTIONfalsetrueUSE_EYE_PROTECTION-YESTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90TRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASIC-ENHANCEDTRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NO10/2020falseCEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32019-04-02T09:20:182019-04-02T09:22:43ACTIVEENVIRONMENTProcess efficiencyfalseAIRSOILWATERE_W_3E_C_3maximise the efficiency of use of input raw materials through the highest conversion into formulated productstrueThe process is arranged to maximise the efficiency of use of input raw materials through the highest conversion into formulated products. Process losses are reduced to the absolute minimum through use of general and manufacturing plant extraction to maintain workplace concentrations of airborne VOCs and particulates below respective OELs; and through use of closed or covered manufacturing equipment, wherever possible, to minimise evaporative losses of VOCs. The composition of products and the overall process are such that there are no discharges of raw materials or products to waste-water or to soil from the manufacturing plant.falseCEPE aisbl4c91e47d-07a3-4b36-9687-2f94334ccbb32019-04-04T09:07:222019-04-04T09:07:22ACTIVEENVIRONMENTfalseAIRE_W_3E_C_4Installation controlled under IED– abatement or use of solvent management plan (95-97% efficiency)trueReference for RMM Efficiency (air): Total emission limits from the Industrial Emissions Directive – IED - (2010/75/EU)
[http://eur-lex.europa.eu/legal-content/EN/TXT/?qid=1501849273822&uri=CELEX:32010L0075 and corrigendum]
Individual organic solvents
CEPE expert decision based on EMISSION SCENARIO DOCUMENT ON COATINGS INDUSTRY (PAINTS, LACQUERS AND VARNISHES), OECD, July 2009
[http://www.oecd.org/officialdocuments/displaydocumentpdf?cote=ENV/JM/MONO(2009)24&doclanguage=enInstallation controlled under IED– abatement or use of solvent management plan (95-97% efficiency)trueSmaller users (see IED) – none Larger users (see IED)– abatement or use of solvent management planfalseSmaller users (see IED) – none
Larger users (see IED)– abatement or use of solvent management plantrueNonefalsefalseCyclone and bag filters (efficiency 99%)falseCyclone and bag filters (efficiency 99%)trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4EUSES 2.1.2YestruefalseNofalseESCom-11133170644trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSTRA Consumer condition of usetrueDERMALINHALATIONORALC_1ConsExpo100.00.0100.0<=ESCom-9269144102ESCom-11133171519trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_2TRA Worker 3.08.00.024.0<=ESCom-15193135624ESCom-11133171521trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTtrueAIRSOILWATERE_W_6E_C_4IndoorfalseESCom-9313213237trueOutdoorfalseESCom-9313213238trueIndoor/OutdoorfalseESCom-10133220202trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4E_C_4EUSES 2.1.2StandardtrueESCom-11133170613trueWATER0.0100.0Site specificfalseESCom-11133171638trueWATER0.0100.0NonefalsefalseWATER0.00.00.0ChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_6EUSES 2.1.22000.00.0>=ESCom-11133170818Assumed effluent discharge flow from site ${qualifier} ${value} ${unit}trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4EUSES 2.1.22000.00.0>=ESCom-11133170818ESCom-10133222104trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_5TRA Worker 3.040.00.0<=ESCom-9269144108ESCom-12355002161trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2EUSES 2.1.20.0<=ESCom-11133170824ESCom-10076084404trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2EUSES 2.1.20.0<=ESCom-15193135620ESCom-10076084403trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2E_C_2EUSES 2.1.20.0<=ESCom-15193135620falseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueDERMALW_4ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGNotruefalseYes (effectiveness ≥ 80%)falseESCom-10133224896ESCom-17297180800ESCom-12355002165trueChemical resistant dermal protection with basic employee training. (effectiveness ≥ 90%)falseESCom-11133171457ESCom-17297180800ESCom-12355002165trueChemical resistant dermal protection with specific employee training. (effectiveness ≥ 95%)falseESCom-11133171458ESCom-17297180800ESCom-12355002165trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueINHALATIONW_3ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGBasic (up to 3 ACH)truefalseGood (3 to 5 ACH)falseESCom-11133171363trueEnhanced (5 to 10 ACH)falseESCom-12355002164trueSpecialised (10 to 30 ACH)falseESCom-20149115700trueSpecialised (more than 30 ACH)falseESCom-20149115800trueDown-flow spray roomfalseESCom-20149120100trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueDERMALINHALATIONW_3ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGNotruefalseYes, basic LEV such as canopy hood, movable capturing hood or other multi-purpose LEV (assumed effectiveness 50-80%)falseProvide basic LEV such as canopy hood, movable capturing hood or other multipurpose LEV. Ensure effectiveness is at least 50%.trueYes, specifically designed LEV such as receiving hoods (assumed effectiveness ≥ 80-90%)falseProvide specifically designed and maintained LEV (receiving hood type). Ensure effectiveness is at least 80%.trueYes, specifically designed fixed capturing hood, on tool extraction or enclosing hoods (assumed effectiveness ≥ 90-95%)falseProvide specifically designed and maintained LEV (fixed capturing hood type, on-tool extraction or enclosing hood type). Ensure effectiveness is at least 90%.trueYes, enclosing hood with very high effectiveness such as fume cupboard (assumed effectiveness ≥ 95%)falseProvide enclosing hood with very high effectiveness (such as fume cupboard) or effective ventilation by spray booth according to EN 16985. Ensure effectiveness is at least 95%.trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueDERMALINHALATIONW_3ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGAdvancedfalseESCom-17297180701ESCom-11133170477ESCom-9267230103ESCom-20149153500trueBasicfalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueINHALATIONW_5ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGIndoortrueESCom-9313213237trueOutdoorfalseESCom-9313213238trueIndoor (Room 100-1000 m3)falseCovers room volume ≥ 100 m3trueIndoor (Room > 1000 m3)falseCovers room volume > 1000 m3trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueINHALATIONW_4ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGNotruefalseYes (APF ≥ 10)falseWear a respirator which reduces the air impurities by at least a factor of 10 (APF ≥ 10). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 20)falseWear a respirator which reduces the air impurities by at least a factor of 20 (APF ≥ 20). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 4)falseWear a respirator which reduces the air impurities by at least a factor of 4 (APF ≥ 4). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 5)falseWear a respirator which reduces the air impurities by at least a factor of 5 (APF ≥ 5). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 40)falseWear a respirator which reduces the air impurities by at least a factor of 40 (APF ≥ 40). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 200)falseWear a respirator which reduces the air impurities by at least a factor of 200 (APF ≥ 200). For further specification, refer to section 8 of the SDStrueYes (APF ≥ 2000)falseWear a respirator which reduces the air impurities by at least a factor of 2000 (APF ≥ 2000). For further specification, refer to section 8 of the SDStrueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueDERMALORALC_3TRA Consumer 3.1;ConsExpoAdultfalsefalseChildfalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSTRA Consumer condition of usetrueINHALATIONC_2TRA Consumer 3.0;TRA Consumer 3.1;ConsExpo0.0<=ESCom-11133170819ESCom-11133171520trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSsurface of the skin exposed to the contact with the substance and identified uniquely by a selected body part.trueDERMALC_4TRA Consumer 3.0;TRA Consumer 3.1FingertipsfalseESCom-12355002180trueTwo fingertipsfalseAssumes that potential dermal contact is limited to two fingertipstruePalm of one handfalseAssumes that potential dermal contact is limited to palm of one handtrueInside hands / one hand / palm of handsfalseESCom-12355002181trueHandsfalseESCom-12355002182trueHands and forearmsfalseESCom-12355002183trueUpper part of the bodyfalseESCom-12355002184trueLower part of the bodyfalseESCom-12355002185trueWhole body except feet, hands and headfalseESCom-12355002186trueWhole bodyfalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSFraction of substance transferred (>0 to 1) from the product/article contact layer (layer assumed to be in interaction with the skin) to the skintrueDERMALC_4TRA Consumer 3.0;TRA Consumer 3.11.00.01.0=falseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSAssumed duration of exposure per use event.trueINHALATIONC_2TRA Consumer 3.0;TRA Consumer 3.10.024.0=ESCom-15193135758ESCom-11133170461trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueDERMALC_1TRA Consumer 3.1YestruefalseNo dermal contactfalseAssumes no dermal contacttrueDermal exposure assumed to be negligiblefalseDermal exposure assumed to be negligibletrueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueINHALATIONC_1TRA Consumer 3.1YestruefalseInhalation exposure is considered to be not relevant falseESCom-12355002171trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueORALC_1TRA Consumer 3.1YestruefalseOral exposure is considered to be not relevant falseESCom-12355002172trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSNumber of use events per day.trueDERMALINHALATIONORALC_2TRA Consumer 3.0;TRA Consumer 3.1;ConsExpo1.01.0=ESCom-12355002188ESCom-11133171521trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueDERMALINHALATIONORALC_2TRA Consumer 3.1;ConsExpoFrequenttruefalseInfrequentfalseCovers infrequent uses, up to 2 weeks per yeartrueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSRepresents the fraction of product that is released to air during a consumer use: a factor of 0.05 would be the ITF in a case where 5% of a substance is released to air during a consumer use.trueINHALATIONC_4TRA Consumer 3.11.00.01.0=falseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERStrueINHALATIONC_3TRA Consumer 3.1IndoortruefalseOutdoorfalseESCom-9313213238trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVECONSUMERSConditions of use that implies the substance to be entirely released to air during the application.trueINHALATIONC_1TRA Consumer 3.0;TRA Consumer 3.1YesfalsefalseNotrueESCom-10133224609trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b5ACTIVEWORKERSCore worker condition of usetrueEYEW_4ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGEye protectionfalseESCom-11133171467trueNotruefalseFace protection/visorfalseESCom-11133170516trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTSpecific conditions during the waste life stage of the substance potentially going beyond the local or national legal requirements for waste treatment (disposal or recovery) operations. The determinant values either provide i) a generic justification why no particular considerations regarding environmental risks from the waste life stage are needed or ii) indicate particular conditions to be met during waste treatment. For both assessment cases the single registrant can edit justification/conditions if the generic determinant values do not cover his case.trueWATERE_W_5E_C_3EUSES 2.1.2No (no waste)falseNo waste generated.ESCom-11133170674trueNo (low risk)falseERC based assessment demonstrating control of risk with default conditions. Low risk assumed for waste life stage. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (low amount)falseParticular risks from waste treatment unlikely due to small fraction of used substance entering into the waste stage. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (low concentration)falseParticular risks from waste treatment unlikely due low concentration of substance in waste stream. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (other reason)falseWaste disposal according to national/local legislation is sufficient. "Explanation for the CSR" to be reported by each registrant:ESCom-11133171479trueDedicated recollection infrastructure requiredfalseESCom-12355002107trueBiological treatment not appropriatefalseESCom-12355002101trueIncineration not appropriatefalseESCom-12355002100truePrevent formation of hazardous break down products during thermal waste treatment destruction.falsePrevent formation of hazardous break down products during thermal waste treatment.trueClosed system required to minimise release to the environment.falseClosed system required to minimise release to the environment during waste treatment.trueOtherfalse"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b5ACTIVEENVIRONMENTtrueWATERE_W_6E_C_4YesfalsefalseNofalseESCom-16354140700trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_1100.00.0100.0<=ESCom-9269144102ESCom-11133171519trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSCore worker condition of usetrueDERMALINHALATIONW_1ECETOC TRA worker;ART;MEASE;Stoffenmanager;EMKGGasfalseESCom-9313213340trueLiquefied gasfalseESCom-11137200300trueLiquid, including paste/slurry/suspensionfalseESCom-9268175004trueSolid (material with high dustiness)falseESCom-9268175006ESCom-20149164100trueSolid (material with medium dustiness)falseESCom-9268175006ESCom-20149164000trueSolid (material with no or very low dustiness)falseESCom-9268175006ESCom-20149163800trueMolten metalfalseESCom-20149135400trueSolid objectfalseESCom-15193135772trueSolid (material with low dustiness)falseESCom-9268175006ESCom-20149163900trueSolid (material with very high dustiness)falseESCom-9268175006ESCom-20149164200trueDaily amount per sitetruetruetrueAnnual amount per sitetruetruetrueIndoor or outdoor usefalsefalsefalseAssumed domestic sewage treatment plant flowtruetruetrueSprayingfalsefalsefalseCleaningfalsefalsefalseNo sprayingfalsefalsefalseFilm formation - air dryingfalsefalsefalsePreparation of material for applicationfalsefalsefalseFilm formation - force drying, stoving and other technologiesfalsefalsefalseWear suitable gloves tested to EN374.falsefalsefalsePlasters and floor equalizersfalsefalsefalseProfessional application of coatings and inks by sprayingfalsefalsefalseProfessional application of coatings and inks by brush or rollerfalsefalsefalseIndustrial application of coatings and inks by sprayingfalsefalsefalseIndustrial application of coatings and inks by other than sprayingfalsefalsefalsePowdersfalsefalsefalseSolidsfalsefalsefalseWaste managementfalsefalsefalseBrush or rollerfalsefalsefalseVolatilefalsefalsefalseExposure durationtruetruetrueEnsure regular inspection, cleaning and maintenance of equipment and machines.falsefalsefalseWear suitable face shield.falsefalsefalseMunicipal sewage treatment plant is assumed.falsefalsefalseNo application of sewage sludge to soilfalsefalsefalseNo waste from processfalsefalsefalsem3/dayfalsefalsefalseg/eventfalsefalsefalsetonnes/yearfalsefalsefalseCovers daily exposures up to 8 hoursfalsefalsefalseSolid, high dustinessfalsefalsefalseProvide a good standard of general ventilation (not less than 3 to 5 air changes per hour).falsefalsefalseWear chemically resistant gloves (tested to EN374) in combination with ‘basic’ employee training.falsefalsefalseWear chemically resistant gloves (tested to EN374) in combination with specific activity training.falsefalsefalseUse suitable eye protection.falsefalsefalseDispose of waste product or used containers according to local regulations.falsefalsefalseCovers concentrations up tofalsetruetrueFor each use event, covers use amounts up tofalsetruetrueCovers use up tofalsetruetrueFillers and puttyfalsefalsefalseProvide onsite wastewater treatment.falsefalsefalseLiquefied gasfalsefalsefalseIncineration is not appropriate for waste.falsefalsefalseBiological treatment is not appropriate for waste.falsefalsefalseDedicated recollection infrastructure required for wastefalsefalsefalseAssumes process temperature up tofalsetruetrueProvide a good standard of controlled ventilation (5 to 10 air changes per hour).falsefalsefalseFor further specification, refer to section 8 of the SDS.falsefalsefalseInhalation exposure is considered to be not relevant.falsefalsefalseOral exposure is considered to be not relevant.falsefalsefalseAssumes that potential dermal contact is limited to fingertips.falsefalsefalseAssumes that potential dermal contact is limited to inside hands / one hand / palm of hands.falsefalsefalseAssumes that potential dermal contact is limited to hands.falsefalsefalseAssumes that potential dermal contact is limited to hands and forearms.falsefalsefalseAssumes that potential dermal contact is limited to upper part of the body.falsefalsefalseAssumes that potential dermal contact is limited to lower part of the body.falsefalsefalseAssumes that potential dermal contact excludes feet, hands and head.falsefalsefalseevents per dayfalsefalsefalseWear a respirator conforming to EN140.falsefalsefalsetonnes/dayfalsefalsefalseh/dayfalsefalsefalseh/eventfalsefalsefalseMassive objectfalsefalsefalseWear suitable respiratory protection.falsefalsefalseNo water contact during use.falsefalsefalseAssumes that activities are undertaken with appropriate and well maintained equipment by trained personnel operating under supervision.falsefalsefalseIf skin contamination is expected to extend to other parts of the body, then these body parts should also be protected with impervious garments in a manner equivalent to those described for the hands.falsefalsefalseProvide specialised room ventilation (at least 10 air changes per hour).falsefalsefalseProvide specialised room ventilation (at least 30 air changes per hour).falsefalsefalseProvide down-flow spray room.falsefalsefalseMolten inorganic substancesfalsefalsefalseEnsure daily cleaning of the equipment.falsefalsefalseVery low dustiness: Handling the product does not result in dust emission without intentional breakage of products. For example, granules covered with a layer of wax.falsefalsefalseLow dustiness: Handling the product does not result in a visible dust cloud. For example, animal pellets.falsefalsefalseMedium dustiness: Handling the product in its dry form results in a dust cloud that settles quickly due to gravity. For example, sand.falsefalsefalseHigh dustiness: Handling the product in its dry form results in a dust cloud that is clearly visible for some time. For example, talcum powder.falsefalsefalseVery high dustiness: Handling the product in its dry form results in a dust cloud that remains airborne for a long time.falsefalsefalseClear spills immediately.falsefalsefalseConsumerfalsefalsefalseIndustrialfalsefalsefalseProfessionalfalsefalsefalseIncinerationfalsefalsefalseLiquidfalsefalsefalseSolidfalsefalsefalse%falsefalsefalse°CfalsefalsefalseApplicationfalsefalsefalseIndoor usefalsefalsefalseOutdoor usefalsefalsefalseGaseousfalsefalsefalseAerosolfalsefalsefalse