EFCC UseMap Version 2, February 2018Assessment of worker:
- Percentage of substance in mixture: No specification regarding concentration of substance in mixture by the DU sector. The risk assessor using this SWED should indicate the maximum concentration for the relevant substance considering this SWED.
- Depending on the physical form of the substance the relevant contributing activity - CA (SWED) for liquid or powder material shall be selected. The possibility of a powder dispersed in liquids should be considered as well. For substances in powder form both SWEDs (for liquids and powders) should be considered.
- Generally all “levels (I, II and III)” should be assessed and communicated with their related maximum safe concentration. Depending on the hazard profile of the substance those “levels” will be omitted, for which safe use cannot be proven.
- The SWEDs are primarily designed to be used with tier 1 models (e.g. ECETOC TRA or Chesar) and the relevant parameters are described in section 2 of the SWED. More detailed conditions of use are provided in section 3 for use in tier 2 models (e.g. ART) in case a tier 2 assessment is required due to the hazard profile of the substance. Where the tier 2 model requires input that cannot be derived from the SWED a worst case assumption (or default if any) shall be made. When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Assessment of environment.
- The assessor is recommended to consult the EFCC/FEICA SPERC background document.
- Depending on the volatility of the substance the relevant contributing activity CA (SPERC) for volatile or non-volatile material shall be selected.
- Whether "subsequent service life" is relevant depends on substance properties. Therefore the individual assessor who uses the UseMap has to decide based on the relevant substance properties if "subsequent service life" is relevant.FEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32017-12-13T17:28:362017-12-14T12:27:46ACTIVEOct 2017FEICA / EFCC SPERC 2.2b.v3Formulation of Water-borne Adhesives / Sealants and Construction Chemical Products – non-volatile SubstancesIncludes substances which do not evaporate to a significant extent during formulation of the adhesive. Non-volatile ingredients are defined by a boiling point threshold of >250°C.storing, mixing, packaging, filling of substances (as part of preparations) and equipment cleaning, maintenance and associated laboratory activitieswww.feica.eufalseFORMULATIONINDUSTRIALPC_1PC_9bPC_9aSU_0300.0FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsTolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)OECD 2009, OECD Environment, Health and Safety Publications Series on Emission Scenario Documents No. 20, EMISSION SCENARIO DOCUMENT ON ADHESIVE FORMULATION, Paris 2009.Formulation of Water-borne Adhesives / Sealants and Construction Chemical Products – non-volatile SubstancesFEICA / EFCC SPERC 2.2b.v3ERC_20.5050.00970.00.2RELEASE_MODULE_DAILY_USE_AT_SITEThe indicative worst case substance use rate (MSPERC) for main ingredients types and guidance can be found in background documentation.
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsfalsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONEquipment cleaned with water, washing disposed of with wastewaterfalseEquipment cleaned with water, washing disposed of with wastewatertrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESd3901f5c-ec0d-4370-b581-065c72ba5461falsetruefb93337d-c15d-4f5e-b49f-f799e97d3d10c22afc18-6782-448d-9942-7c5b506d8589The manufacture of adhesive chemicals is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products.falsetrue35e9828e-f724-43f0-92ee-ac44fa264436b16d7479-ec5a-4c76-8a8d-186845963578falsetrue3502c6ac-69e3-40ab-ac66-83e91f49edb8c0a45fee-bb0f-4db2-a33c-592d3a0eec5efalsetruecb42f459-f732-4ac0-8a12-a55944ba1f3fOct 2017FEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32017-12-13T17:30:322017-12-13T17:30:32ACTIVEOct 2017FEICA / EFCC SPERC 2.3a.v1Non-volatile Substances for the Formulation of Cementitious Construction Chemical Products and Tile AdhesivesIncludes all substances which do not evaporate to a significant extent during formulation of the construction chemical. Non-volatile ingredients are defined by a boiling point threshold of >250°C.Storing, mixing, packaging, filling of substances (as part of preparations) and equipment cleaning, maintenance and associated laboratory activitieswww.feica.eufalseFORMULATIONINDUSTRIALPC_1PC_0PC_9bSU_0300.0EFCC expert assessmentsee background document
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives, sealants and construction chemical productsNon-volatile Substances for the Formulation of Cementitious Construction Chemical Products and Tile AdhesivesFEICA / EFCC SPERC 2.3a.v1ERC_20.00.0050.00.0ENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_NORELEASE_MODULE_DAILY_USE_AT_SITEThe indicative worst case substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives, sealants and construction chemical productsfalsetrueEUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATEREUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0APPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION• Equipment is dry cleaned (sweeping, vacuum cleaning, etc.)
• Solid waste is recovered in production wherever possiblefalse• Equipment is dry cleaned (sweeping, vacuum cleaning, etc.)
• Solid waste is recovered in production wherever possibletrueWASTE_CONSIDERATION_OTHER_TREATMENTc22afc18-6782-448d-9942-7c5b506d8589The process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products. The manufacture of construction chemicals is a multi-stage batch process. Typical measures may include e.g.
- Closed batch systems and / or
- Semi-closed transfer system and/or
- Reduced number of transfer and cleaning operations through e.g. dedicated storage tanks for raw materials, premixes and final productsfalseThe process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products. The manufacture of construction chemicals is a multi-stage batch process. Typical measures may include e.g.
- Closed batch systems and / or
- Semi-closed transfer system and/or
- Reduced number of transfer and cleaning operations through e.g. dedicated storage tanks for raw materials, premixes and final productstrue7aeaaf0f-98ca-4e75-b131-37807e0bcd13a6bd8edd-2a2c-4495-8eb1-89753d930dd1falsetrueca394e7c-f065-4582-9b0d-05d5fd239722fdce39ef-2564-4e48-a176-3ae872e4d4abAir extraction systems with dust filters during transfer and formulation of powder raw materials and products (e.g. cyclones, fabric filter, wet scrubber, electrostatic precipitators (ESP)).falseAir extraction systems with dust filters during transfer and formulation of powder raw materials and products (e.g. cyclones, fabric filter, wet scrubber, electrostatic precipitators (ESP)).true7488e2be-c8da-4188-9aca-b0c33cbd48afAIR99.0Oct 2017FEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32018-03-16T12:06:392018-03-16T12:06:39ACTIVEMarch 2018FEICA / EFCC SPERC 8d.1a.v2Widespread use of volatile substances in adhesives / sealants and construction chemical products - outdoorSubstance types / functions / properties included or excluded: Includes volatile ingredients which evaporate to a significant extent upon curing of the product. Volatile substances are defined by a boiling point threshold of <= 250°C.
Additional specification of product types covered: Covers the application of adhesives, sealants and construction chemicals for a wide range of purposes by consumers and by professional uses.Adhesives and sealants are applied between two substrates. Upon application curing takes place either via a chemical reaction or via evaporation of a solvent. Construction chemicals cover the uses applied to buildings, their trim and fittings and construction purposes.
Key processes may include: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities. Roller application or brushing, spraying (non-industrial), extrusion from a cartridge, dipping and pouring of articleswww.feica.eufalsePROFESSIONAL_WORKER_USEINDUSTRIALPC_1PC_9bPC_9aSU_195.5E-6The value of the Fraction of Regional tonnage used locally is identical to the default settings of the REACH Guidance (0.002).
The respective value needs to be defined by the registrant based on his intelligence of the market of the substance.
365 emission dayssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productsWidespread use of volatile substances in adhesive/sealants and construction chemical products - outdoorFEICA / EFCC SPERC 8d.1a.v2ERC_8d1.598.00.02.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATION• Residues of products must be cured in the container before discarded via household waste.
• Larger solvent washing volumes are collected and disposed of as solvent waste.falseResidues of products must be cured in the container before discarded via household waste. Larger solvent washing volumes are collected and disposed of as solvent waste.trueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_OUTDOORd3901f5c-ec0d-4370-b581-065c72ba5461falsetrue89e72dbb-26cc-4fa8-b3ed-938b535c4c18c22afc18-6782-448d-9942-7c5b506d8589falsetrue670a7e48-bed5-4f5b-a3f9-0b3d3129522eca52dffe-af80-4945-8fad-f2e3c943f9bdfalsetrue3958a7f8-bc78-4bed-9a0c-85951b35bc3303b1c4bb-34e9-41fd-bfb4-9cfbd42356aefalsetruecf4ab4a0-f543-4382-adc6-d776117fa64dMarch 2018Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-03-23T11:38:462018-03-23T11:38:46ACTIVEMarch 2018EFCC SPERC 8c.1a.v2Widespread use of non-volatile substances in construction chemical products - indoorSubstance types / functions / properties included or excluded: Includes all ingredients which do not evaporate to a significant extent upon curing of the product. Non-volatile ingredients are defined by a boiling point threshold of >250°C.
Additional specification of product types covered: Covers the application of construction chemicals for a wide range of purposes by consumers and by professional uses.Covers applications of construction chemicals to buildings, their trim and fittings and construction purposes. Key processes are: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities. Roller application or brushing, spraying (non-industrial), dipping and pouring of articlefalsePROFESSIONAL_WORKER_USEINDUSTRIALPC_1PC_9bPC_9aSU_195.5E-6The value of the Fraction of Regional tonnage used locally is identical to the default settings of the REACH Guidance (0.002).
The respective value needs to be defined by the registrant based on his intelligence of the market of the substance.
365 emission dayssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productsWidespread use of non-volatile substances in construction chemical products - indoorEFCC SPERC 8c.1a.v2ERC_8c1.50.00.04.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATION- Residues of products must be cured in the container before discarded via household waste.
- Larger solvent washing volumes are collected and disposed of as solvent waste.falseResidues of products must be cured in the container before discarded via household waste. Larger solvent washing volumes are collected and disposed of as solvent waste.trueWASTE_CONSIDERATION_OTHER_TREATMENTWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORd3901f5c-ec0d-4370-b581-065c72ba5461falsetrue89e72dbb-26cc-4fa8-b3ed-938b535c4c18c22afc18-6782-448d-9942-7c5b506d8589falsetrue670a7e48-bed5-4f5b-a3f9-0b3d3129522eca52dffe-af80-4945-8fad-f2e3c943f9bdfalsetrue3958a7f8-bc78-4bed-9a0c-85951b35bc33bd7221b7-8963-40d7-80eb-3a877c2de3d0falsetrued7185717-6cb0-4fa2-981e-0aaf0081d863March 2018Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T16:22:082018-02-09T16:22:08ACTIVEFEICA / EFCC SPERC 2.1c.v3Formulation of Solvent-borne and Solvent-less Adhesives / Sealants and Construction Chemical Products– volatile Substances (Small Scale, < 1500 t/a of products)Includes solvents which evaporate to a significant extent upon curing of the adhesives. Volatile ingredients are defined by a boiling point threshold of <=250°C.storing, mixing, packaging, filling of substances (as part of preparations) and equipment cleaning, maintenance and associated laboratory activities; Solvent based processwww.feica.eufalseFORMULATIONINDUSTRIALPC_1PC_9bPC_9aSU_0300.0FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsTolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)OECD 2009, OECD Environment, Health and Safety Publications Series on Emission Scenario Documents No. 20, EMISSION SCENARIO DOCUMENT ON ADHESIVE FORMULATION, Paris 2009.Formulation of Solvent-borne and Solvent-less Adhesives / Sealants and Construction Chemical Products– volatile Substances (Small Scale, < 1500 t/a of products)FEICA / EFCC SPERC 2.1c.v3ERC_20.03.60.00.2RELEASE_MODULE_DAILY_USE_AT_SITEThe indicative worst case substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsfalsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION• Equipment cleaned with organic solvent, washings are collected and disposed of as solvent waste.false• Equipment cleaned with organic solvent, washings are collected and disposed of as solvent waste.trueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_NOd3901f5c-ec0d-4370-b581-065c72ba5461falsetruefb93337d-c15d-4f5e-b49f-f799e97d3d10c22afc18-6782-448d-9942-7c5b506d8589The manufacture of adhesive chemicals is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products.falsetrue35e9828e-f724-43f0-92ee-ac44fa264436b16d7479-ec5a-4c76-8a8d-186845963578falsetrue9259023d-55b5-4995-a84a-51d77cb2e3ccOct 2017Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T16:20:312018-02-09T16:20:31ACTIVEFEICA / EFCC SPERC 2.1b.v3Formulation of Solvent-borne and Solvent-less Adhesives / Sealants and Construction Chemical Products – volatile Substances (Large Scale, > 1500 t/a of products)Includes solvents which evaporate to a significant extent upon curing of the adhesives. Volatiles are defined by a boiling point threshold of <=250°C.storing, mixing, packaging, filling of substances (as part of preparations) and equipment cleaning, maintenance and associated laboratory activitieswww.feica.eufalseFORMULATIONINDUSTRIALPC_1PC_9bPC_9aSU_0300.0FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsTolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)OECD 2009, OECD Environment, Health and Safety Publications Series on Emission Scenario Documents No. 20, EMISSION SCENARIO DOCUMENT ON ADHESIVE FORMULATION, Paris 2009.Formulation of Solvent-borne and Solvent-less Adhesives / Sealants and Construction Chemical Products – volatile Substances (Large Scale, > 1500 t/a of products)FEICA / EFCC SPERC 2.1b.v3ERC_20.00.360.00.2RELEASE_MODULE_DAILY_USE_AT_SITEThe indicative worst case substance use rate (MSPERC) and guidance for refinement can be found in background documentation.
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical products.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATION• Equipment cleaned with organic solvent, washings are collected and disposed of as solvent waste.
• Vapor recovery (adsorption) or other technique for reducing volatiles emissions (incineration, thermal oxidation)false• Equipment cleaned with organic solvent, washings are collected and disposed of as solvent waste.
• Vapor recovery (adsorption) or other technique for reducing volatiles emissions (incineration, thermal oxidation)trueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_NOd3901f5c-ec0d-4370-b581-065c72ba5461falsetruefb93337d-c15d-4f5e-b49f-f799e97d3d10c22afc18-6782-448d-9942-7c5b506d8589The manufacture of adhesive chemicals is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products.falsetrue35e9828e-f724-43f0-92ee-ac44fa264436b16d7479-ec5a-4c76-8a8d-186845963578falsetrue9259023d-55b5-4995-a84a-51d77cb2e3cc21c5cd45-b23b-46d3-800e-41bc4ca92e1efalsetrued66a148d-79e8-47fa-aaad-49b7b60639057bcccf7e-0f96-4bf7-b5c7-c4cf1c7f42c7falsetruea6bd5d75-dc9b-4734-8ce0-2af8a19b9431AIR80.0FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsOct 2017FEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32017-12-13T17:27:062017-12-14T12:26:25ACTIVEOct 2017FEICA / EFCC SPERC 2.2a.v3Formulation of Water-borne Adhesives / Sealants and Construction Chemical Products – Volatile SubstancesIncludes solvents which evaporate to a significant extent upon curing of the adhesives. Volatile ingredients are defined by a boiling point threshold of <=250°C.storing, mixing, packaging, filling of substances (as part of preparations) and equipment cleaning, maintenance and associated laboratory activitieswww.feica.eufalseFORMULATIONINDUSTRIALPC_1PC_9bPC_9aSU_0300.0FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsTolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)OECD 2009, OECD Environment, Health and Safety Publications Series on Emission Scenario Documents No. 20, EMISSION SCENARIO DOCUMENT ON ADHESIVE FORMULATION, Paris 2009.Formulation of Water-borne Adhesives / Sealants and Construction Chemical Products – Volatile SubstancesFEICA / EFCC SPERC 2.2a.v3ERC_20.52.250.00.2RELEASE_MODULE_DAILY_USE_AT_SITEThe indicative worst case substance use rate (MSPERC) for several ingredient types and guidance for refinement can be found in background documentation.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONEquipment cleaned with water, washing disposed of with wastewaterfalseEquipment cleaned with water, washing disposed of with wastewatertrueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESd3901f5c-ec0d-4370-b581-065c72ba5461falsetruefb93337d-c15d-4f5e-b49f-f799e97d3d10c22afc18-6782-448d-9942-7c5b506d8589The manufacture of adhesive chemicals is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products.falsetrue35e9828e-f724-43f0-92ee-ac44fa264436b16d7479-ec5a-4c76-8a8d-186845963578falsetrue361e30d8-b9b7-46b8-a5ed-ed6878cb4e54Oct 2017Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-03-23T11:41:422018-03-23T11:41:42ACTIVEMarch 2018EFCC SPERC 8a.1a.v2Widespread use of volatile substances in construction chemical products - indoorSubstance types / functions / properties included or excluded: Includes volatile ingredients which evaporate to a significant extent upon curing of the product. Volatile substances are defined by a boiling point threshold of <=250°C.
Additional specification of product types covered: Covers the application of construction chemicals for a wide range of purposes by consumers and by professional uses.Description of activities/processes: Covers applications of construction chemicals to buildings, their trim and fittings and construction purposes. Key processes are: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities. Roller application or brushing, spraying (non-industrial), dipping and pouring of articlefalsePROFESSIONAL_WORKER_USEINDUSTRIALPC_1PC_9bPC_9aSU_195.5E-6The value of the Fraction of Regional tonnage used locally is identical to the default settings of the REACH Guidance (0.002).
The respective value needs to be defined by the registrant based on his intelligence of the market of the substance.
365 emission dayssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productsWidespread use of volatile substances in construction chemical products - indoorEFCC SPERC 8a.1a.v2ERC_8a1.598.00.02.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATION- Residues of products must be cured in the container before discarded via household waste.
- Larger solvent washing volumes are collected and disposed of as solvent waste.falseResidues of products must be cured in the container before discarded via household waste. Larger solvent washing volumes are collected and disposed of as solvent waste.trueWASTE_CONSIDERATION_OTHER_TREATMENTWATER_CONTACT_DURING_USEfalsefalseWATER_CONTACT_DURING_USE_YESENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORd3901f5c-ec0d-4370-b581-065c72ba5461falsetrue89e72dbb-26cc-4fa8-b3ed-938b535c4c18c22afc18-6782-448d-9942-7c5b506d8589falsetrue670a7e48-bed5-4f5b-a3f9-0b3d3129522eca52dffe-af80-4945-8fad-f2e3c943f9bdfalsetrue3958a7f8-bc78-4bed-9a0c-85951b35bc3303b1c4bb-34e9-41fd-bfb4-9cfbd42356aefalsetruecf4ab4a0-f543-4382-adc6-d776117fa64dMarch 2018FEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32018-03-16T12:21:142018-03-16T12:21:14ACTIVEMarch 2018FEICA / EFCC SPERC 8f.1a.v2Widespread use of non-volatile substances in adhesives / sealants and construction chemical products - outdoorSubstance types / functions / properties included or excluded: Includes all ingredients which do not evaporate to a significant extent upon curing of the product. Non-volatile substances are defined by a boiling point threshold of >250°C.
Additional specification of product types covered: Covers the application of adhesives, sealants and construction chemicals for a wide range of purposes by consumers and by professional uses.Adhesives and sealants are applied between two substrates. Upon application curing takes place either via a chemical reaction or via evaporation of a solvent. Construction chemicals cover the uses applied to buildings, their trim and fittings and construction purposes.
Key processes may include: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities. Roller application or brushing, spraying (non-industrial), extrusion from a cartridge, dipping and pouring of articles.www.feica.eufalsePROFESSIONAL_WORKER_USEINDUSTRIALPC_1PC_9bPC_9aSU_195.5E-6The value of the Fraction of Regional tonnage used locally is identical to the default settings of the REACH Guidance (0.002).
The respective value needs to be defined by the registrant based on his intelligence of the market of the substance.
365 emission dayssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productssee background document
FEICA / EFCC (2017): Specific Environmental Release Categories (SPERCs) for the wide spread use of adhesives, sealants and construction chemical productsWidespread use of non-volatile substances in adhesives/sealants and construction chemical products - outdoorFEICA / EFCC SPERC 8f.1a.v2ERC_8f1.50.00.04.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERWASTE_TREATMENT_CONSIDERATION• Residues of products must be cured in the container before discarded via household waste.
• Larger solvent washing volumes are collected and disposed of as solvent waste.falseResidues of products must be cured in the container before discarded via household waste. Larger solvent washing volumes are collected and disposed of as solvent waste.trueWASTE_CONSIDERATION_OTHER_TREATMENTENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_OUTDOORd3901f5c-ec0d-4370-b581-065c72ba5461falsetrue89e72dbb-26cc-4fa8-b3ed-938b535c4c18c22afc18-6782-448d-9942-7c5b506d8589falsetrue670a7e48-bed5-4f5b-a3f9-0b3d3129522eca52dffe-af80-4945-8fad-f2e3c943f9bdfalsetrue3958a7f8-bc78-4bed-9a0c-85951b35bc33bd7221b7-8963-40d7-80eb-3a877c2de3d0falsetrued7185717-6cb0-4fa2-981e-0aaf0081d863March 2018Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T15:52:382018-02-09T15:52:38ACTIVEFEICA / EFCC SPERC 2.1a.v3Formulation of Solvent-borne and Solvent-less Adhesives / Sealants and Construction Chemical Products - non-volatile SubstancesIncludes substances other than solvents which do not evaporate to a significant extent during formulation of the adhesive. Non-volatile ingredients are defined by a boiling point threshold of >250°C.storing, mixing, packaging, filling of substances (as part of preparations) and equipment cleaning, maintenance and associated laboratory activitieswww.feica.eufalseFORMULATIONINDUSTRIALPC_1PC_9bPC_9aSU_0300.0FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsTolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)Tolls et al. 2016. Estimating emissions from adhesives/sealants uses and manufacturing for use in environmental risk assessment. Intergr Environ Assess Manag, (Jan, 2016)OECD 2009, OECD Environment, Health and Safety Publications Series on Emission Scenario Documents No. 20, EMISSION SCENARIO DOCUMENT ON ADHESIVE FORMULATION, Paris 2009.Formulation of Solvent-borne and Solvent-less Adhesives / Sealants and Construction Chemical Products - non-volatile SubstancesFEICA / EFCC SPERC 2.1a.v3ERC_20.020.080.00.2RELEASE_MODULE_DAILY_USE_AT_SITEThe indicative worst case use rate values (MSPERC) for individual ingredient types and guidance for refinement can be found in background documentation.
FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical products.falsetrueEUSES_DISCHARGE_RATE_OF_STPfalsetrue2000.0EUSES_BIOLOGICAL_STPfalsetrueEUSES_BIOLOGICAL_STP-STANDARDWATERAPPLICATION_OF_THE_STPfalsefalseAPPLICATION_OF_THE_STP-YESWASTE_TREATMENT_CONSIDERATIONEquipment cleaned with organic solvent, washings are collected and disposed of as solvent wastefalseEquipment cleaned with organic solvent, washings are collected and disposed of as solvent wastetrueWASTE_CONSIDERATION_OTHER_TREATMENTWATER_CONTACT_DURING_USEfalsetrueWATER_CONTACT_DURING_USE_NOENVIRONMENT_PLACE_OF_USEfalsetrueENVIRONMENT_PLACE_OF_USE_INDOORd3901f5c-ec0d-4370-b581-065c72ba5461falsetruefb93337d-c15d-4f5e-b49f-f799e97d3d10c22afc18-6782-448d-9942-7c5b506d8589The manufacture of adhesive chemicals is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products.falsetrue35e9828e-f724-43f0-92ee-ac44fa264436b16d7479-ec5a-4c76-8a8d-186845963578falsetrue3502c6ac-69e3-40ab-ac66-83e91f49edb8c0a45fee-bb0f-4db2-a33c-592d3a0eec5efalsetruecb42f459-f732-4ac0-8a12-a55944ba1f3fOct 2017Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-06T14:48:452017-12-19T09:29:42ACTIVE30/09/17small-scale use,
roller or brushing application,
indoor, liquid, level IEFCC_SWED_PW_S_li_10_i_I_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II or III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_S_li_10_i_I_v2falsesmall-scale use,
roller or brushing application,
indoor, liquid, level IPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (< 100kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-07T12:14:242017-12-19T08:48:16ACTIVE30/09/17large-scale use,
pouring application,
indoor, liquid, level IEFCC_SWED_PW_L_li_13_i_I_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_L_li_13_i_I_v2falselarge-scale use,
pouring application,
indoor, liquid, level IPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (ca. 50 - 1000 kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:12:002018-02-09T17:23:00ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
indoor, powder, level IEFCC_SWED_PW_p_8a_i_I_v2For multi component systems, the liquid components are poured or scraped into the mixing pail and mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous before the powder component is added. Typical quantity per transfer activity: 10-50 kg. indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher level II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of powders, granules or pelletised material
Activity subclass: Falling of powders, granules or pelletised materialEFCC_SUMI_PW_p_8a_i_I_v2falseTransfer of mixtures at non-dedicated facilities,
indoor, powder, level IPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTapplies to powder substances only, dustiness according to evaluated substancefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_UNSPECIFIEDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONdust mask P2falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb8fe4215a-d760-46af-ac66-beb8b36d6302falsetruebf735df4-3b17-4949-a95d-a76b2892427d01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb61b9fc15e-e89b-4703-966f-c3e4aec308c9falsetrue6afaad5d-8608-4340-81a0-b02cfde25d2c8d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:28:172018-02-09T17:28:17ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
indoor, liquid, level IIEFCC_SWED_PW_li_8a_i_II_v2For two- or multi component systems, the remaining components are poured or scraped into the mixing pail. The mixed material is poured into another pail and mixed as described for another minute. Typical quantity per transfer activity: 10-50 kg. indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient. If level II itself is not sufficient level III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of liquid products
Activity subclass: Falling liquidsEFCC_SUMI_PW_li_8a_i_II_v2falseTransfer of mixtures at non-dedicated facilities,
indoor, liquid, level IIPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171355true1.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdebc7bfaa29-524e-412f-8f0a-edb015dcf1a5"Type of transfer:
free falling transfer from bucket to bucket with a drop height of ca. 0.5 m at a rate of 10 - 100 l/min"falsetrue4d5d8c98-6735-4f21-a798-e6eb392f567601b068d5-06c6-426d-90c0-885667b1a711Effective housekeepingfalsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:31:432018-02-09T17:31:43ACTIVE30/09/17large-scale use,
roller or brushing application,
indoor, liquid, level IIEFCC_SWED_PW_L_li_10_i_II_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient. If level II itself is not sufficient level III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_L_li_10_i_II_v2falselarge-scale use,
roller or brushing application,
indoor, liquid, level IIPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (> 100kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-28T14:35:342017-12-19T08:45:17ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
outdoor, liquid, level IEFCC_SWED_PW_li_8a_o_I_v2For two- or multi component systems, the remaining components are poured or scraped into the mixing pail. The mixed material is poured into another pail. Typical quantity per transfer activity: 10-50 kg. outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of liquid products
Activity subclass: Falling liquidsEFCC_SUMI_PW_li_8a_o_I_v2falseTransfer of mixtures at non-dedicated facilities,
outdoor, liquid, level IPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18e08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdebc7bfaa29-524e-412f-8f0a-edb015dcf1a5"Type of transfer:
free falling transfer from bucket to bucket with a drop height of ca. 0.5 m at a rate of 10 - 100 l/min"falsetrue4d5d8c98-6735-4f21-a798-e6eb392f567601b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-07T11:13:062017-12-19T09:32:55ACTIVE30/09/17spray application (high energy),
indoor, liquid, level IEFCC_SWED_PW_li_11_i_I_v2The mixed material is poured into the spraying equipment (airless) and sprayed onto the surface through a handheld nozzle, workers standing upright, indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II or III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spray application of liquids
activity subclass: surface spraying of liquidsEFCC_SUMI_PW_li_11_i_I_v2falsespray application (high energy),
indoor, liquid, level IPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfilter mask APF 10falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgoggles or maskfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb64740f443-8bde-4f62-94cf-1ea8de374570falseSpraying in any direction (including upwards)true7e3e4293-1d8d-4100-ac58-35004ce631d4f404fa98-c954-4125-bc44-ec1f1759c514"Amount of product applied:
from small to > 3l/min (ca. 5kg/min)"falsefalsef793828f-837f-4455-88cb-3b60f72e6e46e141a3ed-982e-47ca-9e57-e1478a18c43efalsetrue5b0da094-41db-4b8f-8664-3d33e1b8191f69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-22T09:17:432017-12-19T09:03:28ACTIVE30/09/17mixing, indoor, liquid,
level IEFCC_SWED_PW_li_5_i_I_v2Liquid products/components are mixed prior to use by means of a suitable tool driven by a low-speed drill (max. 300 rpm) for approx. 3 minutes or until homogeneous. For two- or multi component systems, the remaining components are poured or scraped into the mixing pail and mixed as described for another 3 minutes or until homogenous. Typical quantity per mixing activity: 10-50 kg. indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Activities with open liquid surfaces or open reservoirs
Activity subclass: Activities with agitated surfacesEFCC_SUMI_PW_li_5_i_I_v2falsemixing, indoor, liquid,
level IPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possible;
if ART is used, low viscosity like water should be selectedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONOperational buildings or new construction with average ventilation; Closed windows; Confined spaces are not covered by this SWED.falsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb63c7a29e5-55ec-423e-a4c7-eb2cebfb1139Product is mixed in pails, which can be transported and handled manually with a diameter of ca. 40cm.falsetrue10608e6d-969f-4250-b4af-6be00e93c4908d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:33:182018-02-09T17:33:18ACTIVE30/09/17small-scale use,
pouring application,
indoor, liquid, level IIEFCC_SWED_PW_S_li_13_i_II_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient. If level II itself is not sufficient level III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_S_li_13_i_II_v2falsesmall-scale use,
pouring application,
indoor, liquid, level IIPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (ca. 10 - 50 kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:27:342018-02-09T17:27:34ACTIVE30/09/17mixing, indoor, powder,
level IIEFCC_SWED_PW_p_5_i_II_v2The liquid component (water or mixing liquid) is poured into a mixing vessel and the powder product is added. For multi component systems, the liquid components are poured or scraped into the mixing pail and mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous before the powder component is added. The components are mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous. Alternatively, compulsory mixers may be used if appropriate. Typical quantity per mixing activity: 10-50 kg. indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Movement and agitation of powders, granules or pelletised material
Activity subclass: no activity subclass
mixing or blending in large bucketsEFCC_SUMI_PW_p_5_i_II_v2falsemixing, indoor, powder,
level IIPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTURENo specification regarding concentration of substance in mixture by the DU sector. The risk assessor using this SWED should indicate the maximum concentration for the relevant substance considering this SWED.falsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTapplies to powder substances only, dustiness according to evaluated substancefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_UNSPECIFIEDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONdust mask P2falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb6691ed19a-ebd3-4b19-b034-7731f5e6bff4falsetrue84bb68af-6052-415b-968e-ab6e58b850a68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-28T14:50:082017-12-19T08:38:14ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
indoor, liquid, level IEFCC_SWED_PW_li_8a_i_I_v2For two- or multi component systems, the remaining components are poured or scraped into the mixing pail. The mixed material is poured into another pail and mixed as described for another minute. Typical quantity per transfer activity: 10-50 kg. indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II or III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of liquid products
Activity subclass: Falling liquidsEFCC_SUMI_PW_li_8a_i_I_v2falseTransfer of mixtures at non-dedicated facilities,
indoor, liquid, level IPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdebc7bfaa29-524e-412f-8f0a-edb015dcf1a5Type of transfer:
free falling transfer from bucket to bucket with a drop height of ca. 0.5 m at a rate of 10 - 100 l/minfalsetrue4d5d8c98-6735-4f21-a798-e6eb392f567601b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-07T11:55:402017-12-19T08:50:33ACTIVE30/09/17large-scale use,
pouring application,
outdoor, liquid, level IEFCC_SWED_PW_L_li_13_o_I_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher level II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_L_li_13_o_I_v2falselarge-scale use,
pouring application,
outdoor, liquid, level IPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f308634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (ca. 50 - 1000 kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-21T13:52:022017-12-19T09:23:16ACTIVE30/09/17mixing, outdoor, liquid,
level IEFCC_SWED_PW_li_5_o_I_v2Liquid products/components are mixed prior to use by means of a suitable tool driven by a low-speed drill (max. 300 rpm) for approx. 3 minutes or until homogeneous. For two- or multi component systems, the remaining components are poured or scraped into the mixing pail and mixed as described for another 3 minutes or until homogenous. Typical quantity per mixing activity: 10-50 kg. outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Activities with open liquid surfaces or open reservoirs
Activity subclass: Activities with agitated surfacesEFCC_SUMI_PW_li_5_o_I_v2falsemixing, outdoor, liquid,
level IPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possible;
if ART is used, low viscosity like water should be selectedfalseliquidfalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalsetrue8.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONWear chemically resistant gloves (tested to EN374) in combination with ‘basic’ employee training.falsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb08634279-afd9-4166-b9aa-c7e27459f191Use on construction sites near to existing or new buildingsfalsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f9101b068d5-06c6-426d-90c0-885667b1a711Assumes a good basic standard of occupational hygiene is implementedfalsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb63c7a29e5-55ec-423e-a4c7-eb2cebfb1139Product is mixed in pails, which can be transported and handled manually with a diameter of ca. 40cm.falsetrue10608e6d-969f-4250-b4af-6be00e93c4908d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:35:002018-02-09T17:35:00ACTIVE30/09/17large-scale use,
pouring application,
indoor, liquid, level IIIEFCC_SWED_PW_L_li_13_i_III_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. indoors.
Level of risk management: highLevel of risk management: high
This SWED is independent of any substance properties.
This SWED level III contains the most restrictive range of RMMs. If this level is not required for the specific substance the lower levels II or I should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_L_li_13_i_III_v2falselarge-scale use,
pouring application,
indoor, liquid, level IIIPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (ca. 50 - 1000 kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:38:302018-02-09T17:38:30ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
indoor, liquid, level IIIEFCC_SWED_PW_li_8a_i_III_v2For two- or multi component systems, the remaining components are poured or scraped into the mixing pail. The mixed material is poured into another pail and mixed as described for another minute. Typical quantity per transfer activity: 10-50 kg. indoors.
Level of risk management: highLevel of risk management: high
This SWED is independent of any substance properties.
This SWED level III contains the most restrictive range of RMMs. If this level is not required for the specific substance the lower levels II or I should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of liquid products
Activity subclass: Falling liquidsEFCC_SUMI_PW_li_8a_i_III_v2falseTransfer of mixtures at non-dedicated facilities,
indoor, liquid, level IIIPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171355true1.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONMobile ventilation to move vapours away from the workplace can be temporarily installed.falsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION-YESINHALATION80.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdebc7bfaa29-524e-412f-8f0a-edb015dcf1a5falsetrue4d5d8c98-6735-4f21-a798-e6eb392f567601b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-12T15:17:062018-02-12T15:17:06ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
outdoor, powder, level IEFCC_SWED_PW_p_8a_o_I_v2For multi component systems, the liquid components are poured or scraped into the mixing pail and mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous before the powder component is added. Typical quantity per transfer activity: 10-50 kg. outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher level II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of powders, granules or pelletised material
Activity subclass: Falling of powders, granules or pelletised materialEFCC_SUMI_PW_p_8a_o_I_v2falseTransfer of mixtures at non-dedicated facilities,
outdoor, powder, level IPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTapplies to powder substances only, dustiness according to evaluated substancefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_UNSPECIFIEDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONdust mask P2falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18e08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb8fe4215a-d760-46af-ac66-beb8b36d6302falsetruebf735df4-3b17-4949-a95d-a76b2892427d01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb61b9fc15e-e89b-4703-966f-c3e4aec308c9falsetrue6afaad5d-8608-4340-81a0-b02cfde25d2c8d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:33:482018-02-09T17:33:48ACTIVE30/09/17small-scale use,
pouring application,
indoor, liquid, level IIIEFCC_SWED_PW_S_li_13_i_III_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. indoors.
Level of risk management: highLevel of risk management: high
This SWED is independent of any substance properties.
This SWED level III contains the most restrictive range of RMMs. If this level is not required for the specific substance the lower levels II or I should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_S_li_13_i_III_v2falsesmall-scale use,
pouring application,
indoor, liquid, level IIIPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (ca. 10 - 50 kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-06T14:35:432017-12-19T09:32:10ACTIVE30/09/17small-scale use,
roller or brushing application,
outdoor, liquid, level IIEFCC_SWED_PW_S_li_10_o_II_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_S_li_10_o_II_v2falsesmall-scale use,
roller or brushing application,
outdoor, liquid, level IIPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f308634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (< 100kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:30:282018-02-09T17:30:28ACTIVE30/09/17small-scale use,
roller or brushing application,
indoor, liquid, level IIEFCC_SWED_PW_S_li_10_i_II_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient. If level II itself is not sufficient level III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_S_li_10_i_II_v2falsesmall-scale use,
roller or brushing application,
indoor, liquid, level IIPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (< 100kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-06T14:31:112017-12-19T09:31:36ACTIVE30/09/17small-scale use,
roller or brushing application,
outdoor, liquid, level IEFCC_SWED_PW_S_li_10_o_I_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher level II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_S_li_10_o_I_v2falsesmall-scale use,
roller or brushing application,
outdoor, liquid, level IPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f308634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (< 100kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-06T14:45:142017-12-19T09:02:44ACTIVE30/09/17large-scale use,
roller or brushing application,
outdoor, liquid, level IIEFCC_SWED_PW_L_li_10_o_II_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_L_li_10_o_II_v2falselarge-scale use,
roller or brushing application,
outdoor, liquid, level IIPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f308634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (> 100kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-07T11:59:172017-12-19T08:53:48ACTIVE30/09/17large-scale use,
pouring application,
outdoor, liquid, level IIEFCC_SWED_PW_L_li_13_o_II_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_L_li_13_o_II_v2falselarge-scale use,
pouring application,
outdoor, liquid, level IIPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f308634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (ca. 50 - 1000 kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-28T14:45:082017-12-19T08:46:02ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
outdoor, liquid, level IIEFCC_SWED_PW_li_8a_o_II_v2For two- or multi component systems, the remaining components are poured or scraped into the mixing pail. The mixed material is poured into another pail. Typical quantity per transfer activity: 10-50 kg. outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of liquid products
Activity subclass: Falling liquidsEFCC_SUMI_PW_li_8a_o_II_v2falseTransfer of mixtures at non-dedicated facilities,
outdoor, liquid, level IIPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171355true1.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18e08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdebc7bfaa29-524e-412f-8f0a-edb015dcf1a5"Type of transfer:
free falling transfer from bucket to bucket with a drop height of ca. 0.5 m at a rate of 10 - 100 l/min"falsetrue4d5d8c98-6735-4f21-a798-e6eb392f567601b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-28T14:22:242017-12-19T09:19:31ACTIVE30/09/17mixing, indoor, powder,
level IEFCC_SWED_PW_p_5_i_I_v2The liquid component (water or mixing liquid) is poured into a mixing vessel and the powder product is added. For multi component systems, the liquid components are poured or scraped into the mixing pail and mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous before the powder component is added. The components are mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous. Alternatively, compulsory mixers may be used if appropriate. Typical quantity per mixing activity: 10-50 kg. indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Movement and agitation of powders, granules or pelletised material
Activity subclass: no activity subclass
mixing or blending in large bucketsEFCC_SUMI_PW_p_5_i_I_v2falsemixing, indoor, powder,
level IPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTapplies to powder substances only, dustiness according to evaluated substancefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_UNSPECIFIEDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONdust mask P2falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb6691ed19a-ebd3-4b19-b034-7731f5e6bff4falsetrue84bb68af-6052-415b-968e-ab6e58b850a68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-07T10:54:032017-12-19T09:34:49ACTIVE30/09/17spray application (high energy),
outdoor, liquid, level IEFCC_SWED_PW_li_11_o_I_v2The mixed material is poured into the spraying equipment (airless) and sprayed onto the surface through a handheld nozzle, workers standing upright, outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II or III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spray application of liquids
activity subclass: surface spraying of liquidsEFCC_SUMI_PW_li_11_o_I_v2falsespray application (high energy),
outdoor, liquid, level IPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfilter mask APF 10falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgoggles or maskfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18e08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb64740f443-8bde-4f62-94cf-1ea8de374570falseSpraying in any direction (including upwards)true7e3e4293-1d8d-4100-ac58-35004ce631d4f404fa98-c954-4125-bc44-ec1f1759c514"Amount of product applied:
from small to > 3l/min (ca. 5kg/min)"falsefalsef793828f-837f-4455-88cb-3b60f72e6e46e141a3ed-982e-47ca-9e57-e1478a18c43efalsetrue5b0da094-41db-4b8f-8664-3d33e1b8191f69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:20:352018-02-09T17:22:00ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
outdoor, powder, level IIEFCC_SWED_PW_p_8a_o_II_v2For multi component systems, the liquid components are poured or scraped into the mixing pail and mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous before the powder component is added. Typical quantity per transfer activity: 10-50 kg. outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of powders, granules or pelletised material
Activity subclass: Falling of powders, granules or pelletised materialEFCC_SUMI_PW_p_8a_o_II_v2falseTransfer of mixtures at non-dedicated facilities,
outdoor, powder, level IIPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTapplies to powder substances only, dustiness according to evaluated substancefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_UNSPECIFIEDDURATION_OF_ACTIVITYfalseESCom-11133171355true1.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONdust mask P2falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18e08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb8fe4215a-d760-46af-ac66-beb8b36d6302Type of transfer: free falling transfer from bucket to bucket with a drop height of ca. 0.5 m at a rate of 10 - 100 kg/minfalsetruebf735df4-3b17-4949-a95d-a76b2892427d01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb61b9fc15e-e89b-4703-966f-c3e4aec308c9falsetrue6afaad5d-8608-4340-81a0-b02cfde25d2c8d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-28T14:09:432017-12-19T09:25:14ACTIVE30/09/17mixing, outdoor, powder,
level IIEFCC_SWED_PW_p_5_o_II_v2The liquid component (water or mixing liquid) is poured into a mixing vessel and the powder product is added. For multi component systems, the liquid components are poured or scraped into the mixing pail and mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous before the powder component is added. The components are mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous. Alternatively, compulsory mixers may be used if appropriate. Typical quantity per mixing activity: 10-50 kg. outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Movement and agitation of powders, granules or pelletised material
Activity subclass: no activity subclass
mixing or blending in large bucketsEFCC_SUMI_PW_p_5_o_II_v2falsemixing, outdoor, powder,
level IIPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTapplies to powder substances only, dustiness according to evaluated substancefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_UNSPECIFIEDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONdust mask P2falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb6691ed19a-ebd3-4b19-b034-7731f5e6bff4falsetrue84bb68af-6052-415b-968e-ab6e58b850a68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:37:412018-02-09T17:37:41ACTIVE30/09/17mixing, indoor, liquid,
level IIIEFCC_SWED_PW_li_5_i_III_v2Liquid products/components are mixed prior to use by means of a suitable tool driven by a low-speed drill (max. 300 rpm) for approx. 3 minutes or until homogeneous. For two- or multi component systems, the remaining components are poured or scraped into the mixing pail and mixed as described for another 3 minutes or until homogenous. Typical quantity per mixing activity: 10-50 kg. indoors.
Level of risk management: highLevel of risk management: high
This SWED is independent of any substance properties.
This SWED level III contains the most restrictive range of RMMs. If this level is not required for the specific substance the lower levels II or I should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Activities with open liquid surfaces or open reservoirs
Activity subclass: Activities with agitated surfacesEFCC_SUMI_PW_li_5_i_III_v2falsemixing, indoor, liquid,
level IIIPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possible;
if ART is used, low viscosity like water should be selectedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseAvoid carrying out activities involving exposure for more than 4 hours per day.true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONMobile ventilation to move vapours away from the workplace can be temporarily installed.falsetrueTRA-WORKER-LOCAL-EXHAUST-VENTILATION-YESINHALATION80.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb63c7a29e5-55ec-423e-a4c7-eb2cebfb1139Product is mixed in pails, which can be transported and handled manually with a diameter of ca. 40cm.falsetrue10608e6d-969f-4250-b4af-6be00e93c4908d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-07T11:46:522017-12-19T09:28:03ACTIVE30/09/17small-scale use,
pouring application,
outdoor, liquid, level IEFCC_SWED_PW_S_li_13_o_I_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher level II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_S_li_13_o_I_v2falsesmall-scale use,
pouring application,
outdoor, liquid, level IPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f308634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (ca. 10 - 50 kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T16:40:242018-02-09T16:41:54ACTIVEspray application (high energy),
indoor, liquid, level IIEFCC_SWED_PW_li_11_i_II_v2The mixed material is poured into the spraying equipment (airless) and sprayed onto the surface through a handheld nozzle, workers standing upright, indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient. If level II itself is not sufficient level III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spray application of liquids
activity subclass: surface spraying of liquidsEFCC_SUMI_PW_li_11_i_II_v2falsespray application (high energy),
indoor, liquid, level IIPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgoggles or maskfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb64740f443-8bde-4f62-94cf-1ea8de374570falseSpraying in any direction (including upwards)true7e3e4293-1d8d-4100-ac58-35004ce631d4f404fa98-c954-4125-bc44-ec1f1759c514"Amount of product applied:
from small to > 3l/min (ca. 5kg/min)"falsefalsef793828f-837f-4455-88cb-3b60f72e6e46TRA-WORKER-RESPIRATORY-PROTECTIONair fed mask independent from ambient air (97% efficiency)falseair fed mask independent from ambient air (Effectiveness: 97%)trueTRA-WORKER-RESPIRATORY-PROTECTION_RP95INHALATION95.0air fed mask independent from ambient air (97% efficiency)e141a3ed-982e-47ca-9e57-e1478a18c43efalsetrue5b0da094-41db-4b8f-8664-3d33e1b8191f69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:31:042018-02-09T17:31:04ACTIVE30/09/17small-scale use,
roller or brushing application,
indoor, liquid, level IIIEFCC_SWED_PW_S_li_10_i_III_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, indoors.
Level of risk management: highLevel of risk management: high
This SWED is independent of any substance properties.
This SWED level III contains the most restrictive range of RMMs. If this level is not required for the specific substance the lower levels II or I should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_S_li_10_i_III_v2falsesmall-scale use,
roller or brushing application,
indoor, liquid, level IIIPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (< 100kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-07T11:52:032017-12-19T09:28:50ACTIVE30/09/17small-scale use,
pouring application,
outdoor, liquid, level IIEFCC_SWED_PW_S_li_13_o_II_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_S_li_13_o_II_v2falsesmall-scale use,
pouring application,
outdoor, liquid, level IIPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f308634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (ca. 10 - 50 kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-23T15:21:132017-12-19T09:24:37ACTIVE30/09/17mixing, outdoor, powder,
level IEFCC_SWED_PW_p_5_o_I_v2The liquid component (water or mixing liquid) is poured into a mixing vessel and the powder product is added. For multi component systems, the liquid components are poured or scraped into the mixing pail and mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous before the powder component is added. The components are mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous. Alternatively, compulsory mixers may be used if appropriate. Typical quantity per mixing activity: 10-50 kg. outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Movement and agitation of powders, granules or pelletised material
Activity subclass: no activity subclass
mixing or blending in large bucketsEFCC_SUMI_PW_p_5_o_I_v2falsemixing, outdoor, powder,
level IPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTapplies to powder substances only, dustiness according to evaluated substancefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_UNSPECIFIEDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONdust mask P2falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb6691ed19a-ebd3-4b19-b034-7731f5e6bff4falsetrue84bb68af-6052-415b-968e-ab6e58b850a68d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:34:202018-02-09T17:34:20ACTIVE30/09/17large-scale use,
pouring application,
indoor, liquid, level IIEFCC_SWED_PW_L_li_13_i_II_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_L_li_13_i_II_v2falselarge-scale use,
pouring application,
indoor, liquid, level IIPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (ca. 50 - 1000 kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T16:42:442018-02-09T16:42:44ACTIVEspray application (high energy),
indoor, liquid, level IIIEFCC_SWED_PW_li_11_i_III_v2The mixed material is poured into the spraying equipment (airless) and sprayed onto the surface through a handheld nozzle, workers standing upright, indoors.
Level of risk management: highLevel of risk management: high
This SWED is independent of any substance properties.
This SWED RMM III contains the most restrictive range of RMMs. If this level is not required for the specific substance the lower levels II or I should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spray application of liquids
activity subclass: surface spraying of liquidsEFCC_SUMI_PW_li_11_i_III_v2falsespray application (high energy),
indoor, liquid, level IIIPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgoggles or maskfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb64740f443-8bde-4f62-94cf-1ea8de374570falseSpraying in any direction (including upwards)true7e3e4293-1d8d-4100-ac58-35004ce631d4f404fa98-c954-4125-bc44-ec1f1759c514"Amount of product applied:
from small to > 3l/min (ca. 5kg/min)"falsefalsef793828f-837f-4455-88cb-3b60f72e6e46TRA-WORKER-RESPIRATORY-PROTECTIONair fed mask independent from ambient air (97% in ART)falseair fed mask independent from ambient air (Effectiveness: 97%)trueTRA-WORKER-RESPIRATORY-PROTECTION_RP95INHALATION95.0air fed mask independent from ambient air (97% in ART)e141a3ed-982e-47ca-9e57-e1478a18c43efalsetrue5b0da094-41db-4b8f-8664-3d33e1b8191f69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-06T14:41:382017-12-19T09:02:05ACTIVE30/09/17large-scale use,
roller or brushing application,
outdoor, liquid, level IEFCC_SWED_PW_L_li_10_o_I_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, outdoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher level II should be checked.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_L_li_10_o_I_v2falselarge-scale use,
roller or brushing application,
outdoor, liquid, level IPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f308634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (> 100kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-12T15:14:372018-02-12T15:14:37ACTIVE30/09/17Transfer of mixtures at non-dedicated facilities,
indoor, powder, level IIEFCC_SWED_PW_p_8a_i_II_v2For multi component systems, the liquid components are poured or scraped into the mixing pail and mixed by means of a suitable tool driven by a low-speed drill (max 300 rpm) for approx. 3 minutes or until homogeneous before the powder component is added. Typical quantity per transfer activity: 10-50 kg. indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Transfer of powders, granules or pelletised material
Activity subclass: Falling of powders, granules or pelletised materialEFCC_SUMI_PW_p_8a_i_II_v2falseTransfer of mixtures at non-dedicated facilities,
indoor, powder, level IIPROC_8aW_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTapplies to powder substances only, dustiness according to evaluated substancefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-SOLID_UNSPECIFIEDDURATION_OF_ACTIVITYfalseESCom-11133171355true1.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NODERMAL0.0INHALATION0.0TRA-WORKER-RESPIRATORY-PROTECTIONdust mask P2falsetrueTRA-WORKER-RESPIRATORY-PROTECTION_RP90INHALATION90.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb8fe4215a-d760-46af-ac66-beb8b36d6302falsetruebf735df4-3b17-4949-a95d-a76b2892427d01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb61b9fc15e-e89b-4703-966f-c3e4aec308c9falsetrue6afaad5d-8608-4340-81a0-b02cfde25d2c8d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-06T14:59:342017-12-19T08:54:27ACTIVE30/09/17large-scale use,
roller or brushing application,
indoor, liquid, level IEFCC_SWED_PW_L_li_10_i_I_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II or III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_L_li_10_i_I_v2falselarge-scale use,
roller or brushing application,
indoor, liquid, level IPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (> 100kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T16:45:412018-02-09T16:45:41ACTIVEspray application (high energy),
outdoor, liquid, level IIEFCC_SWED_PW_li_11_o_II_v2The mixed material is poured into the spraying equipment (airless) and sprayed onto the surface through a handheld nozzle, workers standing upright, outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient. If level II itself is not sufficient level III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spray application of liquids
activity subclass: surface spraying of liquidsEFCC_SUMI_PW_li_11_o_II_v2falsespray application (high energy),
outdoor, liquid, level IIPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgoggles or maskfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18e08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb64740f443-8bde-4f62-94cf-1ea8de374570falseSpraying in any direction (including upwards)true7e3e4293-1d8d-4100-ac58-35004ce631d4f404fa98-c954-4125-bc44-ec1f1759c514"Amount of product applied:
from small to > 3l/min (ca. 5kg/min)"falsefalsef793828f-837f-4455-88cb-3b60f72e6e46TRA-WORKER-RESPIRATORY-PROTECTIONair fed mask independent from ambient air (97% efficiency in ART)falseair fed mask independent from ambient air (Effectiveness: 97%)trueTRA-WORKER-RESPIRATORY-PROTECTION_RP95INHALATION95.0air fed mask independent from ambient air (97% efficiency in ART)e141a3ed-982e-47ca-9e57-e1478a18c43efalsetrue5b0da094-41db-4b8f-8664-3d33e1b8191f69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-07T12:03:222017-12-19T09:25:57ACTIVE30/09/17small-scale use,
pouring application,
indoor, liquid, level IEFCC_SWED_PW_S_li_13_i_I_v2The mixed material is poured onto / into the prepared substrate. A vibrator is used when underpouring large base plates. In case of small areas, rotating chains or wire loops help to make the material flow more smoothly. indoors.
Level of risk management: lowLevel of risk management: low
This SWED is independent of any substance properties.
This SWED level I contains the least restrictive range of RMMs. If this level is not sufficient for the specific substance the higher levels II or III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassEFCC_SUMI_PW_S_li_13_i_I_v2falsesmall-scale use,
pouring application,
indoor, liquid, level IPROC_13W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171304true8.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-BASICINHALATION0.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
< 3m²/h (ca. 10 - 50 kg/h)"falsetrue3f31ec30-878b-4e13-a56d-7fb5e0bc142c69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T16:46:452018-02-09T16:46:45ACTIVEspray application (high energy),
outdoor, liquid, level IIIEFCC_SWED_PW_li_11_o_III_v2The mixed material is poured into the spraying equipment (airless) and sprayed onto the surface through a handheld nozzle, workers standing upright, outdoors.
Level of risk management: highLevel of risk management: high
This SWED is independent of any substance properties.
This SWED level III contains the most restrictive range of RMMs. If this level is not required for the specific substance the lower levels II or I should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spray application of liquids
activity subclass: surface spraying of liquidsEFCC_SUMI_PW_li_11_o_III_v2falsespray application (high energy),
outdoor, liquid, level IIIPROC_11W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEUse on construction sites near to existing or new buildingsfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgoggles or maskfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18e08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb64740f443-8bde-4f62-94cf-1ea8de374570falseSpraying in any direction (including upwards)true7e3e4293-1d8d-4100-ac58-35004ce631d4f404fa98-c954-4125-bc44-ec1f1759c514"Amount of product applied:
from small to > 3l/min (ca. 5kg/min)"falsefalsef793828f-837f-4455-88cb-3b60f72e6e46TRA-WORKER-RESPIRATORY-PROTECTIONair fed mask independent from ambient air (97% efficiency in ART)falseair fed mask independent from ambient air (Effectiveness: 97%)trueTRA-WORKER-RESPIRATORY-PROTECTION_RP95INHALATION95.0air fed mask independent from ambient air (97% efficiency in ART)e141a3ed-982e-47ca-9e57-e1478a18c43efalsetrue5b0da094-41db-4b8f-8664-3d33e1b8191f69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:32:172018-02-09T17:32:17ACTIVE30/09/17large-scale use,
roller or brushing application,
indoor, liquid, level IIIEFCC_SWED_PW_L_li_10_i_III_v2The mixed products are spread out on the surface via rolling, brushing, or troweling. Relevant surfaces are floors and walls, indoors.
Level of risk management: highLevel of risk management: high
This SWED is independent of any substance properties.
This SWED level III contains the most restrictive range of RMMs. If this level is not required for the specific substance the lower levels II or I should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Spreading of liquid products
Activity subclass: no activity subclassesEFCC_SUMI_PW_L_li_10_i_III_v2falselarge-scale use,
roller or brushing application,
indoor, liquid, level IIIPROC_10W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possiblefalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseESCom-11133171356true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsetrue8c2c7254-26dd-4ab3-8db5-31b2dec268f3ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb66b098f96-ae12-42ec-9174-a45046ac0d13"Amount of product applied:
> 3m²/h (> 100kg/h)"falsefalse1dcf87f8-ad98-422b-8986-db4f6654a20a69d8b8ed-2017-4a0b-a0f7-c5540cfcfb3dWear working clothes covering also arms and legs to protect from splashestruetrueb21c2ad1-6535-45e1-9d1a-839f32bc45c930/09/17Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T17:26:042018-02-09T17:26:04ACTIVE30/09/2017mixing, indoor, liquid,
level IIEFCC_SWED_PW_li_5_i_II_v2Liquid products/components are mixed prior to use by means of a suitable tool driven by a low-speed drill (max. 300 rpm) for approx. 3 minutes or until homogeneous. For two- or multi component systems, the remaining components are poured or scraped into the mixing pail and mixed as described for another 3 minutes or until homogenous. Typical quantity per mixing activity: 10-50 kg. indoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient. If level II itself is not sufficient level III should be checked.
For the described use (process/activity) three SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Activities with open liquid surfaces or open reservoirs
Activity subclass: Activities with agitated surfacesEFCC_SUMI_PW_li_5_i_II_v2falsemixing, indoor, liquid,
level IIPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possible;
if ART is used, low viscosity like water should be selectedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseAvoid carrying out activities involving exposure for more than 4 hours per day.true4.0TRA-WORKER-PLACE_OF_USEIndoors with all possible room sizesfalsetrueTRA-WORKER-INDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-GENERAL_VENTILATIONfalsetrueTRA-WORKER-GENERAL_VENTILATION-GOODINHALATION30.0TRA-WORKER-LOCAL-EXHAUST-VENTILATIONfalsefalseTRA-WORKER-LOCAL-EXHAUST-VENTILATION-NOINHALATION0.0DERMAL0.0TRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18eec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711falsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb63c7a29e5-55ec-423e-a4c7-eb2cebfb1139Product is mixed in pails, which can be transported and handled manually with a diameter of ca. 40cm.falsetrue10608e6d-969f-4250-b4af-6be00e93c4908d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/2017Deutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-21T14:00:582017-12-19T09:23:58ACTIVE30/09/17mixing, outdoor, liquid,
level IIEFCC_SWED_PW_li_5_o_II_v2Liquid products/components are mixed prior to use by means of a suitable tool driven by a low-speed drill (max. 300 rpm) for approx. 3 minutes or until homogeneous. For two- or multi component systems, the remaining components are poured or scraped into the mixing pail and mixed as described for another 3 minutes or until homogenous. Typical quantity per mixing activity: 10-50 kg. outdoors.
Level of risk management: mediumLevel of risk management: medium
This SWED is independent of any substance properties.
This SWED level II contains an intermediate range of RMMs. This level should only be applied for a specific substance if level I is not sufficient.
For the described use (process/activity) two SWEDs with different levels of RMM are available.When higher tier assessment tools like ART or Stoffenmanager will be used and input parameters are missing the worst case input (or the default, if any) has to be chosen.
Activity class: Activities with open liquid surfaces or open reservoirs
Activity subclass: Activities with agitated surfacesEFCC_SUMI_PW_li_5_o_II_v2falsemixing, outdoor, liquid,
level IIPROC_5W_PERCENTAGE_OF_SUBSTANCE_IN_MIXTUREfalsetrue100.0W_PHYSICAL_FORM_OF_PRODUCTbroad range of viscosities is possible;
if ART is used, low viscosity like water should be selectedfalsefalseW_PHYSICAL_FORM_OF_PRODUCT-LIQUIDDURATION_OF_ACTIVITYfalseAvoid carrying out activities involving exposure for more than 4 hours per day.true4.0TRA-WORKER-PLACE_OF_USEfalsetrueTRA-WORKER-OUTDOOROPERATING_TEMPERATUREfalseESCom-10133224959true30.0TRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICEfalseESCom-11133171303trueTRA-WORKER-OCCUPATIONAL-HYGIENE-PRACTICE-PROFESSIONALTRA-WORKER-RESPIRATORY-PROTECTIONfalsefalseTRA-WORKER-RESPIRATORY-PROTECTION_NOT_USED_VOINHALATION0.0TRA-WORKER-DERMAL-PROTECTIONfalsetrueTRA-WORKER-DERMAL-PROTECTION_PPE90DERMAL90.0USE_EYE_PROTECTIONgogglesfalsetrueUSE_EYE_PROTECTION-YES145faaaa-bfad-4bb0-813b-2f77c3f9d4dcfalsefalseede2d84b-7343-482b-ba2d-088e5d90d18e08634279-afd9-4166-b9aa-c7e27459f191falsefalseccc2a1bd-7f2e-4d91-b2cf-9f4d0a181f91ec75d28e-3aed-43df-8f64-12c8dcb2e68dfalsetrue39c87b25-096d-489d-952b-7de2d36ccdeb01b068d5-06c6-426d-90c0-885667b1a711Effective housekeepingfalsetrue641a4c3f-8f42-4ed4-b69f-7d731d073fb63c7a29e5-55ec-423e-a4c7-eb2cebfb1139Product is mixed in pails, which can be transported and handled manually with a diameter of ca. 40cm.falsetrue10608e6d-969f-4250-b4af-6be00e93c4908d8af1a9-0291-4e73-a47c-877be3fe2ec2truetrue95551623-e68d-4543-83a9-42617f2d049c30/09/17ECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:25:302017-12-15T11:59:02ACTIVEWORKERSfalseINHALATIONW_5ARTNotruefalseYesfalseESCom-17297180701trueFEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32018-03-16T11:28:432018-03-16T11:28:43ACTIVEENVIRONMENTfalseAIRE_W_3E_C_4Professional and consumer product use with limited or no technical control of emission. Upon curing, substances evaporate to the ambient airtrueProfessional and consumer product use with limited or no technical control of emission. Upon curing, substances evaporate to the ambient airtrueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:22:322017-12-15T11:56:28ACTIVEWORKERSfalseINHALATIONW_5ARTClose to buildingstruefalseFar from buildingsfalseAssumes that typical outdoor ventilation conditions are no constrained by buildings.trueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:23:402017-12-15T11:57:29ACTIVEWORKERSfalseINHALATIONW_5ART< 1 m (Near Field)truefalse> 1 m (Far field)falseEnsure that distance between source of emission and breathing zone of worker is greater than 1m.trueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:38:322017-12-15T12:23:48ACTIVEWORKERSRelevant for ART activity subclass "Falling of powders"falseINHALATIONW_5ART≥ 0. 5 mtruefalse< 0.5 mfalseAssumes drop height during transfer < 0.5 m.trueFEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32017-12-13T14:49:202017-12-13T14:49:20ACTIVEENVIRONMENTFEICA EFCCfalseWATERE_W_3E_C_4batch process, no onsite RMM considered as there is no contact/release to waterfalsebatch process, no onsite RMM considered as there is no contact/release to watertrueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:27:142017-12-15T12:42:34ACTIVEWORKERSRelevant for ART activity subclasses “Activities with relatively undisturbed surfaces” and “Activities with agitated surfaces”falseINHALATIONW_5ART> 3 m2truefalse1-3 m2falseCovers open baths or reservoirs with surface < 3 m2.true0.3-1 m2falseCovers open baths or reservoirs with surface < 1 m2.true0.1-0.3 m2falseCovers open baths or reservoirs with surface < 0.3 m2.true< 0.1 m2falseCovers open baths or reservoirs with surface < 0.1 m2.trueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:30:562017-12-15T12:09:33ACTIVEWORKERSRelevant for ART activity subclass "Surface spraying of liquids"falseINHALATIONW_5ARTSpraying in any direction (including upwards)truefalseOnly horizontal or downward sprayingfalseESCom-11133170482trueOnly downward sprayingfalseESCom-11133170483trueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-12-11T16:54:312017-12-15T12:33:59ACTIVEWORKERSRelevant for ART activity class “Movement and agitation of powders”falseINHALATIONW_2ART≥ 1000 kgtruefalse100–1000 kgfalseCovers quantities < 1000 kgtrue10–100 kgfalseCovers quantities < 100 kgtrue1–10 kgfalseCovers quantities < 10 kgtrue0.1–1 kgfalseCovers quantities < 1 kgtrue10–100 gfalseCovers quantities < 100 gtrue< 10 gfalseCovers quantities < 10 gtrueDeutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-04-14T09:44:282017-04-14T09:45:12OBSOLETEc47066f0-fb90-49b5-b194-2fcb0563f6a2WORKERSfalseDERMALW_6NotruetrueYes, apronfalseWear apron to protect from splashestrueYes, working clothes covering also arms and legsfalseWear working clothes covering also arms and legs to protect from splashestrueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:33:502017-12-15T12:16:44ACTIVEWORKERSRelevant for ART activity class “Spreading of liquid products”falseINHALATIONW_5ARTSurface > 3 m2/hourtruefalseSurface: 1–3 m2/hourfalseCovers spreading on surfaces < 3 m2/hourtrueSurface: 0.3–1 m2/hourfalseCovers spreading on surfaces < 1 m2/hourtrueSurface: 0.1–0.3 m2/hourfalseCovers spreading on surfaces < 0.3 m2/hourtrueSurface < 0.1 m2/hourfalseCovers spreading on surfaces < 0.1 m2/hourtrueDeutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2018-02-09T15:57:342018-02-09T15:59:30ACTIVEENVIRONMENTfalseAIRE_W_3E_C_4RMMtrueWaste gas treatment, adsorption, incineration, etc. (80% efficiency)trueAIR80.0FEICA / EFCC (2017). Specific Environmental Release Categories (SPERCs) for the formulation of adhesives and sealants and construction chemical productsDeutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-11-22T09:56:512018-01-26T09:54:06ACTIVEWORKERSUse a splash guardfalseDERMALW_6...trueESCom-15193135774trueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:39:502017-12-15T12:22:26ACTIVEWORKERSRelevant for ART activity subclasses "Falling of powders" and "Vacuum transfer of powders”falseINHALATIONW_2ART> 1000 kg/mintruefalse100–1000 kg/minfalseCovers transfer of powders <1000 kg/mintrue10–100 kg/minfalseCovers transfer of powders <100 kg/mintrue1–10 kg/minfalseCovers transfer of powders <10 kg/mintrue0.1–1 kg/minfalseCovers transfer of powders <1 kg/mintrue10–100 g/minfalseCovers transfer of powders <100 g/mintrue< 10 g/minfalseCovers transfer of powders <10 g/mintrueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4EUSES 2.1.2YestruefalseNofalseESCom-11133170644trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_2TRA Worker 3.08.00.024.0<=ESCom-15193135624ESCom-11133171521trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTtrueAIRSOILWATERE_W_6E_C_4IndoorfalseESCom-9313213237trueOutdoorfalseESCom-9313213238trueIndoor/OutdoorfalseESCom-10133220202trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4E_C_4EUSES 2.1.2StandardtrueESCom-11133170613trueWATER0.0100.0Site specificfalseESCom-11133171638trueWATER0.0100.0NonefalsefalseWATER0.00.00.0ChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTEUSES DeterminanttrueWATERE_W_4EUSES 2.1.22000.00.0>=ESCom-11133170818ESCom-10133222104trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueINHALATIONW_5TRA Worker 3.040.00.0<=ESCom-9269144108ESCom-12355002161trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2EUSES 2.1.20.0<=ESCom-11133170824ESCom-10076084404trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2EUSES 2.1.20.0<=ESCom-15193135620ESCom-10076084403trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTReleaseModule's DeterminanttrueAIRSOILWATERE_W_2E_C_2EUSES 2.1.20.0<=ESCom-15193135620falseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALW_4TRA Worker 3.0NotruefalseDERMAL0.00.00.0Yes (Chemically resistant gloves conforming to EN374) and (other) appropriate dermal protectionfalseESCom-10133224896ESCom-12355002165trueDERMAL80.080.080.0Yes (Chemically resistant gloves conforming to EN374 with basic employee training) and (other) appropriate dermal protectionfalseESCom-11133171457ESCom-12355002165trueDERMAL90.090.090.0Yes (Chemically resistant gloves conforming to EN374 with specific activity training) and (other) appropriate dermal protectionfalseESCom-11133171458ESCom-12355002165trueDERMAL95.095.095.0ChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueINHALATIONW_3TRA Worker 3.0Basic general ventilation (1-3 air changes per hour)trueESCom-12355002163trueINHALATION0.00.00.0Good general ventilation (3-5 air changes per hour) falseESCom-11133171363trueINHALATION30.030.030.0Enhanced general ventilation (5-10 air changes per hour)falseESCom-12355002164trueINHALATION70.070.070.0ChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_3TRA Worker 3.0NotruefalseINHALATION0.00.00.0DERMAL0.00.00.0YesfalseLocal exhaust ventilation. Inhalation - minimum efficiency of ${value} ${unit}trueINHALATIONDERMALChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_3TRA Worker 3.0AdvancedfalseESCom-11133170494ESCom-11133171359trueBasicfalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueINHALATIONW_5TRA Worker 3.0IndoortrueESCom-9313213237trueOutdoorfalseESCom-9313213238trueIndoor and outdoorfalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueINHALATIONW_4TRA Worker 3.0NotruefalseINHALATION0.00.00.0Yes (Respirator with APF of 10)falseESCom-11133170519ESCom-12355002165trueINHALATION90.090.090.0Yes (Respirator with APF of 20)falseESCom-11133170519ESCom-12355002165trueINHALATION95.095.095.0ChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b5ACTIVEWORKERStrueEYEW_4YestrueESCom-11133171467trueNofalsefalseChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEENVIRONMENTSpecific conditions during the waste life stage of the substance potentially going beyond the local or national legal requirements for waste treatment (disposal or recovery) operations. The determinant values either provide i) a generic justification why no particular considerations regarding environmental risks from the waste life stage are needed or ii) indicate particular conditions to be met during waste treatment. For both assessment cases the single registrant can edit justification/conditions if the generic determinant values do not cover his case.trueWATERE_W_5E_C_3EUSES 2.1.2No (no waste)falseNo waste generated.ESCom-11133170674trueNo (low risk)falseERC based assessment demonstrating control of risk with default conditions. Low risk assumed for waste life stage. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (low amount)falseParticular risks from waste treatment unlikely due to small fraction of used substance entering into the waste stage. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (low concentration)falseParticular risks from waste treatment unlikely due low concentration of substance in waste stream. Waste disposal according to national/local legislation is sufficient.ESCom-11133171479trueNo (other reason)falseWaste disposal according to national/local legislation is sufficient. "Explanation for the CSR" to be reported by each registrant:ESCom-11133171479trueDedicated recollection infrastructure requiredfalseESCom-12355002107trueBiological treatment not appropriatefalseESCom-12355002101trueIncineration not appropriatefalseESCom-12355002100truePrevent formation of hazardous break down products during thermal waste treatment destruction.falsePrevent formation of hazardous break down products during thermal waste treatment.trueClosed system required to minimise release to the environment.falseClosed system required to minimise release to the environment during waste treatment.trueOtherfalse"Explanation for the CSR" to be reported by each registrant on the specific conditions required for waste treatment:trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b5ACTIVEENVIRONMENTtrueWATERE_W_6E_C_4YesfalsefalseNofalseESCom-16354140700trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_1100.00.0100.0<=ESCom-9269144102ESCom-11133171519trueChesarIUC5-97ce9eec-ebfd-4b2d-a61b-b9a975e920b52015-03-16T16:40:11ACTIVEWORKERSTRA Worker condition of usetrueDERMALINHALATIONW_1GasfalsefalseLiquefied gasfalsefalseLiquidfalsefalseSolid (unspecified form)falsefalseSolid (very dusty form)falsefalseSolid (medium dusty form)falseESCom-11133171332trueSolid (non or low dusty form)falseESCom-11133171331trueA.I.S.E.IUC5-8da076c6-3275-4851-a726-2586b783a7e82012-11-09T10:09:202015-02-05T10:59:20ACTIVEENVIRONMENTGeneral good practicefalseAIRSOILWATERE_W_6Trained staff, spill protection including waste reusetrueESCom-12355002133trueFEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32017-12-13T09:24:392017-12-13T09:24:39ACTIVEENVIRONMENTfalseAIRE_W_3E_C_4use of closed or covered manufacturing equipment to minimise evaporative losses of VOCstrueuse of closed or covered manufacturing equipment to minimise evaporative losses of VOCstrueuse of closed or covered manufacturing equipment to minimise evaporative losses of VOCs. Use of general and manufacturing plant extraction to maintain emissions of airborne VOCs below the levels permitted by 1999/13/EG.falseuse of closed or covered manufacturing equipment to minimise evaporative losses of VOCs. Use of general and manufacturing plant extraction to maintain emissions of airborne VOCs below the levels permitted by 1999/13/EG.trueuse of closed or covered manufacturing equipment to minimise evaporative losses of solids below respective OELs. Use of general and manufacturing plant extraction.falseuse of closed or covered manufacturing equipment to minimise evaporative losses of solids below respective OELs. Use of general and manufacturing plant extraction.trueFEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32018-03-16T11:27:322018-03-16T11:27:32ACTIVEENVIRONMENTfalseWATERE_W_3E_C_4Professional and consumer product use with limited or no technical control of emission. Upon curing, substances are included into matrix without intended release to the environment. Very little water contact possible.trueProfessional and consumer product use with limited or no technical control of emission. Upon curing, substances are included into matrix without intended release to the environment. Very little water contact possible.trueFEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32017-12-13T09:22:162017-12-13T09:22:16ACTIVEENVIRONMENTfalseAIRE_W_3E_C_3Air extraction systems with dust filters during transfer and formulation of powder raw materials with efficiencies of 99%trueAir extraction systems with dust filters during transfer and formulation of powder raw materials with efficiencies of 99%trueAir extraction systems with dust filters during transfer and formulation of powder raw materials and products (e.g. cyclones, fabric filter, wet scrubber, electrostatic precipitators (ESP)).falseAir extraction systems with dust filters during transfer and formulation of powder raw materials and products (e.g. cyclones, fabric filter, wet scrubber, electrostatic precipitators (ESP)).trueDeutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-13T09:11:562017-12-13T09:11:56ACTIVEENVIRONMENTfalseAIRSOILWATERE_W_3E_C_4maximise the efficiency of use of input raw materials in multi-stage batch manufacturing process of construction chemicalstrueThe process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products. The manufacture of construction chemicals is a multi-stage batch process. Typical measures may include e.g. - Closed batch systems and / or - Reduced number of transfer and cleaning operations through e.g. dedicated storage tanks for raw materials, premixes and final productsThe process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products. The manufacture of construction chemicals is a multi-stage batch process. Typical measures may include e.g. - Closed batch systems and / or - Reduced number of transfer and cleaning operations through e.g. dedicated storage tanks for raw materials, premixes and final productstruemaximise the efficiency of use of input raw materials in multi-stage batch process of adhesive chemicalsfalseThe manufacture of adhesive chemicals is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products.The manufacture of adhesive chemicals is a multi-stage batch process. The process is arranged to maximise the efficiency of use of input raw materials, through the highest conversion into formulated products.trueInformation on proper dosing is provided on packaging.falseInformation on proper dosing is provided on packaging.trueInformation on proper dosing is provided on packaging. Professional and consumer product use with limited or no technical control of emissionfalseInformation on proper dosing is provided on packaging. Professional and consumer product use with limited or no technical control of emissiontrueTargeted application of adhesive / sealant to substrate, Upon curing, substances are included into matrix without intended release to the environment. Solvents evaporate to a significant extent upon curing of the adhesives.falseTargeted application of adhesive / sealant to substrate, Upon curing, substances are included into matrix without intended release to the environment. Solvents evaporate to a significant extent upon curing of the adhesives.trueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:36:112017-12-15T12:19:59ACTIVEWORKERSRelevant for ART activity subclasses "Falling liquids” and “Bottom loading”falseINHALATIONW_2ESCom-16014091800> 1000 l/min.truefalse100-1000 l/minfalseCovers transfer of liquid <1000 l/mintrue10-100 l/minfalseCovers transfer of liquid <100 l/mintrue1-10 l/minfalseCovers transfer of liquid <10 l/mintrue0.1-1 l/minfalseCovers transfer of liquid <1 l/mintrue< 0.1 l/minfalseCovers transfer of liquid <0.1 l/mintrueFEICA (Fédération Européenne des Industries de Colles et Adhésifs)IUC5-f5cf47b8-7086-493f-8750-5f9dfd70cbe32018-03-16T11:26:002018-03-16T11:26:00ACTIVEENVIRONMENTEquipment cleaningfalseWATERE_W_3E_C_4Equipment cleaned with solvent (organic or water), washing disposed of with wastewater.trueEquipment cleaned with solvent (organic or water), washing disposed of with wastewatertrueEquipment cleaned with water, additional wastewater emission controls are not applicable as releases to wastewater are small.falseEquipment cleaned with water, additional wastewater emission controls are not applicable as releases to wastewater are small.trueDeutsche Bauchemie e.V.IUC5-12bcf1e9-155c-4840-a3f9-acc6fc9be4bf2017-12-13T09:04:132018-02-12T14:53:20ACTIVEENVIRONMENTfalseAIRSOILWATERE_W_3E_C_4High degree of automation in adhesive / sealant formulationtrueHigh degree of automation in adhesive / sealant formulationtrueManualfalseManual raw materials handlingtrueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:32:212017-12-15T12:12:34ACTIVEWORKERSRelevant for ART activity subclass "Surface spraying of liquids"falseINHALATIONW_5ARTHigh compressed airtruefalseNo or low compressed airfalseESCom-11133170505trueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:30:152017-12-15T12:04:53ACTIVEWORKERSfalseINHALATIONW_5ARTYesfalsefalseNofalseAssumes no secondary sources in the vicinity.trueECHA External Tools5ab7a6dd-aad1-48ae-a7fa-17ca413e0b202017-04-11T15:31:252017-12-15T12:11:19ACTIVEWORKERSRelevant for ART activity subclass "Surface spraying of liquids"falseINHALATIONW_2ARTHigh ( > 3 l/min)truefalseModerate (0.3-3 l/min)falseESCom-11133170458trueLow (0.03-0.3 l/min)falseESCom-11133170459trueVery low (< 0.03 l/min)falseESCom-11133170460trueArcheIUC5-ed09f587-8402-4550-b56d-8182a1c602172017-10-20T09:46:322017-10-20T09:46:54ACTIVEENVIRONMENTfalseAIRE_W_3RMMtruetrueAIR90.050.0100.0Daily amount per sitetruetruetrueAnnual amount per sitetruetruetrueIndoor/Outdoor usefalsefalsefalseAssumed domestic sewage treatment plant flowtruetruetrueWear suitable gloves tested to EN374.falsefalsefalseCovers use at ambient temperatures.falsefalsefalseModerate application rate (0.3 - 3 l/minute)falsefalsefalseLow application rate (0.03 - 0.3 l/minute)falsefalsefalseVery low application rate (< 0.03 l/minute)falsefalsefalseEnsure that direction of application is only horizontal or downward.falsefalsefalseEnsure that direction of application is only downward.falsefalsefalseSupervision in place to check that the RMMs in place are being used correctly and OCs followedfalsefalsefalseSpraying with no or low compressed air usefalsefalsefalseWear a respirator providing a minimum efficiency offalsetruetrueSewage treatment plant used.falsefalsefalseNo application of sewage sludge to soilfalsefalsefalseNo waste from processfalsefalsefalsem3/dayfalsefalsefalsetonnes/yearfalsefalsefalseAssumes a good basic standard of occupational hygiene is implementedfalsefalsefalseCovers daily exposures up to 8 hoursfalsefalsefalseSolid, low dustinessfalsefalsefalseSolid, medium dustinessfalsefalsefalseAvoid carrying out activities involving exposure for more than 1 hour.falsefalsefalseAvoid carrying out activities involving exposure for more than 4 hours.falsefalsefalseEnsure control measures are regularly inspected and maintained.falsefalsefalseProvide a good standard of general ventilation (not less than 3 to 5 air changes per hour) .falsefalsefalseWear chemically resistant gloves (tested to EN374) in combination with ‘basic’ employee training.falsefalsefalseWear chemically resistant gloves (tested to EN374) in combination with specific activity training.falsefalsefalseUse suitable eye protection.falsefalsefalseDispose of waste product or used containers according to local regulations.falsefalsefalseCovers concentrations up tofalsetruetrueCovers use up tofalsetruetrueProvide onsite wastewater removal efficiency oftruetruetrueIncineration is not appropriate for waste.falsefalsefalseBiological treatment is not appropriate for waste.falsefalsefalseDedicated recollection infrastructure required for waste.falsefalsefalseTrained staff, spill protection including waste reusefalsefalsefalseAssumes process temperature up tofalsetruetrueProvide a basic standard of general ventilation (1 to 3 air changes per hour) .falsefalsefalseProvide a good standard of controlled ventilation (5 to 10 air changes per hour) .falsefalsefalseFor further specification, refer to section 8 of the SDS.falsefalsefalsetonnes/dayfalsefalsefalseh/dayfalsefalsefalseUse a splash guardfalsefalsefalseART v1.5falsefalsefalseNo water contact during use.falsefalsefalseAssumes that activities are undertaken with appropriate and well maintained equipment by trained personnel operating under supervision.falsefalsefalse%falsefalsefalse°CfalsefalsefalseIndoor usefalsefalsefalseOutdoor usefalsefalsefalse