Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 224-226-6 | CAS number: 4253-90-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Genetic toxicity: in vivo
Administrative data
- Endpoint:
- in vivo mammalian somatic cell study: cytogenicity / erythrocyte micronucleus
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 06 September 2010 - ...........................................
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Compliant to GLP and testing guidelines; adequate coherence between data, comments and conclusions.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 010
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 474 (Mammalian Erythrocyte Micronucleus Test)
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.12 (Mutagenicity - In Vivo Mammalian Erythrocyte Micronucleus Test)
- GLP compliance:
- yes (incl. QA statement)
- Type of assay:
- micronucleus assay
Test material
- Reference substance name:
- Di-tert-butyl trisulphide
- EC Number:
- 224-226-6
- EC Name:
- Di-tert-butyl trisulphide
- Cas Number:
- 4253-90-1
- Molecular formula:
- C8H18S3
- IUPAC Name:
- di-tert-butyltrisulfane
Constituent 1
Test animals
- Species:
- mouse
- Strain:
- Swiss
- Sex:
- male
- Details on test animals or test system and environmental conditions:
- TEST ANIMALS
- Source: Breeder: Charles River Laboratories France, L'Arbresle, France
- Age at study initiation: on the dfay of treatment, the animals were approximately 6 weeks old
- Weight at study initiation: 33.6 g (ranging from 31.8 to 37.5 g)
- Housing: the animals were housed by 2 or 3, in Individually Ventilated Cages (IVC) (polysulfone 900 cm2, Tecniplast) containing autoclaved sawdust
- Diet (e.g. ad libitum): SSNIFF R/M-H pelleted maintenance diet
- Water (e.g. ad libitum): tap water (filtered with a 0.22 µm filter) contained in bottles
- Acclimation period: at least 5 days before the day of treatment
ENVIRONMENTAL CONDITIONS
- Temperature (°C): 22 ± 2°C
- Humidity (%): 30 to 70%,
- Air changes (per hr): at least 12 cycles/hour of filtered non-recycled fresh air
- Photoperiod (hrs dark / hrs light): 12 h / 12 h
Administration / exposure
- Route of administration:
- oral: gavage
- Vehicle:
- - Vehicle used: 0.5% aqueous carboxymethylcellulose
- Concentration of test material in vehicle: 200 mg/mL
- Amount of vehicle (if gavage or dermal): 10 ml/kg
- Lot/batch no.: 060M0017 - Details on exposure:
- PREPARATION OF DOSING SOLUTIONS:
The test item was administered as a suspension in the vehicle. The test item was mixed with the required quantity of vehicle, under magnetic stirring
and until the obtention of a satisfactory homogenization.
For the preliminary test then for the main experiment, the test item was prepared in the vehicle at the concentration of 200 mg/mL.
The dosage forms were prepared daily by the CIT Pharmacy, within the 4 hours before use, and delivered to the study room in brown flasks, at room
temperature. - Duration of treatment / exposure:
- A period of 2 days (2 treatments).
- Frequency of treatment:
- Two treatments separated by 24 hours.
- Post exposure period:
- 24 hours
Doses / concentrations
- Dose / conc.:
- 2 000 mg/kg bw/day (nominal)
- No. of animals per sex per dose:
- 8 males.
- Control animals:
- yes, concurrent vehicle
- Positive control(s):
- The positive control was Cyclophosphamide.
- Route of administration: dissolved in distilled water
- Concentration: 5 mg/mL.
Examinations
- Details of tissue and slide preparation:
- CRITERIA FOR DOSE SELECTION:
In order to select the top dose-level for the cytogenetic study, the dose-level of 2000 mg/kg/day was administered twice 24 hours apart, to three males and three females.
At this dose-level, neither mortality, nor clinical signs were observed in the animals throughout the observation period.
Despite that the PE/NE ratio of the females given the test item at 2000 mg/kg/day was slightly lower than the corresponding vehicle control, all ratios remained consistent with the historical data.
The top dose-level for the cytogenetic test was selected according to the criteria specified in the international guidelines; since no signs of toxicity were observed at 2000 mg/kg/day and in the absence of any clear differences between sexes, the main experiment was undertaken as a limit test at 2000 mg/kg/day using only male mice.
DETAILS OF SLIDE PREPARATION:
At the time of sacrifice, all the animals were deeply anesthetized by an intraperitoneal injection of sodium pentobarbital, then killed by cervical dislocation. The femurs of the animals were removed and the bone marrow was flushed out using fetal calf serum. After centrifugation, the supernatant was removed and the cells in the sediment were resuspended by shaking. A drop of this cell suspension was placed and spread on a slide. The slides were air-dried and stained with Giemsa. The slides were coded so that the scorer is unaware of the treatment group of the slide under evaluation ("blind" scoring).
METHOD OF ANALYSIS:
For each animal, the number of the micronucleated polychromatic erythrocytes (MPE) was counted in 2000 polychromatic erythrocytes; the polychromatic (PE) and normochromatic (NE) erythrocyte ratio was established by scoring a total of 1000 erythrocytes (PE + NE).
The analysis of the slides was performed at CIT and the scoring was performed "blind". - Evaluation criteria:
- For a result to be considered positive, a statistically significant increase in the frequency of MPE must be demonstrated when compared to the
concurrent vehicle control group. Reference to historical data, or other considerations of biological relevance was also taken into account in the
evaluation of data obtained. - Statistics:
- Normality and homogeneity of variances will be tested using a Kolmogorov Smirnov test and a Bartlett test.
When normality and homogeneity of variances were demonstrated, the statistical comparisons was performed using a Student t-test (two groups) or a one-way analysis of variance (¿ 3 groups) followed by a Dunnett test (when necessary).
When normality or homogeneity of variances was not demonstrated, a Mann/Whitney test (two groups) or a Kruskall Wallis test (¿ 3 groups) was performed followed by a Dunn test (when necessary).
Results and discussion
Test results
- Sex:
- male
- Genotoxicity:
- negative
- Toxicity:
- yes
- Remarks:
- PE/NE ratio decreased
- Vehicle controls validity:
- valid
- Negative controls validity:
- not examined
- Positive controls validity:
- valid
- Additional information on results:
- Neither mortality, nor clinical signs were observed in any animals given 2000 mg/kg/day throughout the observation period.
The mean values of MPE of the vehicle control and positive control groups were within the corresponding historical control ranges. The cyclophosphamide induced a significant increase (p < 0.05) in the frequency of MPE, indicating the sensitivity of the test system under our experimental conditions. The study was therefore considered valid.
The PE/NE ratio of the vehicle control was found above the historical data range. This value is mainly due one out of five animals and it is considered not to impact on the validity of the test.
When compared to the vehicle control, the PE/NE ratio of the test item treated group decreased significantly (p < 0.05), showing that the bone marrow cells were effectively exposed to the test item.
The mean value of MPE in the group treated with the test item was found not different from that of the vehicle group.
Applicant's summary and conclusion
- Conclusions:
- The test item Di-tertio-butyl polysulfides (TPS 44) did not induce damage to the chromosomes or the mitotic apparatus of male mice bone marrow cells after two oral administrations, at a 24-hour interval, at the dose-level of 2000 mg/kg/day.
- Executive summary:
The potential of the test item Di-tertio-butyl polysulfides (TPS 44) to induce structural or numerical damage was evaluated in bone marrow cells of mice. The study was performed according to the international guidelines (OECD 474 and Commission Directive No. B12) and in compliance with the Principles of Good Laboratory Practice Regulations.
A preliminary toxicity test was performed to define the dose-levels to be used for the cytogenetic study. The top dose-level for the cytogenetic test was selected according to the criteria specified in the international guidelines; since no signs of toxicity were observed at 2000 mg/kg/day and in the absence of any clear differences between sexes, the main experiment was undertaken as a limit test at 2000 mg/kg/day using only male mice. In the main study, one group of five maleSwiss Ico: OF1 (IOPS Caw) mice received oral administrations of Di-tertio-butyl polysulfides (TPS 44) at the dose-level of 2000 mg/kg/day, over a 2-day period. One group of five males received the vehicle (0.5% aqueous carboxymethylcellulose) under the same experimental conditions, and acted as control group. One group of five males received the positive control test item (cyclophosphamide) once by oral route at the dose-level of 50 mg/kg/day. The animals of the treated and vehicle control groups were killed 24 hours after the last treatment and the animals of the positive control group were killed 24 hours after the single treatment. Bone marrow smears were then prepared. For each animal, the number of the micronucleated polychromatic erythrocytes (MPE) was counted in 2000 polychromatic erythrocytes. The polychromatic (PE) and normochromatic (NE) erythrocyte ratio was established by scoring a total of 1000 erythrocytes (PE + NE).
Neither mortality, nor clinical signs were observed in any animals given 2000 mg/kg/day throughout the observation period. The mean values of MPE of the vehicle control and positive control groups were within the corresponding historical control ranges. The cyclophosphamide induced a significant increase (p < 0.05) in the frequency of MPE, indicating the sensitivity of the test system under our experimental conditions. The study was therefore considered valid. When compared to the vehicle control, the PE/NE ratio of the test item treated group decreased significantly (p < 0.05), showing that the bone marrow cells were effectively exposed to the test item. The mean value of MPE in the group treated with the test item was found not different from that of the vehicle group.
Di-tertio-butyl polysulfides (TPS 44) did not induce damage to the chromosomes or the mitotic apparatus of male mice bone marrow cells after two oral administrations, at a 24-hour interval, at the dose-level of 2000 mg/kg/day.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.