Registration Dossier

Administrative data

First-aid measures

General information
Remove soiled or soaked clothing immediately
In case of accident or if you feel unwell, seek medical advice immediately.

After inhalation
When inhaled remove to fresh air and seek medical aid.

After contact with skin
In case of contact with skin wash off immediately with soap and water

After contact with eyes
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion
Get medical treatment
Do not induce vomiting

Fire-fighting measures

Suitable extinguishing media
foam
carbon dioxide
dry powder

Special hazards from the substance itself, its combustion products or from its vapours
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Nitrous gases (NOx)

Special protective equipment for firefighting
Use self-contained breathing apparatus

Accidental release measures

Personal precautions
Wear suitable personal protective equipment.

Environmental precautions
Do not allow to enter drains or waterways

Methods for cleaning up/taking up
Take up with absorbent material (eg sand, kieselguhr, universal binder)

Handling and storage

Advice on safe handling
Open and handle container with care.
Use only in well ventilated areas.

Advice on storage compatibility
Do not store together with oxidizing agents.

Further information on storage conditions
Keep container tightly closed in a well-ventilated place
Do not store at temperatures above 60 °C

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures
Avoid contact with eyes and skin

Hygiene measures
Observe the usual precautions when handling chemicals.

Respiratory protection :
Use respiratory protection in case of insufficient exhaust ventilation or prolonged exposure
Full mask to standard DIN EN 136
Combination filter A2 B2 E2 K2 Hg/P3, to standard DIN EN 371/372.
The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national regulations.

Hand protection :
For long-term exposure:
Butyl rubber gloves
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm


For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm


These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.


Eye protection :
safety glasses

Body protection :
protective clothing

Stability and reactivity

Thermal decomposition : > 350 °C (Heating rate : 3 K/min)
Method : DTA

Hazardous reactions
Reactions with strong oxidising agents.

Disposal considerations

Product
In accordance with local authority regulations, take to special waste incineration plant