Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General advice:
Remove/Take off immediately all contaminated clothing.
Get medical advice/ attention if you feel unwell.

If inhaled:
Remove to fresh air.

In case of skin contact:
In case of contact, immediately flush skin with soap and plenty of water.

In case of eye contact:
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Consult a physician.

If swallowed:
Rinse mouth with water.
If conscious, give the victim plenty of water to drink.
Get medical advice/ attention.

Most important symptoms and effects, both acute and delayed
Symptoms:
No symptoms known currently.

Risks:
No hazards known at this time.

Indication of any immediate medical attention and special treatment needed
Treatment:
Treat symptomatically.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
Water spray jet
Alcohol-resistant foam

Unsuitable extinguishing media:
Dry powder
Carbon dioxide (CO2)
High volume water jet

Special hazards arising from the substance or mixture
Specific hazards during firefighting:
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Carbon dioxide (CO2)

Advice for firefighters
Special protective equipment for firefighters:
Self-contained breathing apparatus Full protective suit

Further information:
Wear full protective clothing and self-contained breathing apparatus.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions:
Wear suitable protective clothing.
Ensure adequate ventilation.
Avoid dust formation.
Avoid contact with skin and eyes.

Environmental precautions:
If the product contaminates rivers and lakes or drains inform respective authorities.
Do not empty into drains.

Methods and material for containment and cleaning up
Methods for cleaning up:
Keep in suitable, closed containers for disposal.
Take up mechanically

Reference to other sections
For personal protection see section ‘Exposure controls/personal protection’. For disposal considerations see section ‘Disposal considerations’.

Handling and storage

Precautions for safe handling
Advice on safe handling:
Avoid dust formation.
Avoid dust accumulation in enclosed space.
Provide adequate ventilation.

Advice on protection against fire and explosion:
Dust can form an explosive mixture in air. Take measures to prevent the build up of electrostatic charge. Keep away sources of ignition. Keep away from heat.

Hygiene measures:
Use only in well-ventilated areas. Take off immediately all contaminated clothing.

Dust explosion class:
ST3 Capable of dust explosion

Conditions for safe storage, including any incompatibilities
Further information on storage conditions:
Keep containers tightly closed in a cool, well-ventilated place. Keep container dry.

Specific end use(s)
Specific use(s):
No further recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Exposure controls
Personal protective equipment
Eye protection:
Safety glasses

Hand protection
Remarks:
Protective gloves complying with EN 374. Minimum thickness (glove): not determined With solid dry substances permeation is not to be expected, therefore the breakthrough-time for this protective glove has not been measured.

Remarks:
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Skin and body protection:
Wear suitable protective clothing.

Respiratory protection:
Half mask with a particle filter P2 (EN 143)

Protective measures:
Avoid contact with skin and eyes.
Do not breathe dust.

Stability and reactivity

Reactivity
See section "Possibility of hazardous reactions".

Chemical stability
Stable under normal conditions.

Possibility of hazardous reactions
Hazardous reactions:
No dangerous reaction known under conditions of normal use.
Stable.

Conditions to avoid:
Keep away from heat.

Incompatible materials
Materials to avoid:
Not known

Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known.

Disposal considerations

Waste treatment methods
Product:
In accordance with regulations for hazardous waste, must be taken to a hazardous waste disposal site.

Contaminated packaging:
Regulations concerning reuse or disposal of used packaging materials must be observed.