Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

After inhalation:
Supply fresh air. If symptoms are experienced, get medical attention. In case of unconsciousness place patient stably in side position for transportation.

After skin contact:
Immediately rinse with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if irritation or skin rash occurs.

After eye contact:
Immediately rinse with plenty of water. Remove contact lenses if present and easy to do. Hold eyelids apart and flush eyes with plenty of cool low-pressure water for 15 minutes. Consult an ophtalmologist.

After swallowing:
Do not induce vomiting.
If person is conscious, rinse out mouth with water. Immediately call a doctor/physician.

Fire-fighting measures

Suitable extinguishing agents:
Carbon dioxide, foam, powder.

Hazardous thermal decomposition products: in case of fire, may release irritant and toxic fumes.

Special protective equipment for fire-fighters:
Firefighters should wear appropriate protective equipment and self-contained breathing apparatus.

Additional information: cool endangered receptacles with water spray.
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Personal precautions and protective equipment:
Wear personal protective equipment. Keep unprotected persons away.
Provide adequate ventilation.

Environmental protection:
Do not allow product to reach soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (soil, waterways, drains or sewers).

Methods and material for cleaning up/collecting:
- Small spills: Absorb spilled liquid with inert absorbent (e.g. sand, silica gel, acid binder, general purpose binder, sawdust). Collect and seal in an appropriate container properly labelled for disposal.
- Large spills: Stop spill if it can be done without danger. Dike. Pump as much liquid as possible with a pump. Absorb the remaining liquid with inert absorbent. Collect and seal in an appropriate container properly labelled for disposal.

Handling and storage

Precautions for safe handling:
Wear appropriate personal protective equipment. Provide adequate ventilation in the work place. Protect from heat and keep ignition sources away.

Conditions for safe storage:
Store if possible under cover in a cool well-ventilated location. Keep container tightly closed. Keep away from sources of ignition. Protect from heat and direct sunlight.

Transport information

Land transport (ADR/RID)

UN number:
Not classified as a dangerous good under transport regulation.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classified as a dangerous good under transport regulation.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified as a dangerous good under transport regulation.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified as a dangerous good under transport regulation.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures:
Provide local exhaust or general room ventilation to minimize exposure to vapours. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.

General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals. Emergency eye wash fountainsand safety showers should be available in the immediate vicinity of any potential exposure.Immediately remove all soiled and contaminated clothing.Avoid contact with eyes and skin.

Respiratory protection:
Use suitable respiratory protective device in case of insufficient ventilation.

Hand protection:
Protective gloves resistant to chemicals (standard EN 374-3).
They should be replaced immediately if there is any indication of degradation or chemical breakthrough.

Eye protection: safety glasses (standard EN 166)

Body protection: protective work clothing

Stability and reactivity

Reactivity:
No data from specific reactivity tests are available for this product or this class of product.

Chemical stability:
Product stable under storage and handling conditions according to specifications ("cf handling and storage").

Possibility of hazardous reactions:
No dangerous reactions known.

Conditions to avoid:
Keep away from heat and sources of ignition.

Materials to avoid:
Avoid contact with strong mineral acids.

Disposal considerations

Recommendation:
The product has to be disposed of in an authorised incinerator, according to regulation.

Uncleaned packaging:
Packaging has to be sent to an authorised waste treatment facility, for recycling or disposal.