Registration Dossier

Administrative data

First-aid measures

Inhalation:
Move exposed person to fresh air.Keep person warm and at rest.If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.Get medical attention if adverse health effects persist or are severe.If unconscious, place in recovery position and get medical attention immedi-ately.Maintain an open airway.Loosen tight clothing such as a collar, tie, belt or waistband.In case of inha-lation of decomposition products in a fire, symptoms may be delayed.The exposed person may need to be kept under medical surveillance for 48 hours.
Ingestion:
Wash out mouth with water.Move exposed person to fresh air.Keep person warm and at rest.If material has been swallowed and the exposed person is conscious, give small quantities of water to drink.Stop if the exposed person feels sick as vomiting may be dangerous.Do not induce vomiting unless directed to do so by medical personnel.If vomiting occurs, the head should be kept low so that vomit does not enter the lungs.Get medical attention if adverse health effects persist or are severe.Never give anything by mouth to an unconscious person.If unconscious, place in recovery position and get medical attention immedi-ately.Maintain an open airway.Loosen tight clothing such as a collar, tie, belt or waistband.
Skin contact:
Wash contaminated skin with soap and water.Remove contaminated clothing and shoes.Continue to rinse for at least 10 minutes.Get medical attention.In the event of any complaints or symptoms, avoid further exposure.Wash clothing before reuse.Clean shoes thoroughly before reuse.
Eye contact:
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids.Check for and remove any contact lenses.Continue to rinse for at least 10 minutes.Get medical attention if irritation occurs.

Fire-fighting measures

Extinguishing media
Suitable: In case of fire, use water spray (fog), foam, dry chemical or CO2.
Not suitable: None known. Never use water jet.
Special exposure hazards:
no specific fire or explosion hazard. Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire.No action shall be taken involving any personal risk or without suitable train-ing.This material is very toxic to aquatic organisms.Fire water contaminated with this material must be con-tained and prevented from being discharged to any waterway, sewer or drain.
Hazardous combustion products:
Decomposition products may include the following materials: carbon oxides, nitrogen oxides, sulfur oxides
Special protective equipment for fire-fighters:
Fire-fighters should wear appropriate protective equiment and selfcontained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Accidental release measures

Personal precautions:
No action shall be taken involving any personal risk or without suitable training.Keep unnecessary and unprotected personnel from entering.Do not touch or walk through spilt material.Provide adequate ventila-tion.Put on appropriate personal protective equipment (see EXPOSURE CONTROLS/PERSONAL PROTECTION).
Environmental precautions:
Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Large spill:
Move containers from spill area.Prevent entry into sewers, water courses, basements or confined ar-eas.Vacuum or sweep up material and place in a designated, labelled waste container.Dispose of via a licensed waste disposal contractor.
Small spill:
Move containers from spill area.Vacuum or sweep up material and place in a designated, labelled waste container.Dispose of via a licensed waste disposal contractor.

Handling and storage

Handling:
Put on appropriate personal protective equipment (see Exposure control/Personal protection). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Avoid release to the environment. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous.
Storage:
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and food and drink.Keep container tightly closed and sealed until ready for use.Containers that have been opened must be carefully resealed and kept upright to prevent leakage.Do not store in unlabelled containers.Use appropriate containment to avoid environmental contamination.
Packaging materials:
Recommended: Use original container.
Remarks: Avoid all possible sources of ignition (spark or flame). Take precautionary measures against electrostatic discharges.

Transport information

Land transport (ADR/RID)

UN number:
UN3077
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS, SUBSTANCE, SOLID, N.O.S.
Chemical name:
N-CYCLOHEXYL-2-BENZOTHIAZOLESULPHENAMIDE
Language:
English
Class:
9
Classification code:
-
Packaging group:
III
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN3077
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS, SUBSTANCE, SOLID, N.O.S.
Chemical name:
N-CYCLOHEXYL-2-BENZOTHIAZOLESULPHENAMIDE
Language:
English
Class:
9
Classification code:
-
Packaging group:
III
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN3077
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS, SUBSTANCE, SOLID, N.O.S.
Chemical name:
N-CYCLOHEXYL-2-BENZOTHIAZOLESULPHENAMIDE
Class:
9
Packaging group:
III
EmS code:
-
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN3077
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS, SUBSTANCE, SOLID, N.O.S.
Chemical name:
N-CYCLOHEXYL-2-BENZOTHIAZOLESULPHENAMIDE
Class:
9
Packaging group:
III
Remarksopen allclose all

Additional transport information

Additional transport information
Hazard identification number: 90
Limited quantity: LQ27

Exposure controls / personal protection

Exposure limit values: Not available.
Recommended monitoring procedures:
If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment.Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to chemical agents and national guidance documents for methods for the determination of hazardous substances.
Risk management measures - Occupational exposure controls:
Technical measures: If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits.
Risk management measures - Personal protection measures:
Respiratory protection:
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary.Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Recommended: In case of dust formation particle filter.
Hand protection:
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary.After contamination with product change the gloves immediately and dispose of them according to relevant national and local regulations <1 hours (breakthrough time): Nitrile rubber - NBR , Polyvinyl chloride - PVC , Polychloroprene - CR
Eye protection:
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. Recommended: Tightly fitting safety goggles.
Skin protection:
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Hygiene measures:
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.Appropriate techniques should be used to remove potentially contaminated clothing.Wash contaminated clothing before reusing.Ensure that eyewash stations and safety showers are close to the workstation location.

Stability and reactivity

Stability : The product is stable.
Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Decomposition temperature: >180°C
Conditions to avoid: Product of hydrolysis : cyclohexylamine
Hazardous decomposition products: Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Disposal considerations

Methods of disposal:
Examine possibilities for re-utilisation.Product residues and uncleaned empty containers should be packaged, sealed, labelled, and disposed of or recycled according to relevant national and local regulations.Where large quantities are concerned, consult the supplier.When uncleaned empty containers are passed on, the recipient must be warned of any possible hazard that may be caused by residues.For disposal within the EC, the appropriate code according to the European Waste List (EWL) should be used. It is among the tasks of the polluter to assign the waste to waste codes specific to industrial sectors and processes according to the European Waste List (EWL).