Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

On contact with eyes : No first aid should be needed.
On skin contact : No first aid should be needed.
If inhaled : Remove to fresh air.
On ingestion : No first aid should be needed.

Fire-fighting measures

Suitable extinguishing media : On large fires use AFFF alcohol compatible foam or water spray (fog). On small fires use
AFFF alcohol compatible foam, CO2 or water spray (fog). Water can be used to cool fireexposed containers.
Unsuitable extinguishing media : None known.
Hazards during fire fighting : Fire burns more vigorously than would be expected. Vapours are heavier than air and can travel along ground to remote ignition sources. Electrostatic charges may be generated during transfer of product from its container. Ensure that all equipment is electrically
earthed.Vapours may form explosive mixtures with air.
Hazardous Combustion Products : Thermal breakdown of this product during fire or very high heat conditions may evolve
the following decomposition products: Silica. Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.
Special protective equipment/procedures : A self-contained respirator and protective clothing should be worn. Determine the need to
evacuate or isolate the area according to your local emergency plan. Use water spray to keep fire exposed containers cool.

Accidental release measures

Personal precautions, protective equipment and emergency procedures : Wear proper protective equipment.
Environmental precautions : Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers.
Methods and materials for containment and cleaning up : Determine the need to evacuate or isolate the area according to your local emergency plan. Eliminate all possible sources of ignition. Very large spills should be contained by bunding, etc... procedures. Mop, wipe or soak up with absorbent material and place in a container with a lid. The spilled product produces an extremely slippery surface.

Handling and storage

Advice on safe handling : General ventilation is recommended. Local ventilation is recommended. Avoid eye contact. Do not breathe spray or mist. Do not breathe vapour.
Advice on storage : Store in a flameproof, well ventilated area. Electrostatic charges may be generated during transfer of product from its container. Ensure that all equipment is electrically earthed. Keep container tightly closed. Vapours may form explosive mixtures with air.
Storage temperature: minimum -40 °C, maximum 54 °C

Transport information

Land transport (ADR/RID)

UN number:
Not subject to ADR/RID.
Shippingopen allclose all
Class:
Not subject to ADR/RID.
Classification code:
Not subject to ADR/RID.
Packaging group:
Not subject to ADR/RID.
Labels:
Not subject to ADR/RID.
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not subject to ADR/RID.
Shippingopen allclose all
Class:
Not subject to ADR/RID.
Classification code:
Not subject to ADR/RID.
Packaging group:
Not subject to ADR/RID.
Labels:
Not subject to ADR/RID.
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not subject to IMDG code.
Proper shipping name and description:
Not subject to IMDG code.
Chemical name:
Not subject to IMDG code.
Class:
Not subject to IMDG code.
Packaging group:
Not subject to IMDG code.
EmS code:
Not subject to IMDG code.
Labels:
Not subject to IMDG code.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not subject to IATA regulations.
Proper shipping name and description:
Not subject to IATA regulations.
Chemical name:
Not subject to IATA regulations.
Class:
Not subject to IATA regulations.
Packaging group:
Not subject to IATA regulations.
Labels:
Not subject to IATA regulations.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection : Suitable respiratory protection should be worn if the product is used in large quantities, confined spaces or in other circumstances where the OEL may be approached or exceeded. A suitable respirator must be worn if the product is used in any circumstances where an
aerosol or mist may be generated, such as during spraying or similar activities. The choice of a filter type depends on the amount and type of chemical being handled inthe workplace. Regarding filter characteristics, contact your respiratory protection supplier.
Hand protection : Gloves are not normally required.
Eye/face protection : Safety glasses should be worn.
Skin protection : Protective equipment is not normally necessary.
Hygiene measures : Exercise good industrial hygiene practice. Wash after handling, especially before eating,
drinking or smoking.
Specific Environment risk management measures :
for industrial uses :
The following are applicable as a ‘best practice’:
Use of air emission abatement equipments such as incinerators and scrubbers
Treatment of effluent in biological waste water treatment plant
Consumer uses :
Standard municipal WWTP

Stability and reactivity

Reactivity : None known.Stability : Stable under normal usage conditions.
Possibility of hazardous reactions: None known.
Conditions to avoid : Eliminate all possible sources of ignition.
Materials to avoid : Can react with strong oxidising agents.
Hazardous decomposition products : Thermal breakdown of this product during fire or very high heat conditions may evolve
the following decomposition products: Silica. Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde.

Disposal considerations

Dispose of in accordance with local regulations. According to the European Waste Catalogue, Waste Codes are not product specific, but application specific. Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.