Registration Dossier

Administrative data

First-aid measures

INHALATION
Remove to fresh air, treat symptomatically. Get medical attention.
SKIN CONTACT
Brush off excess powder. Flush affected area with water. Get medical attention. Contaminated leather articles such as shoes or belts must be discarded.
EYE CONTACT
Flush affected area with water. If symptoms develop, seek medical advice.Get immediate medical attention. Brush off excess powder. Immediately flush eye with water for at least 15 minutes while holding eyelids open.
INGESTION
Do not induce vomiting without medical advice. If conscious, washout mouth and give water to drink. If reflexive vomiting occurs, rinse mouth and repeat administration of water. Seek medical advice immediately, showing the label and/or SDS.
PROTECTION FOR FIRST AID PERSONNEL
Wear adequate personal protective equipment.

Fire-fighting measures

SUITABLE EXTINGUISHING MEDIA
Not expected to burn. Use extinguishing media appropriate for surrounding fire.

May form explosive dust-air mixtures. Dusts in sufficient concentration may be ignitable by static discharge. Empty product containers may contain product residue. Do not pressurize, cut, heat, weld, or expose containers to flame or other sources of ignition. May evolve oxides of carbon (COx) under fire conditions. May evolve oxides of nitrogen (NOx) under fire conditions.

In the event of a spill, prevent material and fire water from entering sewers or waterways.

Advice for firefighters:
In case of fire, wear a full face positive-pressure self contained breathing apparatus and protective suit.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
ADVICE FOR NON-EMERGENCY PERSONNEL
This material may be hazardous by contact, do not attempt to clean up the spill. Call trained emergency responders immediately. Clean up only tobe done by Emergency responders/personnel. Restrict access to area as appropriate until clean-up operations are complete. Use personal protective equipment recommended in Section 8 (Exposure Controls/Personal Protection).
ADVICE FOR EMERGENCY RESPONDERS
Restrict access to area as appropriate until clean-up operations are complete. Use personal protective equipment recommended in Section 8 (Exposure Controls/Personal Protection). Stop or reduce any leaks if it is safe to do so. Ventilate spill area if possible. Remove sources of ignition. Ensure clean-up is conducted by trained personnel only. Do not touch spilled material. Have emergency equipment (for fires, spills, leaks, etc.) readily available. Notify appropriate government, occupational health and safety and environmental authorities.
6.2 Environmental precautions:
In the event of a spill, prevent material from entering sewers or waterways. Do not allow material to contaminate ground water system. Prevent product from entering drains. If drains, streams, soil or sewers become contaminated, notify local authority.
6.3 Methods and materials for containment and cleaning up:
Sweep up and shovel. Reclaim into recovery or salvage drums. Dispose of material in compliance with regulations indicated in Section 13 of Safety Data Sheet.

Handling and storage

HANDLING
Prevent contact with skin, eyes and clothing. Use with adequate ventilation. Avoid generating dusts. Keep the containers closed when not in use. Ensure all containers are labeled. Discard contaminated shoes, belts and other articles made of leather. Empty product containers may contain product residue. Do not pressurize, cut, heat, weld, or expose containers to flame or other sources of ignition. Do not use, store, spill or pour near heat, sparks or open flame. Use personal protective equipment recommended in Section 8 of the Safety Data Sheet.
HYGIENE RECOMMENDATIONS
Use good work and personal hygiene practices to avoid exposure. Keep an eye wash fountain available. Keep a safety shower available. Always wash thoroughly after handling chemicals. When handling this product never eat, drink or smoke.
STORAGE CONDITIONS
Store in suitable labeled containers. Store the containers tightly closed. Keep in dry place. Store away from heat and sources of ignition. Connections must be grounded to avoid electrical charges.
SUITABLE CONSTRUCTION MATERIAL
Shipping and long term storage compatibility with construction materials can vary; we therefore recommend that compatibility is tested prior to use.

Transport information

Land transport (ADR/RID)

UN number:
Not classified.
Language:
English
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classified.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters:
OCCUPATIONAL EXPOSURE LIMITS
This substance does nopt have an established exposure limit.
8.2 Exposure controls:
ENGINEERING MEASURES:
General ventilation is recommended. The use of local exhaust ventilation is recommended to control emissions near the source. Laboratory samples should be handled in a fumehood. Provide mechanical ventilation of confined spaces.
PERSONAL PROTECTIVE EQUIPMENT
GENERAL ADVICE
The use and choice of personal protection equipment is related to the hazard of the product, the workplace and the way the product is handled. In general, we recommend as a minimum precaution that safety glasses with side-shields and workclothes protecting arms, legs and body be used. In addition any person visiting an area where this product is handled should at least wear safety glasses with side-shields.
EYE/FACE PROTECTION
When handling this product, the use of splash chemical goggles is recommended. The applicable European standard can be found in EN 166.
SKIN PROTECTION
When handling this product, the use of chemical gauntlets is recommended. The choice of work glove depends on work conditions and what chemicals are handled, but we have positive experience under light handling conditions using gloves made from Neoprene Natural rubber Nitrile Gloves should be replaced immediately if signs of degradation are observed. Breakthrough time not determined as preparation, consult PPE manufacturers. The applicable European standard can be found in EN 374.
When handling this product, the use of overalls, a chemical resistant apron and rubber boots is recommended. The applicable European standard can be found in EN 14605 and EN ISO 20345.
RESPIRATORY PROTECTION
If dusts are generated, use an approved air-purifying respirator. A suitable filter material depends on the amount and type of chemicals being handled. Consider the use of filter type: P The applicable European standard can be found in EN 140, EN 137, EN 143 and EN 14387. In event of emergency or planned entry into unknown concentrations a positive pressure, full-facepiece SCBA should be used. If respiratory protection is required, institute a complete respiratory protection program including selection, fit testing, training, maintenance and inspection.
ENVIRONMENTAL EXPOSURE CONTROLS
Consider the provision of containment around storage vessels.

Stability and reactivity

Reactivity:
No data available.
Chemical stability:
Stable under normal conditions.
Possibility of hazardous reactions:
Hazardous polymerization will not occur.
Conditions to avoid:
Heat and sources of ignition including static discharges. Moisture Avoid generating dusts.
Incompatible materials:
Contact with strong oxidizers (e.g. chlorine, peroxides, chromates, nitric acid, perchlorate, concentrated oxygen, permanganate) may generate heat, fires, explosions and/or toxic vapors.
Hazardous decomposition products:
Under fire conditions:
Oxides of carbon, Oxides of nitrogen

Disposal considerations

Waste treatment methods:
Dispose of wastes in an approved incinerator or waste treatment/disposal site, in accordance with all applicable regulations. Do not dispose of wastes in local sewer or with normal garbage. This product is ashless and can be burned directly in appropriate equipment. Any chemical waste is a potential environmental pollutant and is NOT suitable for disposal via ground, municipal sewers, drains, natural streams or rivers.
Empty drums should be taken for recycling, recovery, or disposal through a suitably qualified or licensed contractor.
EUROPE WASTE CODE:
16 03 03* - OFF SPECIFICATION BATCHES AND UNUSED PRODUCTS - Inorganic wastes containing dangerous substances. If this product is used in any further processes, the final user must redefine and assign the most appropriate European Waste Catalogue Code.