Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 208-654-0 | CAS number: 537-00-8
Guidance on Safe Use
Administrative data
First-aid measures
DESCRIPTION OF FIRST AID MEASURES
- After inhalation: Supply fresh air and seek medical treatment in case of complaints.
- After skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
- After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
- After swallowing: If swallowed, rinse mouth with water (only if the person is conscious). Drink plenty of water and provide fresh air. Call for a doctor immediately.
- Information for doctor: Treat symptomatically.
Fire-fighting measures
EXTINGUISHING MEDIA
- Suitable extinguishing agents: Carbon dioxide, Water spray, Fire-extinguishing powder and Foam.
SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
- In case of fire, the following can be released: Carbon monoxide and carbon dioxide and toxic metal oxide smoke
ADVICE FOR FIREFIGHTERS
- No special measures required
Accidental release measures
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
- Wear protective equipment and keep unprotected persons away.
- Avoid formation of dust.
- Ensure adequate ventilation.
ENVIRONMENTAL PRECAUTIONS
- Damp down dust with water spray.
- Keep contaminated washing water and dispose of appropriately.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP
- Pick up mechanically.
- Avoid formation of dust.
- Send for recovery or disposal in suitable receptacles.
- Neutralise residues on floor with solid sodium carbonate.
Handling and storage
PRECAUTIONS FOR SAFE HANDLING
- Wear protective clothing.
- Prevent formation of dust.
- Provide suction extractors if dust is formed.
INFORMATION ABOUT FIRE- AND EXPLOSION PROTECTION
- Keep away from combustible material.
- Protect from heat.
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles:
- Store in cool, dry conditions in well sealed receptacles.
Information about storage in one common storage facility:
Do not store together with alkalis (caustic solutions).
- Store away from oxidizing agents.
Further information about storage conditions: Keep container tightly sealed.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Additional information about design of technical facilities: Ensure good ventilation/exhaustion at the workplace.
CONTROL PARAMETERS
- Ingredients with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
EXPOSURE CONTROLS AND PERSONAL PROTECTIVE EQUIPMENT
- General protective and hygienic measures: Keep away from foodstuffs, beverages and food. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
- Respiratory protection: Not necessary if room is well-ventilated, but use suitable respiratory protective device when high concentrations are present.
- Recommended filter device for short term use: Filter P2 and Filter FFP2.
- Protection of hands: Protective gloves – Butyl rubber (BR), Nitrile rubber (NBR). Penetration time of glove material - Value for the permeation: Level ≥ 480 min. (EN 374). The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Eye protection: Safety glasses
- Body protection: Protective work clothing
Stability and reactivity
- Thermal decomposition / conditions to be avoided: No decomposition if used and stored according to specifications.
- Possibility of hazardous reactions: Reacts with strong alkali.
- Conditions to avoid: No further relevant information available.
- Incompatible materials: Alkali (lyes), concentrated. Strong oxidising agents.
- Hazardous decomposition products: In case of heat, the following can be released: Vapour of acetic acid
Disposal considerations
WASTE TREATMENT METHODS
- Recommendation: Contact manufacturer for recycling information. Disposal must be made according to official regulations.
- Waste disposal key: 51540 (ÖNORM S 2100)
European waste catalogue 06 03 14
- Uncleaned packaging recommendation: Empty contaminated packaging thoroughly. They may be recycled after thorough and proper cleaning. Packaging that may not be cleaned is to be disposed of in the same manner as the product.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
