Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 207-889-6 | CAS number: 499-75-2
Guidance on Safe Use
Administrative data
First-aid measures
- General advice:
In all cases of doubt, or when symptoms persist, seek medical attention.
- Following inhalation:
Seek fresh air immediately. If breathing is difficult, seek medical advice.
- Following skin contact:
Remove contaminated clothing. Wash affected areas with plenty of soap and water. If irritation develops, seek medical advice.
- Following eye contact:
Flush with water for at least 15 minutes. If irritation develops, get medical attention.
- Following ingestion:
Drink lots of water to dilute substance. Get medical attention immediately or contact a poison control center for advice.
- Most important symptoms and effects:
Inhalation: Choking, drowsiness, respiratory disruptions.
Eye contact: Irritation, reddening.
Skin contact: Irritation, stinging.
Ingestion: Queasiness, stomach aches.
Fire-fighting measures
- Suitable extinguishing media:
CO2, extinction powder or foam.
- Unsuitable extinguishing media:
Do not use water directly.
- Special hazards arising from the substance or mixture:
Development of hazardous combustion gases or vapours possible in the event of fire.
Hazardous decomposition products: carbon dioxide, carbon monoxide, acrid fumes.
- Advice for fire fighter:
Do not stay in dangerous zone without self-contained breathing apparatus.
In order to avoid contact with skin, keep a safety distance and wear suitable protective clothing.
Prevent fire extinguishing water from contaminating surface water or the ground water system.
Accidental release measures
- Personal precautions:
Ensure adequate ventilation. Do not breathe vapour/spray.
- Protective equipment and emergency procedures:
Wear protective clothing. Avoid contact with the eyes and skin.
- Environmental precautions:
Do not allow the substance or solutions of the substance to be discharged into lakes, steams, ponds or public waters.
- Methods and material for containment and cleaning up:
Small spill: absorb with inert material and put the spilled material in an appropriate waste disposal.
Large spill: absorb with inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by
spreading water on the contaminated surface and allow evacuating through the sanitary system.
Handling and storage
- Precautions for safe handling:
Apply according to good manufacturing and industrial hygiene practices with proper ventilation.
Do not drink, eat or smoke while handling. Respect good personal hygiene.
Normal measures for preventive fire protection.
- Conditions for safe storage, including any incompatibilities:
Store in cool, dry and ventilated area away from heat sources and protected from light in tightly closed original
container. Keep air contact to a minimum.
Keep away from sources of ignition and flames.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Appropriate engineering controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Personal protective equipment:
Eye and face protection: Sufficient eye protection must be worn. Wear glasses with side protection.
Skin protection: Wear standard industrial type rubber gloves. A rubber apron is recommended when
handling the material for extended periods of time.
Respiratory protection: Use respiratory protection with high concentrations.
Thermal hazards: Not available.
Environmental exposure controls:
Do not allow material to be released to the environment.
Industrial hygiene:
Handle in accordance with good industrial hygiene and safety practice.
Wash hands before breaks and at the end of workday.
Stability and reactivity
1. Reactivity
No information available.
2. Chemical stability
Stable under recommended storage conditions.
3. Possibility of hazardous reactions
No dangerous reactions known.
4. Conditions to avoid
Prolonged or excessive heat and/or exposure to air may cause on-hazardous decomposition and/or oxidation of the substance.
5. Incompatible materials
Avoid contact with strong acids, strong bases, and materials that react with oxygenated terpenes.
6. Hazardous decomposition products
Hazardous decomposition products: carbon dioxide, carbon monoxide, acrid fumes.
Disposal considerations
Respect the local or national norms about elimination of residues and packages.
Appropriate elimination method : whenever possible, it is better to recycle than deposing or incinerating.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
