Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 205-581-6 | CAS number: 143-06-6
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Eye irritation
Administrative data
- Endpoint:
- eye irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2016-08-18 to 2016-08-18
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 017
- Report date:
- 2017
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 437 (Bovine Corneal Opacity and Permeability Test Method for Identifying i) Chemicals Inducing Serious Eye Damage and ii) Chemicals Not Requiring Classification for Eye Irritation or Serious Eye Damage)
- Deviations:
- no
- Remarks:
- No deviations from the study plan were observed.
- Qualifier:
- according to guideline
- Guideline:
- EU method B.47 (Bovine corneal opacity and permeability test method for identifying ocular corrosives and severe irritants)
- Deviations:
- no
- Remarks:
- No deviations from the study plan were observed.
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- (6-aminohexyl)carbamic acid
- EC Number:
- 205-581-6
- EC Name:
- (6-aminohexyl)carbamic acid
- Cas Number:
- 143-06-6
- Molecular formula:
- C7H16N2O2
- IUPAC Name:
- (6-aminohexyl)carbamic acid
Constituent 1
- Specific details on test material used for the study:
- STABILITY AND STORAGE CONDITIONS OF TEST MATERIAL
- Storage condition of test material: Room Temperature (20 ± 5°C), Keep away from humidity
- Stability under test conditions: H2O: unstable; EtOH: not stated; acetone: not stated; CH3CN: not stated; DMSO: not stated
- Solubility and stability of the test substance in the solvent/vehicle: Test material was tested directly, without dilution or preparation of a solution.
FORM AS APPLIED IN THE TEST (if different from that of starting material) : white powder
Test animals / tissue source
- Species:
- cattle
- Strain:
- other: Bos primigenius Taurus
- Remarks:
- fresh bovine corneas
- Details on test animals or tissues and environmental conditions:
- TEST ANIMALS
- Source: Fresh bovine eyes were obtained from the slaughterhouse Müller Fleisch GmbH (Enzstr. 2-4, 75217 Birkenfeld, Germany)
- Age at study initiation: cattle were between 12 and 60 months old.
- Transportation: The eyes were transported to the test facility in Hank’s balanced salt solution (supplemented with 0.01% streptomycin and 0.01% penicillin). Then, the corneas were dissected and incubated in medium at 32 ± 1 °C in an incubation chamber for 1 h.
Test system
- Vehicle:
- unchanged (no vehicle)
- Remarks:
- Test material tested directly, without dilution or preparation of a solution.
- Controls:
- yes, concurrent positive control
- yes, concurrent negative control
- Amount / concentration applied:
- TEST MATERIAL
- Amount(s) applied (volume or weight with unit):
Tissue 1: 98.7 mg
Tissue 2: 106.0
Tissue 3: 99.6 - Duration of treatment / exposure:
- Exposure time on the corneas was 3 hours and 55 minutes at 32 ± 1°C
- Duration of post- treatment incubation (in vitro):
- 85 min at 32 ± 1°C
- Number of animals or in vitro replicates:
- 3
- Details on study design:
- SELECTION AND PREPARATION OF CORNEAS
After having carefully cleaned and sterilised the cornea holders, they were kept in the incubation chamber at 32 ± 1°C. On the day of the assay, the Minimum Essential Medium (MEM) without phenol red was supplemented with sodium bicarbonate, L-glutamine and 1% fetal calf serum (= complete MEM) and stored in a water bath at 32 ± 1°C. The same was performed with the MEM with phenol red, but without addition of sodium bicarbonate.
QUALITY CHECK OF THE ISOLATED CORNEAS
After the arrival of the corneas, they were examined and only corneas which were free from damage were used. The corneas were excised with a scalpel and cut from the globe with a 2-3 mm ring of sclera around the outside. Each cornea was transferred to a cornea holder in which pre-warmed cMEM (32 ± 1 °C) without phenol red was filled. The holders were then incubated for 1 hour in the incubation chamber at 32 ± 1°C.
NUMBER OF REPLICATES
3
NEGATIVE CONTROL USED
HBSS- solution: Hank’s Balanced Salt Solution (HBSS) 10-fold concentrated, diluted in demin. water (1:10), added Penicillin 100 IU/mL-Streptomycin 100µg/mL- solution (1%), batch no.: 20160818
POSITIVE CONTROL USED
Imidazole solution: 20% C3H4N2 (CAS-No. 288-32-4), dissolved in HBSS-solution., batch no.: 20160818
APPLICATION DOSE AND EXPOSURE TIME
The following amounts of the test item were tested neat and applied directly on the cornea using a weighing funnel:
1: 98.7 mg
2: 106.0 mg
3: 99.6 mg
Exposure time on the corneas was 3 hours and 55 minutes at 32 ± 1°C.
TREATMENT METHOD: open chamber
POST-INCUBATION PERIOD: yes (85 min at 32 ± 1°C)
REMOVAL OF TEST SUBSTANCE
- Number of washing steps after exposure period: 2 (After thorough rinsing with cMEM with phenol red and final rinsing with cMEM without phenol red, both chambers were filled with cMEM without phenol red, and the final opacity value of each cornea was recorded. The cMEM without phenol red was then removed from the front chamber, and 1 mL sodium fluorescein solution (concentration: 5 mg/mL) was added to the front chamber.
METHODS FOR MEASURED ENDPOINTS:
- Corneal opacity: The change of opacity value of each treated cornea with the test material, positive control and negative control was calculated by subtracting the initial basal opacity from the post treatment opacity reading for each cornea. The average change in opacity of the negative control cornea was calculated and this value was subtracted from the change in opacity of each treated cornea with test material and positive control to obtain a corrected opacity.
Opacity = ((I0 / I) – b) / a)
Where:
a = 0.0251 and b = 0.9894 being Opacitometer-specific empirically determined variables
I0 = the empirically determined illuminance through a cornea holder with windows and medium, here: Io= 1063.9
I = the measured illuminance (unit: LUX)
- Corneal permeability: passage of sodium fluorescein dye measured with the aid of microtiter plate reader (OD492)
The corrected OD492 value of each cornea treated with test item and positive control was calculated by subtracting the mean negative control cornea value from the original permeability value for each cornea. The mean OD492 value for each treatment group (test item, positive control and negative control) was determined by averaging the final corrected OD492 values of the treated corneas for one treatment group.
SCORING SYSTEM: In Vitro Irritancy Score (IVIS)
The IVIS of each replicate of the negative control was calculated from the following equation: IVIS = opacity difference + (15 x corrected OD 492 ± 2 value).
The IVIS of each replicate of the positive control and of the test item were calculated from the following equation: IVIS = (opacity difference – mean opacity difference of the negative control) + [15 x (OD 492 ± 2 – mean OD 492 ± 2 of the negative control)]
DECISION CRITERIA: please specify if the decision criteria as indicated in the TG was used.
According to the guideline.
Results and discussion
In vitro
Results
- Irritation parameter:
- in vitro irritation score
- Run / experiment:
- Test Material Mean IVIS
- Value:
- ca. 27.41
- Vehicle controls validity:
- valid
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- ACCEPTANCE OF RESULTS:
- Acceptance criteria met for negative control: Values for negative controls were within the range of historical data of the test facility. Therefore, the test system was acceptable.
- Acceptance criteria met for positive control: Values for positive controls were within the range of historical data of the test facility. Therefore, the test system was acceptable.
- Range of historical values if different from the ones specified in the test guideline: No
Any other information on results incl. tables
Table 2. Illuminance Values |
|||||||||
Parameter |
Negative Control |
Test Item |
Positive Control |
||||||
(I) Measured values before exposition |
1020 |
961 |
1001 |
1050 |
1017 |
1012 |
1020 |
978 |
1006 |
(I) Measured values after exposition |
966 |
907 |
948 |
704 |
597 |
679 |
397 |
330 |
370 |
Table 3. Opacity Values |
|||||||||
Parameter |
Negative Control |
Test Item |
Positive Control |
||||||
Opacity before exposition |
2.14 |
4.69 |
2.93 |
0.95 |
2.26 |
2.47 |
2.14 |
3.92 |
2.72 |
Opacity after exposition |
4.46 |
7.31 |
5.29 |
20.79 |
31.58 |
23.01 |
67.35 |
89.03 |
75.14 |
Opacity Difference |
2.32 |
2.63 |
2.37 |
19.84 |
29.32 |
20.54 |
65.21 |
85.10 |
72.42 |
Mean Opacity Difference |
2.44 |
- |
- |
||||||
Opacity Difference corrected |
- |
17.40 |
26.88 |
18.10 |
62.77 |
82.67 |
69.99 |
Table 5. Optical density at 492 nm |
|||||||||
Parameter |
Negative Control |
Test Item |
Positive Control |
||||||
1. Measurement |
0.073 |
0.049 |
0.052 |
0.639 |
0.480 |
0.374 |
0.462 |
0.530 |
0.860 |
2. Measurement |
0.073 |
0.045 |
0.056 |
0.644 |
0.478 |
0.371 |
0.461 |
0.531 |
0.865 |
3. Measurement |
0.075 |
0.044 |
0.049 |
0.643 |
0.479 |
0.377 |
0.467 |
0.531 |
0.850 |
1. Measurement - Blank |
0.0393 |
0.0153 |
0.0183 |
0.6053 |
0.4463 |
0.3403 |
0.4283 |
0.4963 |
0.8263 |
2. Measurement - Blank |
0.0393 |
0.0113 |
0.0223 |
0.6103 |
0.4443 |
0.3373 |
0.4273 |
0.4973 |
0.8313 |
3. Measurement - Blank |
0.0413 |
0.0103 |
0.0153 |
0.6093 |
0.4453 |
0.3433 |
0.4333 |
0.4973 |
0.8163 |
Mean of each replicate |
0.0400 |
0.0123 |
0.0187 |
0.6083 |
0.4453 |
0.3403 |
0.4297 |
0.4970 |
0.8247 |
Mean of the three replicates |
0.0237 |
- |
- |
||||||
Corrected |
- |
0.5847 |
0.4217 |
0.3167 |
2.1247* |
2.4613* |
4.0997* |
* Note: The three values for the positive control were obtained by measurement of a fivefold diluted
solution and multiplication of the absorbances with factor 5.
Table 6. IVIS Values |
|||
Test Group |
IVIS |
Mean IVIS |
Relative Standard Deviation IVIS |
Negative Control HBSS-solution |
2.92 |
2.79 |
4.96% |
2.81 |
|||
2.65 |
|||
|
|||
Test Item INTERCURE®1 |
26.17 |
27.41 |
19.29% |
33.21 |
|||
22.85 |
|||
|
|||
Positive Control 20% imidazole solution |
94.64 |
115.24 |
16.31% |
119.59 |
|||
131.48 |
Applicant's summary and conclusion
- Interpretation of results:
- other: Category 2 (irritating to eyes) based on CLP criteria
- Conclusions:
- The calculated IVIS for the test material was 27.41. Under the conditions of this study, the test material showed effects on the cornea of the bovine eye in vitro but does not meet the GHS classification criteria for eye damage.
- Executive summary:
A key Guideline (OECD 437) in vitro eye irritation/corrosion study was performed to assess the potential of the test material (INTERCURE®1) to cause corneal damage by quantitatively measuring changes in opacity and permeability in bovine cornea post exposure.
The test material was brought onto the cornea of a bovine eye which had been incubated with cMEM without phenol red at 32 ± 1°C for 1 hour and whose opacity had been measured. The test material incubated on the cornea for 3 hours and 55 minutes at 32 ± 1°C. After removal of the test material, opacity and permeability values were measured. HBSS-solution was used as the negative control while 20% Imidazole solution was used as the positive control in this study.
The negative control showed no irritating effect on the cornea and the calculated IVIS (in vitro irritancy score) was 2.79. The positive control induced serious eye damage on the cornea and was within two standard deviations of the historical mean. The calculated IVIS for the positive control was 115.24. The calculated IVIS for the test material was 27.41.
According to OECD Guideline no. 437 (Jul. 2013), a substance with an IVIS > 3 and ≤ 55 induces effects on the cornea, that cannot be classified in a UN GHS Category for eye damage. Therefore, under the conditions of this study, the test material showed effects on the cornea of the bovine eye in vitro but does not meet the GHS classification criteria for eye damage.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.