Registration Dossier

Administrative data

First-aid measures

Description of first aid measures

Eye contact:
flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention.

Skin contact:
wash with soap and water. If signs/symptoms develop, get medical attention.

Inhalation:
no need for first aid is anticipated.

If swallowed:
rinse mouth. If you feel unwell, get medical attention.

Most important symptoms and effects, both acute and delayed:
see MSDS Section 11.1 Information on toxicological effects

Indication of any immediate medical attention and special treatment required:
not applicable

Fire-fighting measures

Extinguishing media:
product is a fire-extinguishing agent.

Special hazards arising from the substance or mixture:
exposure to extreme heat can give rise to thermal decomposition.

Hazardous Decomposition or By-Products:
Substance Condition
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Hydrogen Fluoride During Combustion
Toxic Vapor, Gas, Particulate During Combustion


Advice for fire-fighters:
when fire fighting conditions are severe and total thermal decomposition of the product is possible, wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
ventilate the area with fresh air. Refer to other sections of the MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.

Environmental precautions:
avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water.

Methods and material for containment and cleaning up:
contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a toxic, corrosivity or flammability hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS. Seal the container. Dispose of collected material as soon as possible.

Reference to other MSDS sections:
refer to Section 8 and Section 13 for more information

Handling and storage

Precautions for safe handling:
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. For industrial or professional use only. Do not use in a confined area or areas with little or no air movement.
Conditions for safe storage including any incompatibilities:
store away from heat. Store away from other materials. Protect from sunlight. Store in a well-ventilated place.

Specific end use(s):
See information in MSDS Section 7.1 and 7.2 for handling and storage recommendations. See MSDS Section 8 for exposure controls and personal protection recommendations.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Disposal considerations