Registration Dossier

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
March 2013
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
Principles of method if other than guideline:
Not Applicable
GLP compliance:
no
Remarks:
The data contained in this report has been generated in a laboratory holding a current statement of GLP Compliance, issued by the UK GLP Monitoring Authority, MHRA, but not as part of a formal GLP study.
Parameter:
lower explosion limit
Remarks on result:
other: N/A
Parameter:
upper explosion limit
Remarks on result:
other: N/A
Type of aerosol tested:
aerosol dispenser: not specified
Remarks:
or specified in description of method (migrated information)
Test parameter:
ignition distance (cm)
Remarks:
original parameter: flame extension (cm) (migrated information)
Remarks on result:
other: N/A
Type of aerosol tested:
aerosol dispenser: not specified
Remarks:
or specified in description of method (migrated information)
Test parameter:
maximum flame height (cm)
Remarks:
original parameter: flame projection (cm) (migrated information)
Remarks on result:
other: N/A
Test procedure:
burning time (test type not further specified)
Remarks:
or specified in description of method (migrated information)
Remarks on result:
other: N/A
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record. | Remarks: | Additional remarks: N/A
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record. | Remarks: | Additional remarks: N/A
Remarks on result:
no reaction with water observed
Remarks:
corresponding to 'no' in migrated source record.| Remarks:The substance should not be considered as highly flammable and no further testing is required | Additional remarks: See Report
Interpretation of results:
non flammable
Remarks:
Migrated information The substance should not be considered as highly flammable and no further testing is required
Conclusions:
The material ignited briefly but did not hold or propagate flame either by burning with flame or smoldering along 200 mm of the powder train within the four minutes test period. The substance should not be considered as highly flammable and no further testing is required.

Description of key information

The material ignited briefly but did not hold or propagate flame either by burning with flame or smoldering along 200 mm of the powder train within the four minutes test period.  The substance should not be considered as highly flammable and no further testing is required.

Key value for chemical safety assessment

Flammability:
non flammable

Additional information

Justification for classification or non-classification