Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 230-811-7 | CAS number: 7328-17-8
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- March - May 2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- comparable to guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 121 (Estimation of the Adsorption Coefficient (Koc) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC))
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.19 (Estimation of the Adsorption Coefficient (KOC) on Soil and Sewage Sludge Using High Performance Liquid Chromatography (HPLC))
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- HPLC estimation method
- Media:
- soil/sewage sludge
- Specific details on test material used for the study:
- Test Item Name: MIRAMER M170
Chemical Name: Ethoxy ethoxy ethyl acrylate
CAS No. 7328-17-8
Lot No: 151210177
Description: Clear colorless liquid
Storage Conditions: Room temperature, in the dark
Purity: 95.49% - Radiolabelling:
- no
- Test temperature:
- 40 degree celcius
- Details on study design: HPLC method:
- The determination was performed using the HPLC screening method, a procedure designed to be compatible with Method C.19 Adsorption Coefficient of Commission Regulation (EC) No 440/2008 of 30 May 2008 and Method 121 of the OECD Guidelines for Testing of Chemicals, 22 January 2001.
A high performance liquid chromatograph (HPLC) and a commercially available cyanopropyl reverse phase HPLC column, containing lipophilic and polar moieties, were used for the test.
The dead time was determined by measuring the retention time of formamide (purity*99.94%, 609 mg/L solution in 55:45 (v/v) methanol:purified water).
Test item (0.1007 g) was diluted to 100 mL with methanol. The solution was then diluted by a factor of 2 with methanol to give a concentration of 504 mg/L.
The sample, dead time and reference standard solutions were injected in duplicate using the following HPLC parameters:
HPLC System : Agilent Technologies 1100 series, incorporating autosampler and workstation
Column : Waters XSelect HSS CN, 5 μm, 100 Å (150 x 4.6 mm)
Column temperature : 40 ºC
Mobile phase : 55:45 (v/v) methanol:purified water pH of mobile phase : 6.40
Flow rate : 1.0 mL/min
Injection volume : 10 μL
UV detector wavelength : 210 nm - Analytical monitoring:
- not specified
- Details on test conditions:
- - Experimental Conditions for Chromatography:
The following conditions were established using a Waters Alliance 2695 liquid HPLC and
Waters 2487 Dual λ UV detector:
Column: Zorbax SB-CN, 75 x 4.6 mm, 3.5 μm
Mobile Phase: 55/45 (v/v) Methanol/Milli-Q water (pH of Milli-Q water
determined to be 5.76)
Flow Rate: 1.0 mL/min
Run Time: 20 min
Detection: UV at 210 nm
Column Temperature: 25°C (Actual recorded temperature = 24.8°C)
Injection Volume: 10 μL (test mixes and standard mix)
1 μL (stock standard and stock test item solutions)
Data Handling: Thermo LabSystems Atlas 2002, Release 1
- Analysis of Samples:
Duplicate injections (1 μL) of each stock reference compound and individual injections of
each stock test item solutions were performed. Single injections (50 μL) of the mixed
reference compounds and both mixed test item solutions A and B were performed employing
the conditions described above. - Key result
- Sample No.:
- #1
- Type:
- log Koc
- Value:
- < 1.25 dimensionless
- pH:
- 6.4
- Temp.:
- 40 °C
- Matrix:
- Waters XSelect HSS CN, 5 μm, 100 Å (150 x 4.6 mm); Particle Substrate Silica
- Remarks on result:
- not measured/tested
- Details on results (HPLC method):
Equation of calibration plot: y = 0.3911x – 0.9093
Correlation coefficient of calibration plot = 0.9714
Slope of line meets column function acceptance in OECD 121 where:
If Log KOC = 3.0; log k' = 0.264
If Log KOC = 2.0; log k' = -0.127- Validity criteria fulfilled:
- yes
- Conclusions:
- The adsorption coefficient (Koc) of M170 has been determined to be less than 17.8, log10 Koc less than 1.25.
- Executive summary:
The calibration curve for the reference items showed good first order correlation (R = 0.9646) and the retention times between duplicate injections for each solution were consistent, indicating that the HPLC method was valid for the estimation of the adsorption coefficient of the test item. pH may have a significant influence on sorption behavior, in particular for ionizable substances. However, since the test item does not present any dissociating functional groups within the environmentally relevant pH range of 5.5 to 7.5, no manipulation of the mobile phase pH was necessary to ensure testing of the test item in its unionized form. Therefore, only a single evaluation with the mobile phase at approximately neutral pH was performed.
The adsorption coefficient (Koc) of the test item has been determined to be less than 17.8, log10 Koc less than 1.25. The mobility of the test item can therefore be classified as very high.
Reference
Mean retention time, k' factor, adsorption coefficients for reference compounds
Reference |
Mean Retention Time (min) |
Capacity Factor (k') |
Log10 k' |
Log10 Koc* |
Acetanilide |
2.604 |
0.325 |
-0.488 |
1.25 |
Phenol |
2.512 |
0.278 |
-0.556 |
1.32 |
Atrazine |
3.506 |
0.784 |
-0.106 |
1.81 |
Isoproturon |
3.71 |
0.888 |
-5.18E-02 |
1.86 |
Triadimenol |
4.886 |
1.49 |
0.172 |
2.4 |
Linuron |
4.985 |
1.54 |
0.187 |
2.59 |
Naphthalene |
4.407 |
1.24 |
9.42E-02 |
2.75 |
Endosulfan-diol |
6.13 |
2.12 |
0.326 |
3.02 |
Fenthion |
7.058 |
2.59 |
0.413 |
3.31 |
Phenanthrene |
7.833 |
2.99 |
0.475 |
4.09 |
a-Endosulfan |
10.058 |
4.12 |
0.615 |
4.09 |
Diclofop-methyl |
10.639 |
4.41 |
0.645 |
4.2 |
DDT |
20.338 |
9.35 |
0.971 |
5.63 |
* Reference Compound Literature values taken from OECD Guideline 121
Determination of Adsorption Coefficient (KOC) Values for MIRAMER
M170
Injection |
Retention Time (min) |
Capacity Factor (k') |
log10(k') |
log10(KoC) |
Mean log10(Koc) |
Adsorption coefficient |
1 |
2.551 |
0.298 |
-0.526 |
<1.25 |
<1.25 |
<17.8 |
2 |
2.556 |
0.3 |
-0.522 |
<1.25 |
Description of key information
The adsorption coefficient (Koc) of the test item has been determined to be less than 17.8, log10 Koc less than 1.25. The mobility of the test item can therefore be classified as very high.
Key value for chemical safety assessment
- Koc at 20 °C:
- 17.8
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.