Registration Dossier

Environmental fate & pathways

Adsorption / desorption

Currently viewing:

Administrative data

Endpoint:
adsorption / desorption: screening
Type of information:
migrated information: read-across based on grouping of substances (category approach)
Adequacy of study:
key study
Study period:
Report date: 2012-11-13
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
other: Well documented study performed according to relevant guidelines.

Data source

Reference
Reference Type:
study report
Title:
Unnamed
Year:
2012
Report Date:
2012

Materials and methods

Test guideline
Qualifier:
according to
Guideline:
OECD Guideline 121 (Estimation of the Adsorption Coefficient (Koc) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC))
Deviations:
no
GLP compliance:
no
Type of method:
HPLC estimation method
Media:
soil/sewage sludge

Test material

Reference
Name:
Unnamed
Type:
Constituent

Study design

Test temperature:
Column temperature: 40 deg C

HPLC method

Details on study design: HPLC method:
Principle of the method:
HPLC is performed on analytical columns packed with commercially available cyanopropyl solid phase containing lipophilic and polar moieties. A moderately polar stationary phase based on silica matrix is used. While passing through the HPLC column along with the mobile phase the test substance interacts with the stationary phase. As a result of partitioning between mobile and stationary phases the test substance is retarded.

Procedure
The distribution coefficient was estimated by the HPLC method using isocratic elution. The HPLC system was calibrated for log k' versus log Koc using reference substances of known log Koc. Test substance was dissolved in tetrahydrofurane. Calibration solutions were prepared in acetonitrile.
Test substance solution: 10.7 mg in 3 ml tetrahydrofurane, filtered through 0.45 μm PTFE membrane filter.
Calibration solutions: approx. 2-13 µg/ml in acetonitrile
Dead time marker: sodium nitrate

Instrumental conditions
HPLC instrument: Agilent 1100
Injection volume: 2 μl test substance solution; 2 µl calibration solution; reference substances see table under "any other informations on materials and methods inc. tables"
Detector: UV, 220 nm
Column: μBondapak CN, 150 mm x 3.1 mm, 10 μm
Mobile phase: water/methanol = 45/55 (v/v)
Flow rate: 0.8 ml/min
Column temperature: 40 deg C

Evaluation of results performed according to the guideline.

Results and discussion

Adsorption coefficient
Type:
log Koc
Value:
5.3
Temp.:
40 °C
Remarks on result:
other: Determined by HPLC method, Column temperture 40 deg C

Results: HPLC method

Details on results (HPLC method):
Calibration line and evaluation:
From the calibration line log K' versus log Koc the following equation was calculated:
Y = 0.133x-0.0791, with R^2 = 0.9902

For the test substance, k' was determined as 4.28, log k' = 0.63

From this, the log Koc of the test substance was estimated as follows:

log Koc = (log(k') - b)/a = [0.63 - (-0.0791)]/0.1330 = 5.3

Any other information on results incl. tables

Analytical data:

Substance

log Koc
value

Inj. 1
t
R[min]

Inj. 2
t
R[min]

k'

log k'

mass on
column
[ng]

Sodium nitrate

---

1.007

1.008

---

---

20

Acetanilide

1.25

2.239

2.237

1.22

0.09

20

Phenol

1.32

2.235

2.234

1.22

0.09

16

Methylbenzoate

1.8

2.432

2.43

1.41

0.15

20

Carbendazim

2.35

2.883

2.9

1.87

0.27

*

Naphthalene

2.75

3.009

3.006

1.99

0.3

4

1,2,3-Trichlorobenzene

3.16

3.07

3.071

2.05

0.31

26

Phenanthrene

4.09

3.966

3.963

2.93

0.47

8

4,4'-DDT solution

(100 ng/μl)

5.63

5.721

5.704

4.67

0.67

10

Test substance

---

5.32

5.324

4.28

0.63

*

*: cannot be calculated due to undissolved parts of test substance

Applicant's summary and conclusion

Validity criteria fulfilled:
yes
Conclusions:
In a raliable study using the HPLC-method according to OECD 121 for estimating the adsorption coefficient Koc on soil and sewage sludge, for the test item a log Koc of 5.3 was determined. The calculated log Koc value of the test substance is within the calibrated range. 4,4'-DDT was the reference substance with highest log Koc value (5.63).
Executive summary:

The sorption behaviour (log Koc) of the test substance on soil and on sewage sludge was estimated using high performance liquid chromatography (HPLC) according to the OECD Guideline for the Testing of Chemicals 121 (2001; reliability category 1). 8 compounds with log Koc-values between 1.25 and 5.63 were used for calibration. From the capacity factor k' of 4.28 for the test item and the calibration curve a log Koc of 5.3 was determined. The calculated log Koc value of the test substance is within the calibrated range. 4,4'-DDT was the reference substance with highest log Koc value (5.63).