Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Inhalation:  Move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-tomouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case   of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.

Ingestion: Get medical attention immediately. Wash out mouth with water. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Skin contact: Wash contaminated skin with soap and water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.

Fire-fighting measures

Extinguishing media

Suitable: In case of fire, use water spray (fog), foam, dry chemical or CO2.

Not suitable: None known

Special exposure hazards: No specific fire or explosion hazard. Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. This material is very toxic to aquatic organisms. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.

Hazardous combustion products: Decomposition products may include the following materials: carbon oxides nitrogen oxides sulfur oxides

Special protective equipment for fire-fighters: Fire-fighters should wear appropriate protective equipment and selfcontained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Accidental release measures

Personal precautions: No action shall be taken involving any personal risk or without suitable training. Keep unnecessary and unprotected personnel

from entering. Do not touch or walk through spilt material. Provide adequate ventilation. Put on appropriate personal protective equipment (see section 8).

Environmental precautions: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Large spill: Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Vacuum or sweep up material and place in a designated, labelled waste container. Dispose of via a licensed waste disposal contractor. Note: see section 1 for emergency contact information and section 13 for waste disposal.

Small spill: Move containers from spill area. Vacuum or sweep up material and place in a designated, labelled waste container. Dispose of via a licensed waste disposal contractor.

Handling and storage

Handling: Put on appropriate personal protective equipment (see section 8). Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Avoid release to the environment. If during normal use the material presents a respiratory hazard, use only with adequate ventilation or wear appropriate respirator. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Keep away from acids. Empty containers retain product residue and can be hazardous.

Storage: Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and wellventilated area, away from incompatible materials (see section 10) and food and drink. Separate from acids. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers. Use appropriate containment to avoid environmental contamination.

Packaging materials Recommended : Use original container

Remarks: Take precautionary measures against electrostatic discharges

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not regulated
Shippingopen allclose all
Special provisions / remarks
Remarks:
Di(benzothiazol-2-yl) disulphide (MBTS) is classified in the Annex VI of Directive 67/548/EEC and the regulation (EC) No 1272/2008 as "very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment" with aquatic acute 1 (H400) and aquatic chronic 1 (H410). However, the ecotoxicological data do not support this classification. MBTS is a special case and in such a constellation MBTS products for transportation shall be classified based on the ecotoxicological data. This means that the former dangerous goods classification as UN3077 (Environmentally hazardous substance, solid, n.o.s.) has to be changed to "non dangerous goods"

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not regulated
Shippingopen allclose all
Special provisions / remarks
Remarks:
Di(benzothiazol-2-yl) disulphide (MBTS) is classified in the Annex VI of Directive 67/548/EEC and the regulation (EC) No 1272/2008 as "very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment" with aquatic acute 1 (H400) and aquatic chronic 1 (H410). However, the ecotoxicological data do not support this classification. MBTS is a special case and in such a constellation MBTS products for transportation shall be classified based on the ecotoxicological data. This means that the former dangerous goods classification as UN3077 (Environmentally hazardous substance, solid, n.o.s.) has to be changed to "non dangerous goods"

Marine transport (UN RTDG/IMDG)

UN number:
Not regulated
Shippingopen allclose all
Special provisions / remarks
Remarks:
Di(benzothiazol-2-yl) disulphide (MBTS) is classified in the Annex VI of Directive 67/548/EEC and the regulation (EC) No 1272/2008 as "very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment" with aquatic acute 1 (H400) and aquatic chronic 1 (H410). However, the ecotoxicological data do not support this classification. MBTS is a special case and in such a constellation MBTS products for transportation shall be classified based on the ecotoxicological data. This means that the former dangerous goods classification as UN3077 (Environmentally hazardous substance, solid, n.o.s.) has to be changed to "non dangerous goods"

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not regulated
Shippingopen allclose all
Special provisions / remarks
Remarks:
Di(benzothiazol-2-yl) disulphide (MBTS) is classified in the Annex VI of Directive 67/548/EEC and the regulation (EC) No 1272/2008 as "very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment" with aquatic acute 1 (H400) and aquatic chronic 1 (H410). However, the ecotoxicological data do not support this classification. MBTS is a special case and in such a constellation MBTS products for transportation shall be classified based on the ecotoxicological data. This means that the former dangerous goods classification as UN3077 (Environmentally hazardous substance, solid, n.o.s.) has to be changed to "non dangerous goods"
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Occupational Exposure Limit

Type of limit TLV (US) 10 mg/m3

Stability and reactivity

Stability: The product is stable.

Possibility of hazardous reactions: Hazardous reactions or instability may occur under certain conditions of storage or use. Conditions may include the following: contact with acids Reactions may include the following: liberation of toxic gas

Conditions to avoid: Take precautionary measures against static discharges. In the case of dusty organic products the possibility of a dust explosion should always be considered.

Materials to avoid: Reactive or incompatible with the following materials: acids

Hazardous decomposition products: Contact with acids liberates toxic gas.

Disposal considerations

Methods of disposal: Examine possibilities for re-utilisation. Product residues and uncleaned empty containers should be packaged, sealed, labelled, and disposed of or recycled according to relevant national and local regulations. Where large quantities are concerned, consult the supplier. When uncleaned empty containers are passed on, the recipient must be warned of any possible hazard that may be caused by residues. For disposal within the EC, the appropriate code according to the European Waste List (EWL) should be used. It is among the tasks of the polluter to assign the waste to waste

codes specific to industrial sectors and processes according to the European Waste List (EWL).

Hazardous waste: The classification of the product may meet the criteria for a hazardous waste.