INTRODUCTION TO FLUID MECHANICS


 Alan Spencer
 5 years ago
 Views:
Transcription
1 INTRODUCTION TO FLUID MECHANICS SIXTH EDITION ROBERT W. FOX Purdue University ALAN T. MCDONALD Purdue University PHILIP J. PRITCHARD Manhattan College JOHN WILEY & SONS, INC.
2 CONTENTS CHAPTER 1 INTRODUCTION /1 11 Note to Students /I 12 Definition of a Fluid /3 13 Scope of Fluid Mechanics I A 14 Basic Equations /4 15 Methods of Analysis /5 System and Control Volume /5 Differential versus Integral Approach /8 Methods of Description /8 16 Dimensions and Units /10 Systems of Dimensions /11 Systems of Units /11 Preferred Systems of Units / Summary /13 Problems /13 CHAPTER 2 FUNDAMENTAL CONCEPTS / Fluid as a Continuum / Velocity Field /19 One, Two, and Three Dimensional Flows /20 Timelines, Pathlines, Streaklines, and Streamlines / Stress Field / Viscosity /26 Newtonian Fluid /28 NonNewtonian Fluids / Surface Tension / Description and Classification of Fluid Motion /35 Viscous and Inviscid Flows /35 Laminar and Turbulent Flows /38 Compressible and Incompressible Flows /39 Internal and External Flows / Summary /42 References /42 Problems /42 CHAPTER 3 FLUID STATICS / The Basic Equation of Fluid Statics / The Standard Atmosphere / Pressure Variation in a Static Fluid /57 Incompressible Liquids: Manometers /57 Gases /63 vii
3 Viil CONTENTS 34 Hydraulic Systems / Hydrostatic Fouce on Submerged Surfaces /66 Hydrostatic Force on a Plane Submerged Surface /66 Hydrostatic Force on a Curved Submerged Surface /74 *3.6 Buoyancy and Stability / Fluids in RigidBody Motion (CDROM) /S Summary /82 References /82 Problems /83 CHAPTER 4 CHAPTER 5 BASIC EQUATIONS IN INTEGRAL FORM FOR A CONTROL VOLUME / Basic Laws for a System /99 Conservation of Mass /99 Newton's Second Law /100 The AngularMomentum Principle /100 The First Law of Thermodynamics /100 The Second Law of Thermodynamics / Relation of System Derivatives to the Control Volume Formulation / 101 Derivation /102 Physical Interpretation / Conservation of Mass /105 Special Cases / Momentum Equation for Inertial Control Volume /112 *Differential Control Volume Analysis /124 Control Volume Moving with Constant Velocity / Momentum Equation for Control Volume with Rectilinear Acceleration / Momentum Equation for Control Volume with Arbitrary Acceleration (CDROM) /S7 *47 The AngularMomentum Principle /139 Equation for Fixed Control Volume /139 Equation for Rotating Control Volume (CDROM) /S The First Law of Thermodynamics /144 Rate of Work Done by a Control Volume /144 Control Volume Equation / The Second Law of Thermodynamics / Summary /152 Problems /152 INTRODUCTION TO DIFFERENTIAL ANALYSIS OF FLUID MOTION / Conservation of Mass /184 Rectangular Coordinate System /184 Cylindrical Coordinate System /189 *52 Stream Function for TwoDimensional Incompressible Flow / Motion of a Fluid Particle (Kinematics) /197 Fluid Translation: Acceleration of a Fluid Particle in a Velocity Field /197 Fluid Rotation /203 Fluid Deformation /207
4 CONTENTS IX 54 Momentum Equation /211 Forces Acting on a Fluid Particle /212 Differential Momentum Equation 1213 Newtonian Fluid: NavierStokes Equations / Summary /222 References /223 Problems /223 CHAPTER 6 INCOMPRESSIBLE INVISCID FLOW / Momentum Equation for Frictionless Flow: Euler's Equation / Euler's Equations in Streamline Coordinates / Bernoulli EquationIntegration of Euler's Equation along a Streamline for Steady Flow /237 Derivation Using Streamline Coordinates /237 Derivation Using Rectangular Coordinates /238 Static, Stagnation, and Dynamic Pressures /239 Applications /243 Cautions on Use of the Bernoulli Equation / The Bernoulli Equation Interpreted as an Energy Equation / Energy Grade Line and Hydraulic Grade Line / Unsteady Bernoulli Equation  Integration of Euler's Equation along a Streamline (CDROM) IS Irrotational Flow (CDROM) /S20 Bernoulli Equation Applied to Irrotational Flow (CDROM) /S21 Velocity Potential (CDROM) /S22 Stream Function and Velocity Potential for TwoDimensional, Irrotational, Incompressible Flow: Laplace's Equation (CDROM) /S23 Elementary Plane Flows (CDROM) /S25 Superposition of Elementary Plane Flows (CDROM) /S Summary /256 References /257 Problems /257 CHAPTER 7 DIMENSIONAL ANALYSIS AND SIMILITUDE / Nondimensionalizing the Basic Differential Equations / Nature of Dimensional Analysis / Buckingham Pi Theorem / Determining the Pi Groups / Significant Dimensionless Groups in Fluid Mechanics / Flow Similarity and Model Studies /286 Incomplete Similarity /289 Scaling with Multiple Dependent Parameters /295 Comments on Model Testing /298 Summary /299 References /300 Problems /301 CHAPTER 8 INTERNAL INCOMPRESSIBLE VISCOUS FLOW / Introduction /310 PART A. FULLY DEVELOPED LAMINAR FLOW /312
5 X CONTENTS 82 Fully Developed Laminar Flow between Infinite Parallel Plates /312 Both Plates Stationary /312 Upper Plate Moving with Constant Speed, U / Fully Developed Laminar Flow in a Pipe /324 PART B. FLOW IN PIPES AND DUCTS / Shear Stress Distribution in Fully Developed Pipe Flow / Turbulent Velocity Profiles in Fully Developed Pipe Flow / Energy Considerations in Pipe Flow /334 Kinetic Energy coefficient /335 Head Loss / Calculation of Head Loss /336 Major Loss: Friction Factor /336 Minor Losses /341 Pumps, Fans, and Blowers in Fluid Systems /347 Noncircular Ducts / Solution of Pipe Flow Problems /349 SinglePath Systems /350 *MultiplePath Systems /364 PART C. FLOW MEASUREMENT / Direct Methods / Restriction Flow Meters for Internal Flows /370 The Orifice Plate /373 The Flow Nozzle /374 The Venturi /376 The Laminar Flow Element / LinearflowMeters / Traversing Methods / Summary /383 References /383 Problems /385 CHAPTER 9 EXTERNAL INCOMPRESSIBLE VISCOUS FLOW /409 PART A. BOUNDARY LAYERS / The BoundaryLayer Concept / BoundaryLayer Thicknesses / Laminar FlatPlate Boundary Layer: Exact Solution (CDROM) /S Momentum Integral Equation / Use of the Momentum Integral Equation for Flow with Zero Pressure Gradient /421 Laminar Flow /422 Turbulent Flow / Pressure Gradients in BoundaryLayer Flow /430 PARTB. FLUID FLOW ABOUT IMMERSED BODIES / Drag /433 Flow over a Flat Plate Parallel to the Flow: Friction Drag /434 Flow over a Flat Plate Normal to the Flow: Pressure Drag /437 Flow over a Sphere and Cylinder: Friction and Pressure Drag /438 Streamlining / Lift / Summary /464
6 CONTENTS XI References /465 Problems 4/466 CHAPTER 10 FLUID MACHINERY / Introduction and Classification of Fluid Machines /487 Machines for Doing Work on a Fluid /488 Machines for Extracting Work (Power) from a Fluid / Scope of Coverage / Turbomachinery Analysis /491 The AngularMomentum Principle /491 Euler Turbomachine Equation /491 Velocity Diagrams /493 Hydraulic Power / Performance Characteristics /502 Performance Parameters /503 Dimensional Analysis and Specific Speed /514 Similarity Rules /519 Cavitation and Net Positive Suction Head / Applications to Fluid Systems /528 Machines for Doing Work on a Fluid /529 Machines for Extracting Work (Power) from a Fluid / Summary /571 References /572 Problems /574 CHAPTER 11 INTRODUCTION TO COMPRESSIBLE FLOW / Review of Thermodynamics / Propagation of Sound Waves /596 Speed of Sound /596 Types of Flow  The Mach Cone / Reference State: Local Isentropic Stagnation Properties /602 Local Isentopic Stagnation Properties for the Flow of an Ideal Gas / Critical Conditions / Summary /611 References /611 Problems /611 CHAPTER 12 COMPRESSIBLE FLOW / Basic Equations for OneDimensional Compressible Flow / Isentropic Flow of an Ideal Gas  Area Variation /621 Subsonic Flow, M < 1 /623 Supersonic Flow, M > 1 /623 Sonic Flow, M = 1 /624 Reference Stagnation and Critical Conditions for Isentropic Flow of an Ideal Gas /625 Isentropic Flow in a Converging Nozzle /631 Isentropic Flow in a ConvergingDiverging Nozzle / Flow in a ConstantArea Duct with Friction /643 Basic Equations for Adiabatic Flow /644
7 XII CONTENTS Adiabatic Flow: The Fanno Line /645 FannoLine Flow Functions for OneDimensional Flow of an Ideal Gas /649 Isothermal Flow (CDROM) /S Frictionless Flow in a ConstantArea Duct with Heat Exchange /657 Basic Equations for Flow with Heat Exchange /658 The Rayleigh Line /659 RayleighLine Flow Functions for OneDimensional Flow of an Ideal Gas / Normal Shocks /669 Basic Equations for a Normal Shock /670 Normal Shock Flow Functions for OneDimensional Flow of an Ideal Gas / Supersonic Channel Flow with Shocks /678 Flow in a ConvergingDiverging Nozzle /678 Supersonic Diffuser (CDROM) /S46 Supersonic Wind Tunnel Operation (CDROM) /S48 Supersonic Flow with Friction in a ConstantArea Channel (CDROM) /S49 Supersonic Flow with Heat Addition in a ConstantArea Channel (CDROM) /S Oblique Shocks and Expansion Waves /680 Oblique Shocks /680 Isentropic Expansion Waves / Summary /699 References /699 Problems /700 APPENDIX A FLUID PROPERTY DATA /716 APPENDIX B EQUATIONS OF MOTION IN CYLINDRICAL COORDINATES /730 APPENDIX C VIDEOS FOR FLUID MECHANICS /731 APPENDIX D SELECTED PERFORMANCE CURVES FOR PUMPS AND FANS /733 APPENDIX E FLOW FUNCTIONS FOR COMPUTATION OF COMPRESSIBLE FLOW /744 APPENDIX F ANALYSIS OF EXPERIMENTAL UNCERTAINTY /755 APPENDIX G SI UNITS, PREFIXES, AND CONVERSION FACTORS /762 APPENDIX H A BRIEF REVIEW OF MICROSOFT EXCEL (CDROM) /S53 Answers to Selected Problems /765 Index /779
Textbook: Introduction to Fluid Mechanics by Philip J. Pritchard. John Wiley & Sons, 8th Edition, ISBN13 9780470547557, 10 0470547553
Semester: Spring 2016 Course: MEC 393, Advanced Fluid Mechanics Instructor: Professor Juldeh Sesay, 226 Heavy Engineering Bldg., (631)6328493 Email: Juldeh.sessay@stonybrook.edu Office hours: Mondays
More informationFundamentals of Fluid Mechanics
Sixth Edition. Fundamentals of Fluid Mechanics International Student Version BRUCE R. MUNSON DONALD F. YOUNG Department of Aerospace Engineering and Engineering Mechanics THEODORE H. OKIISHI Department
More informationDistinguished Professor George Washington University. Graw Hill
Mechanics of Fluids Fourth Edition Irving H. Shames Distinguished Professor George Washington University Graw Hill Boston Burr Ridge, IL Dubuque, IA Madison, Wl New York San Francisco St. Louis Bangkok
More informationApplied Fluid Mechanics
Applied Fluid Mechanics Sixth Edition Robert L. Mott University of Dayton PEARSON Prentkv Pearson Education International CHAPTER 1 THE NATURE OF FLUIDS AND THE STUDY OF FLUID MECHANICS 1.1 The Big Picture
More informationFLUID MECHANICS IM0235 DIFFERENTIAL EQUATIONS  CB0235 2014_1
COURSE CODE INTENSITY PREREQUISITE COREQUISITE CREDITS ACTUALIZATION DATE FLUID MECHANICS IM0235 3 LECTURE HOURS PER WEEK 48 HOURS CLASSROOM ON 16 WEEKS, 32 HOURS LABORATORY, 112 HOURS OF INDEPENDENT
More informationChapter 5 MASS, BERNOULLI AND ENERGY EQUATIONS
Fluid Mechanics: Fundamentals and Applications, 2nd Edition Yunus A. Cengel, John M. Cimbala McGrawHill, 2010 Chapter 5 MASS, BERNOULLI AND ENERGY EQUATIONS Lecture slides by Hasan Hacışevki Copyright
More informationDifferential Relations for Fluid Flow. Acceleration field of a fluid. The differential equation of mass conservation
Differential Relations for Fluid Flow In this approach, we apply our four basic conservation laws to an infinitesimally small control volume. The differential approach provides point by point details of
More informationCE 6303 MECHANICS OF FLUIDS L T P C QUESTION BANK PART  A
CE 6303 MECHANICS OF FLUIDS L T P C QUESTION BANK 3 0 0 3 UNIT I FLUID PROPERTIES AND FLUID STATICS PART  A 1. Define fluid and fluid mechanics. 2. Define real and ideal fluids. 3. Define mass density
More informationFluids and Solids: Fundamentals
Fluids and Solids: Fundamentals We normally recognize three states of matter: solid; liquid and gas. However, liquid and gas are both fluids: in contrast to solids they lack the ability to resist deformation.
More informationNUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES
Vol. XX 2012 No. 4 28 34 J. ŠIMIČEK O. HUBOVÁ NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES Jozef ŠIMIČEK email: jozef.simicek@stuba.sk Research field: Statics and Dynamics Fluids mechanics
More informationHigh Speed Aerodynamics Prof. K. P. Sinhamahapatra Department of Aerospace Engineering Indian Institute of Technology, Kharagpur
High Speed Aerodynamics Prof. K. P. Sinhamahapatra Department of Aerospace Engineering Indian Institute of Technology, Kharagpur Module No. # 01 Lecture No. # 06 Onedimensional Gas Dynamics (Contd.) We
More informationFundamentals of THERMALFLUID SCIENCES
Fundamentals of THERMALFLUID SCIENCES THIRD EDITION YUNUS A. CENGEL ROBERT H. TURNER Department of Mechanical JOHN M. CIMBALA Me Graw Hill Higher Education Boston Burr Ridge, IL Dubuque, IA Madison, Wl
More information4.What is the appropriate dimensionless parameter to use in comparing flow types? YOUR ANSWER: The Reynolds Number, Re.
CHAPTER 08 1. What is most likely to be the main driving force in pipe flow? A. Gravity B. A pressure gradient C. Vacuum 2.What is a general description of the flow rate in laminar flow? A. Small B. Large
More information220103  Fluid Mechanics
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2016 205  ESEIAAT  Terrassa School of Industrial, Aerospace and Audiovisual Engineering 729  MF  Department of Fluid Mechanics
More informationDimensional analysis is a method for reducing the number and complexity of experimental variables that affect a given physical phenomena.
Dimensional Analysis and Similarity Dimensional analysis is very useful for planning, presentation, and interpretation of experimental data. As discussed previously, most practical fluid mechanics problems
More informationLecture 5 Hemodynamics. Description of fluid flow. The equation of continuity
1 Lecture 5 Hemodynamics Description of fluid flow Hydrodynamics is the part of physics, which studies the motion of fluids. It is based on the laws of mechanics. Hemodynamics studies the motion of blood
More informationLecture 4 Classification of Flows. Applied Computational Fluid Dynamics
Lecture 4 Classification of Flows Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (00006) Fluent Inc. (00) 1 Classification: fluid flow vs. granular flow
More informationLecture 6  Boundary Conditions. Applied Computational Fluid Dynamics
Lecture 6  Boundary Conditions Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (20022006) Fluent Inc. (2002) 1 Outline Overview. Inlet and outlet boundaries.
More information1.Name the four types of motion that a fluid element can experience. YOUR ANSWER: Translation, linear deformation, rotation, angular deformation.
CHAPTER 06 1.Name the four types of motion that a fluid element can experience. YOUR ANSWER: Translation, linear deformation, rotation, angular deformation. 2.How is the acceleration of a particle described?
More informationCBE 6333, R. Levicky 1 Review of Fluid Mechanics Terminology
CBE 6333, R. Levicky 1 Review of Fluid Mechanics Terminology The Continuum Hypothesis: We will regard macroscopic behavior of fluids as if the fluids are perfectly continuous in structure. In reality,
More information1. Fluids Mechanics and Fluid Properties. 1.1 Objectives of this section. 1.2 Fluids
1. Fluids Mechanics and Fluid Properties What is fluid mechanics? As its name suggests it is the branch of applied mechanics concerned with the statics and dynamics of fluids  both liquids and gases.
More informationFree Convection Film Flows and Heat Transfer
Deyi Shang Free Convection Film Flows and Heat Transfer With 109 Figures and 69 Tables < J Springer Contents 1 Introduction 1 1.1 Scope 1 1.2 Application Backgrounds 1 1.3 Previous Developments 2 1.3.1
More informationLecture 11 Boundary Layers and Separation. Applied Computational Fluid Dynamics
Lecture 11 Boundary Layers and Separation Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (20022006) Fluent Inc. (2002) 1 Overview Drag. The boundarylayer
More informationdu u U 0 U dy y b 0 b
BASIC CONCEPTS/DEFINITIONS OF FLUID MECHANICS (by Marios M. Fyrillas) 1. Density (πυκνότητα) Symbol: 3 Units of measure: kg / m Equation: m ( m mass, V volume) V. Pressure (πίεση) Alternative definition:
More informationContents. Microfluidics  Jens Ducrée Physics: Fluid Dynamics 1
Contents 1. Introduction 2. Fluids 3. Physics of Microfluidic Systems 4. Microfabrication Technologies 5. Flow Control 6. Micropumps 7. Sensors 8. InkJet Technology 9. Liquid Handling 10.Microarrays 11.Microreactors
More informationChapter 10. Flow Rate. Flow Rate. Flow Measurements. The velocity of the flow is described at any
Chapter 10 Flow Measurements Material from Theory and Design for Mechanical Measurements; Figliola, Third Edition Flow Rate Flow rate can be expressed in terms of volume flow rate (volume/time) or mass
More informationCE 204 FLUID MECHANICS
CE 204 FLUID MECHANICS Onur AKAY Assistant Professor Okan University Department of Civil Engineering Akfırat Campus 34959 TuzlaIstanbul/TURKEY Phone: +902166771630 ext.1974 Fax: +902166771486 Email:
More informationUnit 1 INTRODUCTION 1.1.Introduction 1.2.Objectives
Structure 1.1.Introduction 1.2.Objectives 1.3.Properties of Fluids 1.4.Viscosity 1.5.Types of Fluids. 1.6.Thermodynamic Properties 1.7.Compressibility 1.8.Surface Tension and Capillarity 1.9.Capillarity
More informationBasic Principles in Microfluidics
Basic Principles in Microfluidics 1 Newton s Second Law for Fluidics Newton s 2 nd Law (F= ma) : Time rate of change of momentum of a system equal to net force acting on system!f = dp dt Sum of forces
More informationXI / PHYSICS FLUIDS IN MOTION 11/PA
Viscosity It is the property of a liquid due to which it flows in the form of layers and each layer opposes the motion of its adjacent layer. Cause of viscosity Consider two neighboring liquid layers A
More informationPractice Problems on Boundary Layers. Answer(s): D = 107 N D = 152 N. C. Wassgren, Purdue University Page 1 of 17 Last Updated: 2010 Nov 22
BL_01 A thin flat plate 55 by 110 cm is immersed in a 6 m/s stream of SAE 10 oil at 20 C. Compute the total skin friction drag if the stream is parallel to (a) the long side and (b) the short side. D =
More informationBasic Equations, Boundary Conditions and Dimensionless Parameters
Chapter 2 Basic Equations, Boundary Conditions and Dimensionless Parameters In the foregoing chapter, many basic concepts related to the present investigation and the associated literature survey were
More informationFluid Mechanics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur
Fluid Mechanics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture  20 Conservation Equations in Fluid Flow Part VIII Good morning. I welcome you all
More informationGraduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering
Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering Intended Audience: Main Campus Students Distance (online students) Both Purpose:
More informationCO 2 41.2 MPa (abs) 20 C
comp_02 A CO 2 cartridge is used to propel a small rocket cart. Compressed CO 2, stored at a pressure of 41.2 MPa (abs) and a temperature of 20 C, is expanded through a smoothly contoured converging nozzle
More informationNatural Convection. Buoyancy force
Natural Convection In natural convection, the fluid motion occurs by natural means such as buoyancy. Since the fluid velocity associated with natural convection is relatively low, the heat transfer coefficient
More informationOpen channel flow Basic principle
Open channel flow Basic principle INTRODUCTION Flow in rivers, irrigation canals, drainage ditches and aqueducts are some examples for open channel flow. These flows occur with a free surface and the pressure
More informationجامعة البلقاء التطبيقية
AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First
More informationThis chapter deals with three equations commonly used in fluid mechanics:
MASS, BERNOULLI, AND ENERGY EQUATIONS CHAPTER 5 This chapter deals with three equations commonly used in fluid mechanics: the mass, Bernoulli, and energy equations. The mass equation is an expression of
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationAbaqus/CFD Sample Problems. Abaqus 6.10
Abaqus/CFD Sample Problems Abaqus 6.10 Contents 1. Oscillatory Laminar Plane Poiseuille Flow 2. Flow in Shear Driven Cavities 3. Buoyancy Driven Flow in Cavities 4. Turbulent Flow in a Rectangular Channel
More informationFLUID FLOW Introduction General Description
FLUID FLOW Introduction Fluid flow is an important part of many processes, including transporting materials from one point to another, mixing of materials, and chemical reactions. In this experiment, you
More informationGraduate Courses in Mechanical Engineering
Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation
More informationThe Viscosity of Fluids
Experiment #11 The Viscosity of Fluids References: 1. Your first year physics textbook. 2. D. Tabor, Gases, Liquids and Solids: and Other States of Matter (Cambridge Press, 1991). 3. J.R. Van Wazer et
More informationDimensional Analysis
Dimensional Analysis An Important Example from Fluid Mechanics: Viscous Shear Forces V d t / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Ƭ = F/A = μ V/d More generally, the viscous
More informationUrban Hydraulics. 2.1 Basic Fluid Mechanics
Urban Hydraulics Learning objectives: After completing this section, the student should understand basic concepts of fluid flow and how to analyze conduit flows and free surface flows. They should be able
More informationExperiment (13): Flow channel
Introduction: An open channel is a duct in which the liquid flows with a free surface exposed to atmospheric pressure. Along the length of the duct, the pressure at the surface is therefore constant and
More informationA drop forms when liquid is forced out of a small tube. The shape of the drop is determined by a balance of pressure, gravity, and surface tension
A drop forms when liquid is forced out of a small tube. The shape of the drop is determined by a balance of pressure, gravity, and surface tension forces. 2 Objectives Have a working knowledge of the basic
More informationContents. Microfluidics  Jens Ducrée Physics: NavierStokes Equation 1
Contents 1. Introduction 2. Fluids 3. Physics of Microfluidic Systems 4. Microfabrication Technologies 5. Flow Control 6. Micropumps 7. Sensors 8. InkJet Technology 9. Liquid Handling 10.Microarrays 11.Microreactors
More informationFLUID MECHANICS FOR CIVIL ENGINEERS
FLUID MECHANICS FOR CIVIL ENGINEERS Bruce Hunt Department of Civil Engineering University Of Canterbury Christchurch, New Zealand? Bruce Hunt, 1995 Table of Contents Chapter 1 Introduction... 1.1 Fluid
More informationOUTCOME 3 TUTORIAL 5 DIMENSIONAL ANALYSIS
Unit 41: Fluid Mechanics Unit code: T/601/1445 QCF Level: 4 Credit value: 15 OUTCOME 3 TUTORIAL 5 DIMENSIONAL ANALYSIS 3 Be able to determine the behavioural characteristics and parameters of real fluid
More informationME 305 Fluid Mechanics I. Part 8 Viscous Flow in Pipes and Ducts
ME 305 Fluid Mechanics I Part 8 Viscous Flow in Pipes and Ducts These presentations are prepared by Dr. Cüneyt Sert Mechanical Engineering Department Middle East Technical University Ankara, Turkey csert@metu.edu.tr
More informationHeat Transfer From A Heated Vertical Plate
Heat Transfer From A Heated Vertical Plate Mechanical and Environmental Engineering Laboratory Department of Mechanical and Aerospace Engineering University of California at San Diego La Jolla, California
More informationChapter 17. For the most part, we have limited our consideration so COMPRESSIBLE FLOW. Objectives
Chapter 17 COMPRESSIBLE FLOW For the most part, we have limited our consideration so far to flows for which density variations and thus compressibility effects are negligible. In this chapter we lift this
More informationPractice Problems on the NavierStokes Equations
ns_0 A viscous, incompressible, Newtonian liquid flows in stead, laminar, planar flow down a vertical wall. The thickness,, of the liquid film remains constant. Since the liquid free surface is eposed
More informationChapter 2. Derivation of the Equations of Open Channel Flow. 2.1 General Considerations
Chapter 2. Derivation of the Equations of Open Channel Flow 2.1 General Considerations Of interest is water flowing in a channel with a free surface, which is usually referred to as open channel flow.
More informationAppendix 4C. Open Channel Theory
4C1 Appendix 4C Open Channel Theory 4C2 Appendix 4.C  Table of Contents 4.C.1 Open Channel Flow Theory 4C3 4.C.2 Concepts 4C3 4.C.2.1 Specific Energy 4C3 4.C.2.2 Velocity Distribution Coefficient
More informationFLUID DYNAMICS. Intrinsic properties of fluids. Fluids behavior under various conditions
FLUID DYNAMICS Intrinsic properties of fluids Fluids behavior under various conditions Methods by which we can manipulate and utilize the fluids to produce desired results TYPES OF FLUID FLOW Laminar or
More informationScalars, Vectors and Tensors
Scalars, Vectors and Tensors A scalar is a physical quantity that it represented by a dimensional number at a particular point in space and time. Examples are hydrostatic pressure and temperature. A vector
More informationNotes on Polymer Rheology Outline
1 Why is rheology important? Examples of its importance Summary of important variables Description of the flow equations Flow regimes  laminar vs. turbulent  Reynolds number  definition of viscosity
More informationChapter 13 OPENCHANNEL FLOW
Fluid Mechanics: Fundamentals and Applications, 2nd Edition Yunus A. Cengel, John M. Cimbala McGrawHill, 2010 Lecture slides by Mehmet Kanoglu Copyright The McGrawHill Companies, Inc. Permission required
More informationCFD Analysis of Supersonic Exhaust Diffuser System for Higher Altitude Simulation
Page1 CFD Analysis of Supersonic Exhaust Diffuser System for Higher Altitude Simulation ABSTRACT Alan Vincent E V P G Scholar, Nehru Institute of Engineering and Technology, Coimbatore Tamil Nadu A high
More informationSummary of Aerodynamics A Formulas
Summary of Aerodynamics A Formulas 1 Relations between height, pressure, density and temperature 1.1 Definitions g = Gravitational acceleration at a certain altitude (g 0 = 9.81m/s 2 ) (m/s 2 ) r = Earth
More informationO.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM. Darmstadt, 27.06.2012
O.F.Wind Wind Site Assessment Simulation in complex terrain based on OpenFOAM Darmstadt, 27.06.2012 Michael Ehlen IB Fischer CFD+engineering GmbH Lipowskystr. 12 81373 München Tel. 089/74118743 Fax 089/74118749
More informationEXAMPLE: Water Flow in a Pipe
EXAMPLE: Water Flow in a Pipe P 1 > P 2 Velocity profile is parabolic (we will learn why it is parabolic later, but since friction comes from walls the shape is intuitive) The pressure drops linearly along
More informationDynamic Process Modeling. Process Dynamics and Control
Dynamic Process Modeling Process Dynamics and Control 1 Description of process dynamics Classes of models What do we need for control? Modeling for control Mechanical Systems Modeling Electrical circuits
More informationLaminar Flow and Heat Transfer of HerschelBulkley Fluids in a Rectangular Duct; FiniteElement Analysis
Tamkang Journal of Science and Engineering, Vol. 12, No. 1, pp. 99 107 (2009) 99 Laminar Flow and Heat Transfer of HerschelBulkley Fluids in a Rectangular Duct; FiniteElement Analysis M. E. SayedAhmed
More informationHead Loss in Pipe Flow ME 123: Mechanical Engineering Laboratory II: Fluids
Head Loss in Pipe Flow ME 123: Mechanical Engineering Laboratory II: Fluids Dr. J. M. Meyers Dr. D. G. Fletcher Dr. Y. Dubief 1. Introduction Last lab you investigated flow loss in a pipe due to the roughness
More informationIsentropic flow. Wikepedia
Isentropic flow Wikepedia In thermodynamics, an isentropic process or isoentropic process (ισον = "equal" (Greek); εντροπία entropy = "disorder"(greek)) is one in which for purposes of engineering analysis
More informationThe Viscosity of Fluids
Experiment #11 The Viscosity of Fluids References: 1. Your first year physics textbook. 2. D. Tabor, Gases, Liquids and Solids: and Other States of Matter (Cambridge Press, 1991). 3. J.R. Van Wazer et
More informationPrerequisites 20122013
Prerequisites 20122013 Engineering Computation The student should be familiar with basic tools in Mathematics and Physics as learned at the High School level and in the first year of Engineering Schools.
More informationCh 2 Properties of Fluids  II. Ideal Fluids. Real Fluids. Viscosity (1) Viscosity (3) Viscosity (2)
Ch 2 Properties of Fluids  II Ideal Fluids 1 Prepared for CEE 3500 CEE Fluid Mechanics by Gilberto E. Urroz, August 2005 2 Ideal fluid: a fluid with no friction Also referred to as an inviscid (zero viscosity)
More informationWEEKLY SCHEDULE. GROUPS (mark X) SPECIAL ROOM FOR SESSION (Computer class room, audiovisual class room)
SESSION WEEK COURSE: THERMAL ENGINEERING DEGREE: Aerospace Engineering YEAR: 2nd TERM: 2nd The course has 29 sessions distributed in 14 weeks. The laboratory sessions are included in these sessions. The
More informationWhen the fluid velocity is zero, called the hydrostatic condition, the pressure variation is due only to the weight of the fluid.
Fluid Statics When the fluid velocity is zero, called the hydrostatic condition, the pressure variation is due only to the weight of the fluid. Consider a small wedge of fluid at rest of size Δx, Δz, Δs
More informationViscous flow in pipe
Viscous flow in pipe Henryk Kudela Contents 1 Laminar or turbulent flow 1 2 Balance of Momentum  NavierStokes Equation 2 3 Laminar flow in pipe 2 3.1 Friction factor for laminar flow...........................
More informationVISUAL PHYSICS School of Physics University of Sydney Australia. Why do cars need different oils in hot and cold countries?
VISUAL PHYSICS School of Physics University of Sydney Australia FLUID FLOW VISCOSITY POISEUILLE'S LAW? Why do cars need different oils in hot and cold countries? Why does the engine runs more freely as
More informationFLUID FLOW STREAMLINE LAMINAR FLOW TURBULENT FLOW REYNOLDS NUMBER
VISUAL PHYSICS School of Physics University of Sydney Australia FLUID FLOW STREAMLINE LAMINAR FLOW TURBULENT FLOW REYNOLDS NUMBER? What type of fluid flow is observed? The above pictures show how the effect
More information2.0 BASIC CONCEPTS OF OPEN CHANNEL FLOW MEASUREMENT
2.0 BASIC CONCEPTS OF OPEN CHANNEL FLOW MEASUREMENT Open channel flow is defined as flow in any channel where the liquid flows with a free surface. Open channel flow is not under pressure; gravity is the
More informationAir Flow Measurements
MEEM 30 ENERGY LABORATORY Air Flow Measurements Pitot Static Tube A slender tube aligned with the flow can measure local velocity by means of pressure differences. It has sidewall holes to measure the
More informationCompressible Fluids. Faith A. Morrison Associate Professor of Chemical Engineering Michigan Technological University November 4, 2004
94 c 2004 Faith A. Morrison, all rights reserved. Compressible Fluids Faith A. Morrison Associate Professor of Chemical Engineering Michigan Technological University November 4, 2004 Chemical engineering
More informationFor Water to Move a driving force is needed
RECALL FIRST CLASS: Q K Head Difference Area Distance between Heads Q 0.01 cm 0.19 m 6cm 0.75cm 1 liter 86400sec 1.17 liter ~ 1 liter sec 0.63 m 1000cm 3 day day day constant head 0.4 m 0.1 m FINE SAND
More informationChapter 8: Flow in Pipes
Objectives 1. Have a deeper understanding of laminar and turbulent flow in pipes and the analysis of fully developed flow 2. Calculate the major and minor losses associated with pipe flow in piping networks
More informationLift and Drag on an Airfoil ME 123: Mechanical Engineering Laboratory II: Fluids
Lift and Drag on an Airfoil ME 123: Mechanical Engineering Laboratory II: Fluids Dr. J. M. Meyers Dr. D. G. Fletcher Dr. Y. Dubief 1. Introduction In this lab the characteristics of airfoil lift, drag,
More informationFluid Dynamics Viscosity. Dave Foster Department of Chemical Engineering University of Rochester Email: dafoster@che
Fluid Dynamics Viscosity Dave Foster Department of Chemical Engineering University of Rochester Email: dafoster@che che.rochester.eduedu 1 Chemical Engineering What do Chemical Engineers Do? Manufacturing
More informationDISTANCE DEGREE PROGRAM CURRICULUM NOTE:
Bachelor of Science in Electrical Engineering DISTANCE DEGREE PROGRAM CURRICULUM NOTE: Some Courses May Not Be Offered At A Distance Every Semester. Chem 121C General Chemistry I 3 Credits Online Fall
More information2. Parallel pump system Q(pump) = 300 gpm, h p = 270 ft for each of the two pumps
Pumping Systems: Parallel and Series Configurations For some piping system designs, it may be desirable to consider a multiple pump system to meet the design requirements. Two typical options include parallel
More informationFluid Flow Instrumentation
Fluid Flow Instrumentation In the physical world, mechanical engineers are frequently required to monitor or control the flow of various fluids through pipes, ducts and assorted vessels. This fluid can
More informationAPPLIED MATHEMATICS ADVANCED LEVEL
APPLIED MATHEMATICS ADVANCED LEVEL INTRODUCTION This syllabus serves to examine candidates knowledge and skills in introductory mathematical and statistical methods, and their applications. For applications
More informationModeling Mechanical Systems
chp3 1 Modeling Mechanical Systems Dr. Nhut Ho ME584 chp3 2 Agenda Idealized Modeling Elements Modeling Method and Examples Lagrange s Equation Case study: Feasibility Study of a Mobile Robot Design Matlab
More informationChapter 4. Dimensionless expressions. 4.1 Dimensional analysis
Chapter 4 Dimensionless expressions Dimensionless numbers occur in several contexts. Without the need for dynamical equations, one can draw a list (real or tentative) of physically relevant parameters,
More informationSalem Community College Course Syllabus. Course Title: Physics I. Course Code: PHY 101. Lecture Hours: 2 Laboratory Hours: 4 Credits: 4
Salem Community College Course Syllabus Course Title: Physics I Course Code: PHY 101 Lecture Hours: 2 Laboratory Hours: 4 Credits: 4 Course Description: The basic principles of classical physics are explored
More informationBACHELOR OF SCIENCE DEGREE
BACHELOR OF SCIENCE DEGREE GENERAL EDUCATION CURRICULUM and Additional Degree Requirements Engineering Science Brett Coulter, Ph.D.  Director The Engineering Science degree is a wonderful way for liberal
More informationAdaptation of General Purpose CFD Code for Fusion MHD Applications*
Adaptation of General Purpose CFD Code for Fusion MHD Applications* Andrei Khodak Princeton Plasma Physics Laboratory P.O. Box 451 Princeton, NJ, 08540 USA akhodak@pppl.gov Abstract Analysis of many fusion
More informationRavi Kumar Singh*, K. B. Sahu**, Thakur Debasis Mishra***
Ravi Kumar Singh, K. B. Sahu, Thakur Debasis Mishra / International Journal of Engineering Research and Applications (IJERA) ISSN: 4896 www.ijera.com Vol. 3, Issue 3, MayJun 3, pp.76677 Analysis of
More informationPlatform Technology for Computational Fluid Dynamics Supporting Design of System Products
Hitachi Review Vol. 61 (2012), No. 6 244 Platform Technology for Computational Fluid Dynamics Supporting Design of System Products from Power Plants and Industrial Machinery to Home Appliances Shigehisa
More informationKeywords: CFD, heat turbomachinery, Compound Lean Nozzle, Controlled Flow Nozzle, efficiency.
CALCULATION OF FLOW CHARACTERISTICS IN HEAT TURBOMACHINERY TURBINE STAGE WITH DIFFERENT THREE DIMENSIONAL SHAPE OF THE STATOR BLADE WITH ANSYS CFX SOFTWARE A. Yangyozov *, R. Willinger ** * Department
More informationTWODIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW
TWODIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW Rajesh Khatri 1, 1 M.Tech Scholar, Department of Mechanical Engineering, S.A.T.I., vidisha
More informationImproved fluid control by proper nonnewtonian flow modeling
Tekna Flow Assurance 2015, Larvik Improved fluid control by proper nonnewtonian flow modeling Stein Tore Johansen, SINTEF Sjur Mo, SINTEF A general wall friction model for a nonnewtonian fluid has been
More informationTHE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA Adam Kosík Evektor s.r.o., Czech Republic KEYWORDS CFD simulation, mesh generation, OpenFOAM, ANSA ABSTRACT In this paper we describe
More information