Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.

 

 
0201-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A.; Delpharm Biotech Industrial use as a surfactant in a lysis buffer for the release of proteins and antigens from biological material used in the manufacture of three SERELISA veterinary In Vitro Diagnostic devices (IVDs) for detecting infectious disease in farm animals Opinion development
0201-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A.; Delpharm Biotech Industrial use in formulation of kits, kit reagents and buffer solutions in two WITNESS and three SERELISA veterinary In Vitro Diagnostic devices (IVDs) used for detecting certain diseases in pets and farm animals Opinion development
0201-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A. Industrial use as a viral inactivating agent in the manufacture of two veterinary biologic drugs for treatment of osteoarthritis in cats and dogs Opinion development
0201-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A. Professional use as a surfactant in kits, kit reagents and buffer solutions in 18 veterinary In Vitro Diagnostic devices (IVDs) including one SERELISA, six ProFLOK, six WITNESS and five VetScan. The use is carried out by professional users in diagnostic laboratories and veterinary clinics to detect certain diseases in pets and farm animals Opinion development
0100-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Functional chrome plating Commission decided
0100-02 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Surface treatment for applications in the aeronautics and aerospace industries (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Commission decided
0101-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ZF Luftfahrttechnik GmbH Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films Commission decided
0119-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Friedrichshafen AG Functional chrome plating of piston rods for automotive and rail applications Commission decided
0193-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Yposkesi Use of 4-tert-OPnEO for its non-ionic detergent properties for the cell membrane lysis and viral clearance during the development and manufacturing of viral vectors in medicinal products dedicated to human use (Investigational and Authorized Advanced Therapy Medicinal Product). Opinions adopted
0015-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Yara France Industrial use of diarsenic trioxide as a processing aid to activate the absorption and desorption of carbon dioxide by potassium carbonate from synthesis gas formed in the production of ammonia Authorisation expired
0188-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) for use in the assay buffer for the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity Opinions adopted
0163-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in enhancement solutions and DELFIA standard and maintenance solutions as a critical ingredient for detection process while measuring europium (or other lanthanide) content in In Vitro Diagnostic assays and RUO products or during maintenance of instruments Opinions adopted
0188-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) in the assay buffer of the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity Opinions adopted
0163-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) into enhancement solutions and DELFIA standard and maintenance solutions used in In Vitro Diagnostic assays and RUO products as well as maintenance of instruments as a critical ingredient for detection process while measuring europium (or other lanthanide) content of the assay solution Opinions adopted
0229-01 Review report Chromium trioxide 215-607-8 1333-82-0 Volta Energy Solutions Hungary Kft Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles Opinion development
0014-02 Initial Trichloroethylene 201-167-4 79-01-6 Vlisco Netherlands BV Use of trichloroethylene as a solvent in a process to recover and purify resin from process water Commission decided
0014-01 Initial Trichloroethylene 201-167-4 79-01-6 Vlisco Netherlands BV Use of trichloroethylene as a solvent for the removal and recovery of resin from dyed cloth Commission decided
0008-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce PVC articles Authorisation expired
0008-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Authorisation expired
0122-02 Review report Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 VINYLOOP
FERRARA
S.p.A.
Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrials workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. Withdrawn
0122-01 Review report Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 VINYLOOP
FERRARA
S.p.A.
Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Withdrawn
0216-01 Initial Chromium trioxide 215-607-8 1333-82-0 Viega Supply Chain GmbH & Co KG Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright silvery appearance for sanitary applications Opinion development
0216-02 Initial Chromium trioxide 215-607-8 1333-82-0 Viega Supply Chain GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinion development
0161-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Vetter Pharma-Fertigung GmbH & Co. KG Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for two specific medicinal products (NutropinAq® and Lucentis®) of one pharmaceutical company. Opinions adopted
0196-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Vetter Pharma-Fertigung GmbH & Co. KG Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers (syringes and cartridges) used as primary packaging material for 44 medicinal products of several pharmaceutical companies listed in the confidential Appendix 1 to the AoA. These products cover several therapeutic areas, and approx. 40 % of them are listed on the WHO Model List of Essential Medicines (EML). Opinions adopted
0073-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Veco B.V. Use of ammonium dichromate as photosensitive component in a polyvinyl alcohol photolithographic lacquer system for the manufacturing of mandrels which are used in nickel electroforming processes. Commission decided
0221-01 Initial Chromium trioxide 215-607-8 1333-82-0 U. S. Steel Košice, s.r.o. Use of Chromium (VI) Trioxide for Passivation of Electrolytic Tinplate (ETP). Opinion development
0221-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
U. S. Steel Košice, s.r.o. Use of Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP). Opinion development
0074-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
TOTAL RAFFINERIE
MITTELDEUTSCHLAND
GMBH
Use of sodium dichromate as a corrosion inhibitor in an ammonia absorption deep cooling system of a methanol synthesis plant. Commission decided
0069-01 Initial Chromium trioxide 215-607-8 1333-82-0 Topocrom GmbH TOPOCROM functional chrome plating in closed reactor systems for the establishment of adjustable hemispherical surface structures. Commission decided
0134-02 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Electrolytic Chromium Coating of Steel (ECCS) Commission decided
0134-01 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Passivation of tinplated steel (ETP) Commission decided
0135-01 Initial Chromium trioxide 215-607-8 1333-82-0 Thyssenkrupp Electrical Steel GmbH;
Thyssenkrupp Electrical
Steel UGO S.A.S.
Surface treatment for the manufacture of grain-oriented electrical steel used in magnetic circuits of electric devices, in particular magnetic cores of high-performance transformers Opinions adopted
0190-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Teva Baltics UAB The use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated (TritonX-100) as a nonionic surfactant for bacteria cells disruption and washing of inclusion bodies in Biological Drug Substance manufacturing process Opinions adopted
0146-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel UK Ltd - [Application void as of 01/01/2021] The use of Chromium (VI) Trioxide for the manufacture of Electrolytic Chromium/Chromium oxide Coated Steel (ECCS) Application void as of 01 January 2021
0211-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel IJmuiden BV; Tata Steel UK Ltd - [Application void as of 01/01/2021] Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0211-02 Initial Sodium dichromate 234-190-3 10588-01-9 Tata Steel IJmuiden BV; Tata Steel UK Ltd - [Application void as of 01/01/2021] Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Opinions adopted
0158-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Swords Laboratories Industrial use of the substance as a surfactant in the purification of the biopharmaceutical drug Orencia, used for the treatment of Rheumatoid Arthritis, Juvenile Idiopathic Arthritis and Adult Psoriatic Arthritis Opinions adopted
0164-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Swedish Orphan Biovitrum The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in manufacture of biopharmaceuticals by Swedish Orphan Biovitrum AB. Opinions adopted
0213-01 Initial Chromium trioxide 215-607-8 1333-82-0 Steel Color S.p.A. Use of chromium trioxide as colouring and hardening agent for stainless steel plates Opinion development
0220-02 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Functional chrome plating with decorative character for transportation applications. Opinion development
0220-01 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Chromium trioxide-based etching as pre-treatment step for electroplating of plastics for transportation applications. Opinion development
0129-01 Review report Trichloroethylene 201-167-4 79-01-6 SPOLANA s.r.o. [name of applicant in the original application: SPOLANA a.s. updated due to a notified change of corporate name] Use as an extraction solvent in caprolactam production Commission decided
0022-01 Initial Trichloroethylene 201-167-4 79-01-6 SPOLANA a.s. Use as an extraction solvent in caprolactam production Commission decided
0072-01 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
ITT Cannon GmbH
Connecteurs Electriques Deutsch
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided
0072-07 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided
0072-02 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
ITT Cannon GmbH
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided
0072-06 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Souriau sas;
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided
0072-03 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas Industrial use of a mixture containing chromium trioxide for the etching of composite connectors used by industries subject to harsh environments, to mainly ensure adhesive deposit to meet the requirements of international standards. Commission decided
0039-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
SOLVAY PORTUGAL - PRODUTOS QUIMICOS S.A. Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0048-02 Initial Potassium dichromate 231-906-6 7778-50-9 SOFRADIR Industrial use of potassium dichromate based mixture during the etching of both InSb substrate sides during the production of optoelectronic components gathering a readout and an infrared detecting circuit with the InSb technology Commission decided
0048-01 Initial Potassium dichromate 231-906-6 7778-50-9 SOFRADIR Industrial use of potassium dichromate-based mixtures during the steps of initial and final etching of CZT layers during the production of opto-electronic components gathering a readout and an infrared detecting circuit with the MCT technology Commission decided
0137-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
SOCIETA' CHIMICA BUSSI S.P.A. Use of sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacturing of sodium chlorite. Commission decided
0154-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd - [Application void as of 01/01/2021] Use of OPE in isolation of protein from recombinant cell cultures for the production of IVD-kits (protein cell extraction) Application void as of 01 January 2021
0154-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd - [Application void as of 01/01/2021] Use of OPE in formulation of IVD-kit reagents Application void as of 01 January 2021
0154-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd - [Application void as of 01/01/2021] Use of OPE in formulation of IVD- wash solutions Application void as of 01 January 2021
0154-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd - [Application void as of 01/01/2021] Use of IVD-kit reagents on diagnostic analyser systems Application void as of 01 January 2021
0154-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd - [Application void as of 01/01/2021] Use of IVD-wash solutions on diagnostic analyser systems Application void as of 01 January 2021
0173-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Siemens Healthcare Diagnostics Products Ltd Use of OPE as detergent in the production of bead components for in-vitro diagnostic kits for an immunoassay platform Opinions adopted
0191-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Sekisui S-lec BV Roermond Industrial use as polymer additive in the manufacture of interlayer polymer films for laminated safety glass Opinions adopted
0141-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its detergent properties in the production of electrophoresis gels in view of ensuring the positioning of specific proteins necessary for the interpretation of results of gel electrophoresis in vitro diagnostic tests. Opinions adopted
0141-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its wetting detergent properties in the production of buffers, reagents and gel supports allowing the dissolution, the dilution and the good spreading of substrates and reagents, necessary to optimize the functioning and the sensitivity of gel electrophoresis in vitro diagnostic tests. Opinions adopted
0141-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its detergent properties resulting in cellular lysis and protein interactions rupture and required for the production of reagents involved in the determination of proteins of interest in gel and capillary electrophoresis IVD tests. Opinions adopted
0142-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - SEBIA Industrial use of 4-NPnEO for its detergent properties in the production of buffers and reagents in view of ensuring the positioning of specific proteins necessary for the interpretation of gel electrophoresis in vitro diagnostic tests results based on the determination of isoenzymes. Opinions adopted
0131-01 Initial Chromium trioxide 215-607-8 1333-82-0 Schell GmbH & Co. KG Armaturentechnologie Functional chrome plating with decorative character for sanitary applications Opinions adopted
0006-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Sasol-Huntsman GmbH & Co. KG Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0199-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Sanquin Reagents B.V. Use of Triton™ X-100 (4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated) in formulation of components for IVD kits. Opinions adopted
0156-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Sanofi Pasteur Use of Octoxynol-9 for virus splitting and inactivation step in the manufacturing of influenza vaccines Opinions adopted
0214-02 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Pretex® functional chrome plating using chromium trioxide in closed reactor systems for the establishment of adjustable hemispherical surface structures on working rolls applied in the steel industry for the manufacture of cold-rolled, high quality textured sheet metal Opinion development
0214-01 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal Opinion development
0230-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Safran Landing Systems; SOCIETE DE TRAITEMENTS ELECTROLYTIQUES NORMALISES S.T.E.N. Industrial use of 4-NPnEO as non-reactive surfactant in the sealing product in sulfuric acid anodization process of aluminium alloy parts of aircraft landing gears Opinion development
0065-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines [name of applicant in the original application: SNECMA updated due to a notified change of corporate name] Industrial use of a chromium trioxide based surface treatment mixture applied on safety-critical rotating components of commercial and military aircraft engines, whose failure endangers airworthiness Commission decided
0209-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines Industrial use of chromium trioxide-based mixtures for the surface treatment of legacy spare parts of military aircraft engines, including safety-critical parts whose failure endangers airworthiness Opinion development
0115-03 Initial Potassium chromate 232-140-5 7789-00-6 Saes Getters S.p.A. Use of alkali metal dispensers containing potassium chromate for production of photocathodes. Commission decided
0115-01 Initial Potassium chromate 232-140-5 7789-00-6 Saes Getters S.p.A. Use of potassium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided
0115-02 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of sodium chromate in the fabrication of alkali metal dispensers for production of photocathodes. Commission decided
0115-04 Initial Sodium chromate 231-889-5 7775-11-3 Saes Getters S.p.A. Use of alkali metal dispensers containing sodium chromate for production of photocathodes. Commission decided
0195-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - RSI ChemRep Europe Ltd (O002) OR for OraSure Technologies Inc Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as surfactant in in –vitro diagnostic device developer solution. Opinion development
0007-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Roxel (UK Rocket Motors) Ltd Industrial use of DEHP in manufacture of solid propellants and motor charges for rockets and tactical missiles Authorisation expired
0007-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Roxel (UK Rocket Motors) Ltd Industrial use of DBP in manufacture of solid propellants and motor charges for rockets and tactical missiles Authorisation expired
0007-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 Roxel (UK Rocket Motors) Ltd Industrial use of DBP within a specialty paint in manufacture of motors for rockets and tactical missiles Authorisation expired
0166-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Rousselot bvba Use of 4-(1,1,3,3-tetramethylbutyl)phenol ethoxylated as a surfactant in the manufacturing of low endotoxin gelatin Opinions adopted
0227-01 Review report Trichloroethylene 201-167-4 79-01-6 ROQUETTE Frères Use as a processing aid in the biotransformation of starch to obtain betacyclodextrin Opinion development
0018-01 Initial Trichloroethylene 201-167-4 79-01-6 ROQUETTE Frères Use of trichloroethylene as a processing aid in the biotransformation of starch to obtain betacyclodextrin Commission decided
0001-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Rolls-Royce plc – [Decision discontinued as of 01/01/2021] The processing of a stop-off formulation containing DEHP during the diffusion bonding and manufacture of aero engine fan blades. Discontinued as of 01 January 2021
0171-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) Opinions adopted
0171-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0160-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Roche Diagnostics GmbH Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for medicinal products (NeoRecormon® and MIRCERA®). Opinions adopted
0171-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0171-06 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) Opinions adopted
0171-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Opinions adopted
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided
0053-01 Initial Chromic acid
231-801-5
236-881-5
13530-68-2
7738-94-5
Robert Bosch GmbH Hard chrome plating for gasoline and diesel injection applications Commission decided
0056-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rimex Metals (UK) Ltd – [Decision discontinued as of 01/01/2021] Use of chromium trioxide as an oxidising and hardening agent in the manufacture of coloured stainless steel Discontinued as of 01 January 2021
0026-01 Initial Trichloroethylene 201-167-4 79-01-6 Richard Geiss GmbH Use of tricholoroethylene in formulation Commission decided
0026-02 Initial Trichloroethylene 201-167-4 79-01-6 Richard Geiss GmbH Use of tricholoroethylene in packaging Commission decided
0177-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Rentschler Biopharma SE Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated in a washing buffer applied during a purification step in the manufacture of the monoclonal antibody Dinutuximab beta Opinions adopted
0095-04 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Commission decided
0095-03 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Functional chrome plating with decorative character Opinions adopted
0095-02 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Functional Chrome Plating Commission decided
0095-01 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Formulation of mixtures of chromium trioxide for functional chrome plating, functional chrome plating with decorative character and surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Commission decided
0094-01 Initial 2,2'-dichloro-4,4'-methylenedianiline (MOCA) 202-918-9 101-14-4 REACHLaw Ltd in its legal capacity as Only Representative of Suzhou Xiangyuan Special Fine Chemical Co., Ltd Industrial use of MOCA as a curing agent/chain extender in cast polyurethane elastomer production Opinions adopted
0121-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Ramboll Belgium BVBA [application transferred from: “Indestructible Paint Ltd.” due to a notified legal entity change] Use of pentazinc chromate octahydroxide in stoved epoxy primer for corrosion protection of aircraft engine components in aerospace and aeroderivative applications Commission decided
0151-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0151-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0152-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon bvba Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0152-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Rain Carbon bvba Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0027-01 Initial Trichloroethylene 201-167-4 79-01-6 RAG Aktiengesellschaft, RAG Anthrazit Ibbenbüren GmbH Use of Tricholoroethylene-containing vulcanising and bonding agents for endless connections and repair of chloroprene rubber coated conveyor belts in underground hard coal mining Authorisation expired
0200-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; STAT-Dx Life S.L.; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) Opinion development
0200-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; STAT-Dx Life S.L. Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0200-07 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing Opinion development
0200-08 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing Opinion development
0200-06 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd.; QIAGEN Manchester Ltd.; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) Opinion development
0200-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0200-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0200-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Opinion development
0054-02 Initial Chromium trioxide 215-607-8 1333-82-0 Praxair Surface Technologies GmbH Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. Commission decided
0054-01 Initial Chromium trioxide 215-607-8 1333-82-0 Praxair Surface Technologies GmbH Industrial spraying or brush application of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment, to ensure a high temperature corrosion & oxidation resistance, as well as anti-fouling properties or lubricity at high temperature, for automotive, aviation, power generation machinery, Oil and Gas and marine applications. Commission decided
0047-02 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Industries (UK) Ltd
Finalin GmbH
PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Use of potassium hydroxyoctaoxodizincatedichromate in paints, in primer, sealants, and coatings (including as wash primers) Commission decided
0047-01 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Industries (UK) Ltd
Finalin GmbH
PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Formulation of Mixtures Commission decided
0203-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc. – [Decision discontinued as of 01/01/2021]; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] The formulation of a hardener component containing OPE in Aerospace and Defence (A&D) two-part polysulphide sealants. Opinions adopted
0203-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. – OR5; Sealants Europe SAS; PPG Industries (UK) Ltd.; Boeing Distribution, Inc. – [Decision discontinued as of 01/01/2021]; Aviall UK Inc.; Wesco Aircraft EMEA Ltd (Poland); HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] Mixing, by Aerospace and Defence Companies, and their associated supply chains, including the Applicants, of base polysulfide sealant components with OPE-containing hardener, resulting in mixtures containing < 0.1% w/w of OPE for Aerospace and Defence uses that are exempt from authorisation under REACH Art. 56(6)(a). Opinions adopted
0090-01 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Formulation of an epoxy resin hardener containing technical MDA Commission decided
0090-02 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Industrial use of an epoxy resin hardener containing technical MDA aimed at immobilising spent ion exchange resins in a high containment matrix Commission decided
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided
0123-02 Review report Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Plastic Planet srl Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrial workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. Opinions adopted
0123-01 Review report Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Plastic Planet srl Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Opinions adopted
0206-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Phadia GmbH; Thermo Fisher Scientific Baltics UAB Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB Opinion development
0206-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Phadia GmbH; Thermo Fisher Scientific Baltics UAB Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB Opinion development
0206-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Phadia GmbH; B∙R∙A∙H∙M∙S GmbH Coating Thyroid Stimulating Hormone Receptor onto articles used as components of IVD reagent systems at B∙R∙A∙H∙M∙S GmbH and Phadia GmbH Opinion development
0192-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Manufacturing Belgium NV The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant within a lubricant used in the manufacture of pharmaceutical drug products. Opinions adopted
0198-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Ireland Pharmaceuticals The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals - Viral Inactivation and associated processes. Opinion development
0198-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Pfizer Ireland Pharmaceuticals The use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (4-tert-OPnEO))(Triton X-100) as a surfactant in the manufacture of biopharmaceuticals – Post-Production Cleaning. Opinion development
0019-01 Initial Trichloroethylene 201-167-4 79-01-6 Parker Hannifin Manufacturing Netherlands (Filtration & Separation) BV Use of trichloroethylene (TCE) as a process solvent for the manufacturing of modules containing hollow fibre gas separation membranes Commission decided
0033-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oy Kromatek Ab; Kova-Kromi Oy; CrTe-Plating Oy; Saizeri Plating Oy; Turun Kovakromi Oy; Veljekset Wallenius Oy; Pirkan Kovakromaus Oy Use of chromium trioxide in Cr(VI) based functional plating Commission decided
0139-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Ortho-Clinical Diagnostics France [application transferred from: “Ortho-Clinical Diagnostics” due to a notified legal entity change]. Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in two in vitro diagnostic VITROS® products used by professional diagnostic laboratories to detect antibodies to human hepatitis A virus and IgG antibodies to rubella virus. Opinions adopted
0139-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Ortho-Clinical Diagnostics - [Application void as of 01/01/2021] Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) for use in the manufacture of in vitro diagnostic VITROS® products used for infectious disease screening, endocrinology, and oncology testing. Application void as of 01 January 2021
0108-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as a process solvent in the manufacture of an Active Pharmaceutical Ingredient: Flecainide acetate Commission decided
0108-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as an process solvent in the manufacture of an Active Pharmaceutical Ingredient: Nefopam hydrochloride Commission decided
0215-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy
Oras Olesno Sp.z.o.o.
Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications Opinion development
0215-02 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy Pre-treatment (“etching”) of plastic substrates using chromium trioxide for electroplating processes in sanitary applications Opinion development
0111-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient prednisolone steaglate. Commission decided
0111-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient for epirubicin. Commission decided
0170-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Octapharma AB
Octapharma Pharmazeutika Produktionsgesellschaft m.b.H
Octapharma S.A.S.
Octapharma Produktionsgesellschaft Deutschland mbH
Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as detergent for a virus inactivation step (solvent/detergent treatment) during the manufacture of plasma-derived and recombinant medicinal products Opinions adopted
0170-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Octapharma AB Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as component of a chromatography column regeneration solution during the manufacture of a recombinant-derived Factor VIII Opinions adopted
0159-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Nuova Ompi S.r.l. unipersonale Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for one specific medicinal product (NeoRecormon®) of one pharmaceutical company. Opinions adopted
0162-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Novo Nordisk A/S Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as a solvent/detergent agent for virus inactivation in the manufacture of pharmaceutical products used in the treatment of rare bleeding disorders. Opinions adopted
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided
0010-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Nordenhamer Zinkhütte GmbH Industrial use of diarsenic trioxide to produce a copper concentrate in the purification of the leaching solution in a zinc electrowinning process Commission decided
0057-05 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Nexter Systems Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided
0057-04 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics
Nexter Systems
Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided
0057-02 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. Commission decided
0057-03 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the black colour hard chromium plating of exterior surface of steel weapon barrel designed for military use, to ensure, during the whole gun barrel service life, stealth, erosion, corrosion and high temperature resistances in the condition of uses. Commission decided
0057-01 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. Commission decided
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided
0066-01 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Functional chrome plating for aerospace applications for civil and military uses, comprising coating of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components Commission decided
0066-02 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating Commission decided
0016-01 Initial Trichloroethylene 201-167-4 79-01-6 Microporous GmbH Trichloroethylene used as degreasing solvent in the manufacture of polyethylene separators for lead-acid batteries Commission decided
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided
0120-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 Microbeads AS Industrial use as a swelling agent during the sulfonation reaction of crosslinked polystyrene beads in the manufacture of ion exchange resins for purification of radioactive waste Commission decided
0202-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merckle-GmbH-Ulm The use of 4-OPnEO as an emulsifier in a silicone oil emulsion for siliconization of pre-filled syringes in a medicinal product Opinions adopted
0197-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a surface-active ingredient for the production of two types of mixed cellulose ester membranes (lateral flow and microfiltration membranes). Opinions adopted
0197-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Downstream use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as component of mixed cellulose ester membranes. Opinions adopted
0175-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merck KGaA Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (technical grade) as raw material for the manufacturing of GMP Triton® X-100 Emprove® Expert according to IPEC standards Opinions adopted
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided
0157-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merck Biodevelopment SAS
Fujifilm Diosynth Biotechnologies (UK) Ltd - [Application void as of 01/01/2021]
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a detergent in the purification process of G-CSF (Granulocyte Colony Stimulating Factor) inclusion bodies Opinions adopted
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Commission decided
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided
0189-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lonza Biologics Porriño, SL.
Lonza Biologics, plc. - [Application void as of 01/01/2021]
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated for virus inactivation via solvent/detergent treatment in the manufacture of recombinant medicinal active pharmaceutical ingredients (APIs) from mammalian cell cultures Opinions adopted
0011-02 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Industrial use of diarsenic trioxide as processing aid in gold electroplating Commission decided
0011-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Formulation of diarsenic trioxide into a mixture Commission decided
0225-01 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for custom-made rollers with high reliability requirements for steel and aluminium sectors. Opinion development
0225-02 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for heavy-duty rollers, tensioner pads and spring blocks with high reliability requirements for offshore energy and renewables sectors. Opinion development
0184-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lilly France S.A.S.; Eli Lilly Italia S.p.A. Industrial formulation (dilution) of a silicone solution containing 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated and its subsequent use as a lubricant in the manufacture of medicinal product delivery devices Opinions adopted
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided
0176-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LFB BIOMEDICAMENTS Use as virus inactivation into the manufacture process of plasma-derived immunoglobulins. Opinions adopted
0226-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - LETI Pharma, S.L.U. [name of applicant in the original application: Laboratorios LETI, S.L.U. updated due to a notified change of corporate name] Use of 4-tert-OPnEO in aqueous buffers during the manufacturing process of the active pharmaceutical ingredient (Protein Q) of the veterinary vaccine LetiFend® Opinion development
0212-01 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the etching, pre-treatment step in the electroplating process of functional chrome plating with decorative character Opinion development
0212-02 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the functional chrome plating with decorative character for automotive and sanitary industry Opinion development
0079-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins Commission decided
0079-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins Commission decided
0223-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins. Opinion development
0029-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Laboratoires Expanscience Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients Commission decided
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0150-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Koppers Denmark ApS Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0132-02 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinions adopted
0132-01 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Opinions adopted
0038-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Kemira Chemicals Oy Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0155-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Kedrion S.p.A Use of 4-tert-OPnEO as Triton X-100 as detergent for virus inactivation in the manufacturing process of the human plasma-derived medicinal products Plasmagrade/Plasmasafe and Resusix, as well as Plasminogen (pre-commercialization name) and any subsequent commercialization brand Opinions adopted
0169-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Janssen Vaccines & Prevention BV
Janssen Biologics B.V.
4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step. Opinions adopted
0075-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Jacobs Douwe Egberts
DE GmbH
Dr. Otto Suwelack Nachf.
GmbH & Co. KG
Européenne de Lyophilisation S.A.
Use of sodium dichromate as a corrosion inhibitor in ammonia absorption deep cooling systems as applied in the industrial production of freeze dried products such as coffee, herbs, spices and comparable products. Commission decided
0194-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Instrumentation Laboratory SpA Use as a lysing agent for red blood cells in blood analysis diagnostic device. Opinions adopted
0013-02 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Manufacture of flame retarded expanded polystyrene (EPS) articles for use in building applications Authorisation expired
0013-01 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) Authorisation expired
0149-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Industrial Quimica del Nalon, S.A. Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0121-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Indestructible Paint Ltd. Formulation of mixtures Commission decided
0105-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Use of Sodium Dichromate as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0105-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Repackaging of Sodium Dichromate to be supplied as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0185-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as detergent in the technical manufacturing of in vitro diagnostic veterinary ELISA Plate tests (plate coating) to prevent the non-specific binding of unwanted macromolecules Opinions adopted



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live2