Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

 

This page provides further information on the applications for authorisation or review reports, which have undergone public consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. The European Commission's decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

 
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided
0053-01 Initial Chromic acid
231-801-5
236-881-5
13530-68-2
7738-94-5
Robert Bosch GmbH Hard chrome plating for gasoline and diesel injection applications Commission decided
0032-05 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment (except passivation of tin-plated steel (ETP)) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Opinions adopted
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted
0100-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Functional chrome plating Commission decided
0130-01 Initial Chromium trioxide 215-607-8 1333-82-0 Aloys F. Dornbracht GmbH & Co.KG Functional chrome plating with decorative character for sanitary applications Opinions adopted
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinions adopted
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided
0034-02 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium Trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0054-02 Initial Chromium trioxide 215-607-8 1333-82-0 Praxair Surface Technologies GmbH Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. Commission decided
0057-01 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. Commission decided
0057-02 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. Commission decided
0070-01 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
MANROY ENGINEERING LTD
Industrial use of chromium trioxide in the hard chromium coating of military small- and medium-caliber firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide hardness, heat resistance and thermal barrier properties, as well as corrosion resistance, adhesion and low friction properties Commission decided
0072-02 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
Amphenol Limited
AMPHENOL SOCAPEX
ITT Cannon GmbH
TE UK Ltd
Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided
0095-03 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Functional chrome plating with decorative character Opinions adopted
0095-04 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Opinions adopted
0032-01 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Formulation of mixtures Opinions adopted
0032-02 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional Chrome Plating Opinions adopted
0032-06 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Passivation of tin-plated steel (ETP) Opinions adopted
0034-01 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional electroplating with decorative character) Commission decided
0050-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Friedberg GmbH Functional chrome plating of piston rings for two-stroke and four-stroke large bore engines as applied in the industrial sectors Construction & Industry, Power Generation, Railway and Maritime. Commission decided
0066-02 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating Commission decided
0071-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gerhardi Kunststofftechnik GmbH

C. Hübner GmbH

SAXONIA Galvanik GmbH

Simon Systems GmbH & Co. KG [name of co-applicant in the original application: Karl Simon GmbH & Co. KG updated due to a notified legal entity name change]

Galvanoplast Fischer Bohemia, s.r.o. [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

Fischer Oberflächentechnologie GmbH [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

WAFA Germany GmbH

Boryszew Oberflächentechnik Deutschland GmbH

Bolta Werke GmbH

Heinze Gruppe GmbH

C+C Krug GmbH

BIA Kunststoff- und Galvanotechnik GmbH & Co KG

Aludec Galvanic s.a.
Plating on Plastics for Automotive Applications (PoPAA) Opinions adopted
0092-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of plastic, with or without current flow Opinions adopted
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Opinions adopted
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Opinions adopted
0133-01 Iitital Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD;
Ideal Standard Produktions-GmbH;
Jado Iberia-Produtos Metalurgicos Sociedade Unipessoal LDA (withdrawn)
Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Opinions adopted
0114–02 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0032-04 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment for applications in the aeronautics and aerospace industries, unrelated to Functional chrome plating or Functional chrome plating with decorative character Opinions adopted
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided
0055-01 Initial Chromium trioxide 215-607-8 1333-82-0 CROMOMED S.A.
CRONOR S.A.
Cromo Europa S.A.
CHROMATLANTIQUE INDUSTRIEL
VILA ELECTROQUIMICAS.A.
Functional Chrome Plating Opinions adopted
0056-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rimex Metals (UK) Ltd Use of chromium trioxide as an oxidising and hardening agent in the manufacture of coloured stainless steel Commission decided
0064-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in dissolved and solid form to produce aqueous solutions of any composition for industrial application. Opinions adopted
0067-01 Initial Chromium trioxide 215-607-8 1333-82-0 Abloy Oy Use of chromium trioxide in electroplating of mechanical and electromechanical cylinders, cam- and padlocks, electromechanical lock cases and architectural hardware. Commission decided
0069-01 Initial Chromium trioxide 215-607-8 1333-82-0 Topocrom GmbH TOPOCROM functional chrome plating in closed reactor systems for the establishment of adjustable hemispherical surface structures. Commission decided
0072-03 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas Industrial use of a mixture containing chromium trioxide for the etching of composite connectors used by industries subject to harsh environments, to mainly ensure adhesive deposit to meet the requirements of international standards. Commission decided
0095-01 Initial Chromium trioxide 215-607-8 1333-82-0 REACHLaw Ltd as Only Representative on behalf of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” Formulation of mixtures of chromium trioxide for functional chrome plating, functional chrome plating with decorative character and surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Opinions adopted
0100-02 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Luftfahrttechnik GmbH Surface treatment for applications in the aeronautics and aerospace industries (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Commission decided
0119-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Friedrichshafen AG Functional chrome plating of piston rods for automotive and rail applications Commission decided
0135-01 Initial Chromium trioxide 215-607-8 1333-82-0 Thyssenkrupp Electrical Steel GmbH;
Thyssenkrupp Electrical
Steel UGO S.A.S.
Surface treatment for the manufacture of grain-oriented electrical steel used in magnetic circuits of electric devices, in particular magnetic cores of high-performance transformers Opinion development
0052-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal Mogul Burscheid GmbH Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty Commission decided
0054-01 Initial Chromium trioxide 215-607-8 1333-82-0 Praxair Surface Technologies GmbH Industrial spraying or brush application of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment, to ensure a high temperature corrosion & oxidation resistance, as well as anti-fouling properties or lubricity at high temperature, for automotive, aviation, power generation machinery, Oil and Gas and marine applications. Commission decided
0057-04 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics
Nexter Systems
Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided
0064-02 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category III. Opinions adopted
0070-02 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
BROWNING VIANA, FABRICA DE ARMAS E ARTIGOS DE DESPORTO SA
Industrial use of chromium trioxide in the hard chromium coating of civilian firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide a low friction coefficient as well as heat, corrosion and wear resistance properties. Commission decided
0072-01 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
Amphenol Limited
AMPHENOL SOCAPEX
ITT Cannon GmbH
Connecteurs Electriques Deutsch
TE UK Ltd
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided
0102-01 Initial Chromium trioxide 215-607-8 1333-82-0 Clariant Produkte (Deutschland) GmbH Use of chromium trioxide in a catalyst for the dehydrogenation of propane to propene Commission decided
0128-01 Initial Chromium trioxide 215-607-8 1333-82-0 Doosan Electro-Materials
Luxembourg SARL
Doosan Energy Solution Kft
Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles Opinions adopted



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live1