Skip to Content
Skip to Content

Adopted opinions and previous consultations on applications for authorisation

Adopted opinions and previous consultations on applications for authorisation

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. The table below will be updated at a later stage.

 

 
0090-02 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Industrial use of an epoxy resin hardener containing technical MDA aimed at immobilising spent ion exchange resins in a high containment matrix Commission decided
0090-01 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Formulation of an epoxy resin hardener containing technical MDA Commission decided
0153-02 Initial Anthracene oil 292-602-7 90640-80-5 BILBAINA DE ALQUITRANES, S.A. Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0151-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0152-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon bvba Use of AO for manufacture of formulations for various industrial uses Opinions adopted
0152-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Rain Carbon bvba Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0149-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Industrial Quimica del Nalon, S.A. Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0153-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 BILBAINA DE ALQUITRANES, S.A. Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0151-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0150-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Koppers Denmark ApS Use of CTPht for manufacture of formulations for various industrial uses Opinions adopted
0147-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 BILBAINA DE ALQUITRANES, S.A. Use of CTPht as a binder in the manufacture of clay targets Opinions adopted
0148-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 DEZA a.s. Use of CTPht as a binder in the manufacture of clay targets Opinions adopted
0144-01 Initial Pitch, coal tar, high-temp 266-028-2 65996-93-2 ArianeGroup SAS Industrial use of pitch, coal tar, high temp. as precursor of carbon matrix in the manufacturing of thermally and thermo-mechanically highly loaded carbon/carbon parts including nozzle throats and other critical carbon-carbon composite parts, resistant to very harsh erosion conditions, and very high temperature ranges, dedicated to high-performance civilian and military aerospace launchers. Commission decided
0121-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Ramboll Belgium BVBA [application transferred from: “Indestructible Paint Ltd.” due to a notified legal entity change] Use of pentazinc chromate octahydroxide in stoved epoxy primer for corrosion protection of aircraft engine components in aerospace and aeroderivative applications Commission decided
0121-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Indestructible Paint Ltd. Formulation of mixtures Commission decided
0118-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name];
Finalin GmbH
Use of pentazinc chromate octahydroxide in wash primer, fuel tank primer and aluminized primer for the purpose of corrosion protection in aeronautic applications Commission decided
0118-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name];
Finalin GmbH
Formulation of mixture Commission decided
0057-05 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Nexter Systems Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided
0116-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD (UK)” due to a notified legal entity change] Use of dichromium tris(chromate) for chemical conversion coating applications by aerospace and defence companies and their associated supply chains Commission decided
0045-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA Henkel Global SupplyChain B.V. Formulation of Mixtures Commission decided
0045-02 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA
Henkel Global
Supply Chain B.V.
Use of dichromium tris(chromate) for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided
0012-02 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use Commission decided
0012-04 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Industrial application of paints on metal surfaces (such as machines vehicles, structures, signs, road furniture, coil coating etc.) Commission decided
0012-12 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Professional use of solid or liquid colour premixes and pre-compounds containing pigment in the application of hotmelt road marking Authorisation expired
0012-10 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Industrial use of solid or liquid colour premixes and pre-compounds containing pigment to colour plastic or plasticised articles for non-consumer use Commission decided
0012-06 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking Authorisation expired
0012-08 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR [name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into liquid or solid premix to colour plastic/plasticised articles for non consumer use Commission decided
0047-02 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Industries (UK) Ltd
Finalin GmbH
PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Use of potassium hydroxyoctaoxodizincatedichromate in paints, in primer, sealants, and coatings (including as wash primers) Commission decided
0047-01 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Industries (UK) Ltd
Finalin GmbH
PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Formulation of Mixtures Commission decided
0072-06 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Souriau sas;
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided
0038-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Kemira Chemicals Oy Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0043-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Brenntag UK Ltd
Henkel AG & Co. KGaA
AD International BV
Formulation of Mixtures Commission decided
0063-03 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for the electrolytic passivation of tin plated steel for the packaging industry. Commission decided
0105-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Use of Sodium Dichromate as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0043-02 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Brenntag UK Ltd
Henkel AG & Co. KGaA
AD International BV
Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites and sealings of anodic films Commission decided
0037-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Ercros SA Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0036-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ELECTROQUÍMICA DE
HERNANI, S.A.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0063-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites and sealings of anodic films. Commission decided
0104-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Borealis Plastomers B.V. The use of sodium dichromate as in-situ corrosion inhibitor in a closed water/ammonia absorption cooling system Commission decided
0222-01 Review report Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing with dark colours. Opinion development
0075-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Jacobs Douwe Egberts
DE GmbH
Dr. Otto Suwelack Nachf.
GmbH & Co. KG
Européenne de Lyophilisation S.A.
Use of sodium dichromate as a corrosion inhibitor in ammonia absorption deep cooling systems as applied in the industrial production of freeze dried products such as coffee, herbs, spices and comparable products. Commission decided
0101-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ZF Luftfahrttechnik GmbH Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films Commission decided
0221-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
U. S. Steel Košice, s.r.o. Use of Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP). Opinion development
0040-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
CAFFARO BRESCIA S.r.l Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorite Commission decided
0041-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Akzo Nobel Pulp and Performance Chemicals AB
Akzo Nobel Pulp and Performance Chemicals Oy
Akzo Nobel Pulp and Performance Chemicals S.A.S.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide. Commission decided
0072-07 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided
0043-03 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Brenntag UK Ltd
Henkel AG & Co. KGaA
AD International BV
Use of Sodium dichromate for the electrolytic passivation of tin plated steel for the packaging industry Commission decided
0105-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Repackaging of Sodium Dichromate to be supplied as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0097-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change] Use of sodium dichromate for sealing after anodizing applications by aerospace companies and their suppliers Commission decided



Categories Display

Tagged as:

(click the tag to search for relevant content)


Route: .live2