Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 202-007-6 | CAS number: 90-64-2
Guidance on Safe Use
Administrative data
First-aid measures
First aid measures
Description of first aid measures
After inhalation: fresh air.
After skin contact: wash off with plenty of water. Remove contaminated clothing.
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist.
After swallowing: immediately make victim drink water (two glasses at most). Consult doctor in the event of any complaints.
Most important symptoms and effects, both acute and delayed
Irritation and corrosion
Indication of immediate medical attention and special treatment needed
No information available.
Fire-fighting measures
Extinguishing media
Suitable extinguishing media
Carbon dioxide (CO₂), Foam, Dry powder, Water
Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture
Combustible material
Development of hazardous combustion gases or vapours possible in the event of fire.
Advice for firefighters
Special protective equipment for fire-fighters
In the event of fire, wear self-contained breathing apparatus.
Further information
Prevent fire extinguishing water from contaminating surface water or the ground water system.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Avoid substance contact. Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Advice for emergency responders: Protective equipment see SDS section 8.
Environmental precautions
Do not empty into drains.
Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills.
Observe possible material restrictions (see SDS sections 7.2 and 10.5).
Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.
Reference to other sections
Indications about waste treatment see SDS section 13.
Handling and storage
Precautions for safe handling
Observe label precautions.
Conditions for safe storage, including any incompatibilities
Protected from light. Tightly closed. Dry.
Store at +15°C to +25°C.
Specific end uses
Apart from the uses mentioned in SDS section 1.2 no other specific uses are stipulated.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters
Contains no substances with occupational exposure limit values.
Exposure controls
Engineering measures
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
See section 7.1.
Individual protection measures
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Hygiene measures
Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.
Eye/face protection
Tightly fitting safety goggles
Hand protection
full contact:
Glove material:
Nitrile rubber
Glove thickness:
0,11 mm
Break through time:
> 480 min
splash contact:
Glove material:
Nitrile rubber
Glove thickness:
0,11 mm
Break through time:
> 480 min
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374).
The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types.
This recommendation applies only to the product stated in the safety data sheet<(>,<)> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves.
Other protective equipment:
protective clothing
Respiratory protection
required when dusts are generated.
Recommended Filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Environmental exposure controls
Do not empty into drains.
Stability and reactivity
Reactivity
The following applies in general to flammable organic substances and preparations: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
Chemical stability
Sensitivity to light
Possibility of hazardous reactions
Violent reactions possible with:
Strong oxidizing agents, strong reducing agents, strong alkalis
Conditions to avoid
no information available
Incompatible materials
no information available
Hazardous decomposition products
no information available
Disposal considerations
Waste treatment methods
Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself.
Contact us there if you have further questions.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
